The Coats 1250 Series Laser Guided Wheel Balancers
The Coats 1250 Series Laser Guided Wheel Balancers uses laser light to pinpoint accurate Tape-A-Weight placements and behind the spoke weight placement locations. Three models are available: model 1250-2d which uses an easy to read LED display; model 1250-3d loads all wheel parameters at once with one touch on the display; model 1250-3dv has wide angle video display which makes the machine easier to understand and operate. All models are direct drive using the motor's main shaft to mount the wheel on. This superior system reaches balancing speed quickly, and gives you a faster cycle time without component noise that can result in balancing errors.
1. LED display provides operators needed information for all 8 balancing modes. Simultaneous display of static and dynamic data identifies excess residual static imbalance; has easy to read position indicators. Integrated VFD display provides the operator with step-by-step instruction throughout the balancing process.
2. Laser guidance eliminates error by displaying exact Tape-A-Weight placement, and behind the spoke weight placement locations.
3. Automatic offset and diameter measurement with manual control backups.
4. Five second average balancing cycle begins when you lower the hood
5. Static, dynamic, four alloy options, behind the spoke (on all modes with inside weight), plus patch balance
6. Can be ordered in 28 mm or 40 mm configurations
7. No belts to slip or pulleys to wear out
8. Wheel weights bin is laid out logically so the weights you use most are at your fingertips
Specifications: has 8 balancing modes; handles tire diameter up to 44 inches; rim width is 2 to 20 inches; maximum tire weight capacity is 160 lbs.; shaft diameter available is 28 or 40 mm; shaft length is 8 5/8 inches; resolution ounces 0.01; resolution degrees 1.4; accuracy in ounces 0.1; power requirement either 220 volt single phase at 60 hz or 220 volt three phase at 60 hz; foot print 57 inches wide x 50 inches deep; shipping weight 625 lbs.; optional peg kit (8111480) available for storing accesories
To use any of the 1250 series balancers you need to order at least one of the three available adapter kits shown above. The model 1250-2d version can be ordered with either a 28 mm or 40 mm shaft so you order the Basic Kit, Extended Kit, or the Premium kit in either 28 mm or 40 mm. The 1250-3d and 1250-3dv have 40 mm shafts only. The red dots on the above chart show what items come with each adapter kit.
Balancer Prices (Also order the appropriate adapter kit, the balancer cannot be used without an adapter kit)
1250-2D Models
Model 8121250: Coats model 1250-2D wheel balancer, has 28 mm motor shaft, easy to read LED readouts, 220 volt single phase electric motor rated at 50/60 hz, wt. is 680 lbs. - Price is $5490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping required for locations in Alaska, Hawaii, and outside the U.S.
Model 812125002: Coats model 1250-2D wheel balancer, has 28 mm motor shaft, easy to read LED readouts, 220 volt three phase electric motor rated at 50/60 hz, wt. is 680 lbs. - Price is $5490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping required for locations in Alaska, Hawaii, and outside the U.S.
Model 85606431: Coats model 1250-2D wheel balancer, has 40 mm motor shaft, easy to read LED readouts, 220 volt single phase motor rated at 50/60 hz, wt. is 680 lbs. - Price is $5490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping required for locations in Alaska, Hawaii, and outside the U.S.
Model 8560643101: Coats model 1250-2D wheel balancer, has 40 mm motor shaft, easy to read LED readouts, 220 volt three phase motor rated at 50/60 hz, wt, is 680 lbs. - Price is $5490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping required for locations in Alaska, Hawaii, and outside the U.S.
Model 85009979: Coats model 1250-3D wheel balancer, has 40 mm motor shaft, has 3D LED readout and AC Vector Drive System, 220 volt single phase motor rated at 50/60 hz, wt. is 680 lbs. - Price is $5845.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping cost required for locations in Alaska, Hawaii, and outside the U.S.
Model 8500997901: Coats model 1250-3D wheel balancer, has 40 mm motor shaft, has 3D LED readout and AC Vector Drive System, 220 volt three phase motor rated at 50/60 hz, wt. is 680 lbs. - Price is $5845.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping cost required for locations in Alaska, Hawaii, and outside the U.S.
Model 85010016: Coats model 1250-3DV wheel balancer, has 40 mm motor shaft, has wide angle video display and AC Vector Drive System, 220 volt single phase motor, must be used with a 40 mm balancer adapter kit, wt. is 680 lbs. - Price is $6490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping cost required for locations in Alaska, Hawaii, and outside the U.S.
Model 8501001601: Coats model 1250-3DV wheel balancer, has 40 mm motor shaft, has wide angle video display and AC Vector Drive System, 220 volt three phase motor, must be used with a 40 mm balancer adapter kit, wt. is 680 lbs. - Price is $6490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck, additional shipping cost required for locations in Alaska, Hawaii, and outside the U.S.
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446