Coats 6065 Series Rim Clamp Tire Changer

The Coats 6065 Series Rim Clamp Tire Changer provides increased protection to your wheel service operation. The 6065 series provides the optimum in operator safety without sacrificing precision, high-volume performance. The AX & EX models give your service center the ability to handle the majority of vehicles with larger tire and rim sizes and decorative alloy wheels. The 6065 also features an operator inflation guard system that provides a safe distance between the operator and the tire during the inflation process.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Features/Specifications 6065 Series Tire Changers

Includes operator inflation guard system

Drive system delivers fast and powerful control of the wheel under heavy loads

The 6065 series includes new utility storage system for quick access to valve stems and tools

New improved stainless steel mount/demount head which increases wheel protection

Customized mount/demount head helps simplify changes from one wheel style to another

Operation: Two wheel positions 1st - loosen bead; 2nd - mount/demount

Wheels Handled: Alloy and steel

Mount/Demount Mechanism: Arm manually swings from wheel

Tool Head Offset Adjustment: Manual

Shape Of Tabletop: X-Shaped for perimeter support of the wheel

Wheel Clamping Method: Four clamps in table top actuated by one 3.75 inch fiber reinforced composite cylinder

Height Of Table From Floor 27 inches

Bead Loosening System: Foot control actuates 7 inch dual action fiber cylinder that handles 2 inch to 17 inch wide wheels

Air Drive System: 1.5 hp air (air version only)

Pressure Limiter: Standard

Bead Seating Reservoir: Located in the vertical tower with a 3.8 gallon capacity

Position Of Inflation Gauge: Permanently mounted in upper tower

Inflation Gauge: Easily calibrated 0 to 60 psi gauge w/damage resistant Lexan faceplate

Air Supply Gauge (Cal Osha): 0 to 300 psi

Water Filter with automatic drain plus oiler/lubricator is standard
Storage tray: Located on post, and is standard

Inflation guard system: Standard

Rim Diameter: 10 inches to 21 inches external; 12 inches to 24 inches internal; on AX and EX models

Rim Width: 14 inches maximum

Tire Diameter: 50 inches maximum outside

Required Air Source: 110 to 175 psi 2 hp compressor, 5 scfm at 150 psi for electric models, 5 hp compressor 14 to 15 scfm for air models

Chassis Footprint: 35 inches wide x 44 inches deep x 75 inches high

Shipping Weight: 610 lbs.

PLease Note: The price shown for Coats automatic rim clamp tire changers and heavy duty truck tire changers (excludes 4050A center post machine or manual machines) and electronic wheel balancers include factory setup and demonstration. High quality, and factory support is the reason we only sell the Coats brand of automatic tire changers and wheel balancers

Prices

Model 6065AX: Rim clamp tire changer with air drive motor; pedal actuated two position bead loosener; extended clamps; safety guard inflation station and accessory box - Price is $7049.00 delivered (price includes shipping to commercial and residential locations in the 48 states with normal delivery access, locations in Alaska, Hawaii, require additional shipping cost), ships by truck

Click Here For Information On Available Cash Discounts

Accessories:

Part 8183606: Bead Loosener Shoe Sock comes 2 per package, slips over the bead breaker shovel blade to protect chrome or painted wheels when breaking the beads (for RC-100, RC-200, And Automotive Models) - Price is $45.00 per package of 2 plus UPS $14.00 UPS shipping

Part 8182963: Plastic inserts for metal mounting head on Coats auto rim clamp models, come 12 pieces per package - Price is $40.00 per package of 12 plus $14.00 UPS shipping

Part 8183604: Clamp Sock for wheel clamps to protect chrome, aluminum, and painted wheels from scratches, plastic, they slip over the wheel clamp, easily replacable, package of 10 - Price is $58.00 plus $14.00 UPS shipping

UPS shipping on above accessories is $16.00 per order for up to 3 accessories total, or $14.00 if only one item is ordered

Part No. 8183491: Bump-N-Roll kit saves time and effort in bead loosening by making it easy to put heavier wheels in place, fits 50, 60, and 70 series rim clamp tire changers - Price is $149.00 delivered, ships by UPS

Extended Wheel Clamps For External Clamping

Part No. 8184327: X-Out clamps set allow you to externally clamp wheels, two position clamps with range from 13 to 24 inches, for external clamping only, clamps only fit Coats tire changers with X -Model type turn table, includes 4 buttons and 10 clamp socks - Price is $395.00 delivered

Additional Accessories

Tall Motorcycle Clamps For Coats Rim Clamp Series Tire Changers

Model 81845744: Set of 4 tall motorcycle clamps, the same style as on the Coats RC200 motorcycle tire changer, designed to fit Coats automotive rim clamp style tire changers - Price is $525.00 delivered per set, ships by UPS

ATV Style Clamps For Coats Rim Clamp Style Tire Changers

Model 8183585: Set of 4 ATV style 8 jaw clamps designed specifically to hold ATV wheels, for use on Coats rim clamp style tire changers (except model 9010) - Price is $469.00 per set delivered, ships by UPS

Mount/Demount Head Specifically Designed For Use With Motorcycle Wheels (Same As Used On Coats RC100 And RC200 Motorcycle Tire Changers)

Model 8183355:Mount/Demount head specifically designed for use on motorcycle wheels, this is the same head as on the Coats RC100 and RC200 motorcycle tire changers, can be used on Coats 50 and 60 series automotive rim clamp machines (will fit without additional parts on 6065 model, 50 series machines will require a tapered vertical shaft) - Price is $195.00 delivered, ships by UPS

Model 8183374: Package of 12 nylon protective inserts for above 8183355 motorcycle head above, to prevent metal to metal contact on rim - Price is $36.00 plus $14.00 shipping (no extra shipping on this item if ordered with either the mount head above or any other accessories on this page)

Click Here For Available Cash Discounts

We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

Click Here To Expand This To A Full Page Version

Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information,
And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell

For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446

Coats 6065 Series Rim Clamp Tire Changer

Click Here For Information On Available Cash Discounts

Click Here For Available Cash Discounts

Wikco.com Inc. Copyright © Wikco.Com Inc., 1997-2012 All Rights Reserved, A U.S. Corporation

Wikco.com Inc.

Copyright © Wikco.Com Inc., 1997-2012 All Rights Reserved, A U.S. Corporation