Coats Model 700 Economy Wheel Balancer For Automotive And Motorcycle Wheels (External Clamping Kit Adapter Required For Motorcycle Wheels)

The Coats Model 700 Economy Wheel Balancer offers single-spin, motorized, computer wheel balancing technology at a very reasonable price. The Coats Model 700 is the ideal balancer for cost-conscious automotive shops, and/or for shops with lower volume, and for motorcycle shops. Its direct-drive motor is an industry exclusive, providing the same single-spin balancing convenience as the higher volume models. Digital readouts and data entry eliminate dial gauges. Three balancing modes: dynamic; alloy; and static; ensure accuracy. The model 700 is a high quality electronic balancer with many features.

Model 700 Wheel Balancer

The model 700 is the recommended Coats model for motorcycle wheels. The model 700 comes standard without the hood which is the way you run the unit when balancing motorcycle wheels. To use the model 700 to balance motorcycle wheels, you need the optional External Clamping Universal Kit listed separately below and any necessary adapters.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

  • Features/Specifications

  • Speed
  • Efficient, 10 second cycle time with 14 inch wheel


  • One piece pressure cup mounting assembly - 10 turns to tighten


  • Fast, keypad data entry eliminates dials


  • Versatility


  • Dynamic, alloy, and static balancing modes


  • Removable shaft for centerless wheels using optional adaptor


  • Space-concious design for small shops and service stations


  • Back up balancer for use during busiest periods


  • Accuracy


  • Super-fast automatic self-calibration feature


  • Direct-drive allows critical measurements to be taken while wheel is coasting


  • Interference from electric motor/pulley noise is eliminated


  • Durability


  • Hardened cones to prevent grooves and wear


  • No pulleys or belts to adjust, wear, slip, or break


  • Minimum of moving parts to maintain


  • Made in the U.S.A.


  • Ease Of Use


  • Bright LED displays clearly indicate amount and location of weight


  • Convenient, no bolt-down installation


  • Ounce/gram selectable for easy conversion


  • Specifications


  • Tire Diameter: Up to 35 inches


  • Rim Width: 2 inches to 19.9 inches


  • Rim Diameter: 8 inches to 29.9 inches


  • Maximum Tire Weight: 110 lbs.


  • Resolution: +- 0.01 oz., +- 1.4 degrees


  • Accuracy: to 0.10 oz


  • Motor: 1/2 hp


  • Power Requirements: 110 VAC, 50/60 Hz, 1 phase, fused @ 15 amps


  • Shipping weight: 225 lbs.


  • Functional Work Area Required: 3.5 ft. x 5 ft. deep


  • Display: Fast, convenient keypad entry system with large LED displays make it easy to input data or access any of the Model 700's three balancing modes. Self-calibration is quick and completely automatic.


  • Drive System: Coats' patented direct-drive system incorporates shaft and motor into a single unit, increasing accuracy and reliability while eliminating belts and pulleys


  • Safety Hood: An optional safety hood no. 110935 can be installed to completely enclose the wheel during the spin cycle. This inexpensive feature is especially handy on wet and rainy days. The safety hood is not used when balancing motorcycle wheels (when balancing motorcycle wheels and using external clamping kit, the hood will not fit)


  • Standard Equipment


  • No. 110410 small centering cone (1.75 inches to 2.25 inches)


  • No. 110411 medium centering cone (2.25 inches to 3.00 inches)


  • No. 110412 large centering cone (3.00 inches to 3.60 inches)


  • No. 110542 small pressure drum (4.625 inches diameter)


  • No. 110543 Hub-nut coarse thread


  • No. 308105 no-mar ring


  • No. 308171 shaft, course thread


  • No. 308820 Spring-back cone


  • No. 309011 assembly caliper


  • Model 700 Wheel Balancer: 110 volt, for low volume shops - Price is $2919.00 delivered (includes shipping to commercial and residential addresses)


  • PLease Note: The price shown for Coats automatic rim clamp tire changers and heavy duty truck tire changers (excludes 4050A center post machine or manual machines) and electronic wheel balancers include factory setup and demonstration. High quality, and factory support is the reason we only sell the Coats brand of automatic tire changers and wheel balancers


  • Optional Equipment


  • Automotive Adapters (Motorcycle Accessories Listed Below)


  • No. 8110935: Safety hood kit for model 700 - Price is $395.00 plus $45.00 UPS shipping (no shipping on this assessory however if ordered with the balancer)


  • No. 8309060: Combi adaptor kit, for 3, 4, 5, 6, 8, 10 lug mounting - Price is $699.00 plus $35.00 UPS shipping (no shipping on this accessory however if ordered with the balancer)


  • No. 8309067: Truck cone kit for light trucks up to one ton (3.38 inches - 5.88 inches center hole) - Price is $405.00 plus $35.00 UPS shipping (no shipping on this accessory however if ordered with the balancer)



    • Specification Chart Coats Electronic Wheel Balancers

    The specifications chart shows the current specifications for Coats electronic wheel balancers. The chart compares the important specifications between all the models.

    Specifications Coats Wheel Balancers

  • Accessories - Add shipping to all accessories, unless they are ordered with a balancer, then shipping is paid on these items also.


  • No. 8110410: Small cone, 1.75 inches to 2.25 inches diameter center holes - Price is $88.00 plus $14.00 UPS shipping (unless purchased with balancer)


  • No. 8110411: Medium cone, 2.25 inches to 3.00 inchs diameter center holes - Price is $99.00 plus $14.00 UPS shipping (unless purchased with balancer)


  • No. 8110412: Large cone, 3.00 inches to 3.60 inches diameter center holes - Price is $125.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8111539: Light truck cone kit - Price is $69.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8111829C: Truck kit, 1.125 inch ID, spacer and cone for 19.5 inch hub centered wheels with centerhole from 8.52 inches to 8.89 inches - Price is $995.00 plus $20.00 UPS shipping (unless purchased with balancer)


  • No. 8111935: Spacer, light truck & Viper back cone - Price is $249.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8112420: Short cone, balancer, 1.125 inches, id range 2.650 inches to 3.025 inches - Price is $199.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308069: Minature cone, 1.70 inches to 2.25 inches center holes for 600, 650, 700, 850, 1001, 1004, (4 cone system - Prior to March 1992) - Price is $88.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308095: Cone, light truck, 3.375 inches to 5.00 inches diameter center holes, for 600, 650, 700, 850, 950, 1001, 1004, 1050 - Price is $149.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308096: Cone, small - 2.25 inches to 2.62 inches Center holes, for 600, 650, 850, 1001, 1004, (four cone system prior to March 1992) - Price is $99.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308097: Cone, medium 2.62 inches to 3.00 inches center holes, for 600, 650, 850, 1001, 1004, (four cone system prior to Marche 1992) - Price is $110.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308098: Cone, large 3.00 inches to 3.25 inches center holes, for 600, 650, 850, 1001, 1004, four cone system prior to March 1992) - Price is $129.00 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308101: Spring for models 600, 650, 700, 850, 1001, 1004 (four cone system - prior to March 1992) -Price is $9.95 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8308131: Lug wrench, combi adapter - star wrench assembly -Price is $32.00 plus $13.00 UPS shipping (unless purchased with a balancer)


  • No. 8308820: Spring - for models 600, 650, 700, 850, 950, 1001, 1004, (3 cone system from March 1992) -Price is $8.80 plus $13.00 UPS shipping (unless purchased with balancer)


  • No. 8309060: Combi adapter kit (3, 4, 5, 6, 8, 10 lug), for 600, 650, 700, 850, 950, 1001, 1004, 1050 - Price is $ 895.00 plus $20.00 UPS shipping (unless purchased with balancer)


  • No. 8309067: Cone kit, light trucks up to one ton - 3.375 to 5.88 inches center holes - Price is $550.00 plus $20.00 UPS shipping (unless purchased with balancer)


  • No. 8309069: Cone, light trucks 3.375 to 5.88 inches diameter center holes, for 600, 650, 700, 850, 950, 1001, 1004, 1050 - Price is $245.00 plus $13.00 UPS shipping (unless purchased with a balancer)


    • Motorcycle Clamp Accessory And Adapters For Model 700 Balancer


  • The Standard Motorcycle Clamping system below comes with a shaft and adapters to accomodate American, Japanese, and European Motorcycles with an axle diameter up to .750 (3/4 inch). For Newer Harleys and Custom choppers with 1 inch axles and up to 13.5 inch wide hubs, order adapter kit 85000248 listed below


    • Motorcycle Wheel Adapter For Model 700
    Motorcycle Wheel Adapter
    Motorcycle Wheel Adapter
    Motorcycle Wheel Adapter
    Motorcycle Wheel Adapter
    Parts Included
  • Above Illustration Shows The Parts Included


  • Various Replacement Parts For Universal Clamping Kit For Motorcycle Wheels - Complete Adapter Kits Kits Shown Below


  • Part No. 111783: Wheel Shaft - Price is $177.00 plus UPS shipping (see below)


  • Part No. 111784: Centering Cone - Price is $103.50 each (2 required), plus UPS shipping (see below)


  • Part No. 111786: Spacer - Price is $51.67 each (2 required) plus UPS shipping (see below)


  • Part No. 111789: BMW Bushing - Price is $51.67 each (2 required), plus UPS shipping (see below)


  • Part No. 111792: BMW Cones - This particular replacement part is obsolete


  • For other parts on the drawing not listed above, please e-mail us at: sales@wikco.com


  • Replacement parts listed directly above are plus UPS shipping which is $14.00 minimum per order for 1 or more items ups to 20 lbs.



    • You will need to order No. 111864 below to go with model 700 to be able to balance motorcycle wheels.....this kit works for axles up to 3/4 inch diameter (0.750).....for newer Harleys and custom choppers with 1 inch diameter axles and hub widths up to 13.5 inches, you also need to order adapter kit 85000248.....the other adapter kits listed below are for the standard clamp kit, and eliminate the need to remove the bearings on 3/4 inch and smaller axles on Harleys....the standard clamp kit handles all metric motorcycles

  • No. 8111864: External clamping universal kit (required for all motorcycles), for axle shafts up to 3/4 inches in diameter (for 1 inch axles and wider hubs, see the optional kit required below) - Price is $1550.00 delivered


  • The Standard Motorcycle Clamping system above comes with a shaft and adapters to accomodate American, Japanese, and European Motorcycles with an axle diameter up to .750 (3/4 inch). For Newer Harleys and Custom choppers with 1 inch axles and up to 13.5 inch wide hubs, order adapter kit 85000248 listed below


  • Order the complete motorcycle adapters kits needed


  • No. 8112903: Motorcycle wheel balancer adapter, 17mm, two bushings, fits universal clamping kit above, for Harley Davidson with Buell wheels, eliminates the need to remove bearings, 14 mm I.D. - Price is $135.00 plus $13.00 UPS shipping (unless ordered with a balancer, then shipping is paid)


  • No. 8112904: Motorcycle wheel balancer adapter, 20mm, two bushings, fits universal clamping kit above, for Harley Davidison with Buell wheels, eliminates the need to remove bearings, 14mm I.D. - Price is $135.00 plus $13.00 UPS shipping (unless ordered with a balancer, then shipping is paid)


  • No. 8112905: Motorcycle wheel balancer adapter kit, 17mm, 20mm, and .750 inches, two bushings each size, fits universal clamping kit above, for Harley Davidson wheels, eliminates the need to remove bearings, 14mm I.D. - Price is $365.00 plus shipping (unless ordered with a balancer, then shipping is paid)


  • No. 8112907: Motorcycle wheel balancer adapter, .750 inches (19.09mm), two bushings each size, for Harley Davidson wheels, eliminates the need to remove bearings, 14mm I.D. - Price is $135.00 plus $13.00 UPS shipping (unless ordered with a balancer, then shipping is paid)


  • No. 85000248: 1 inch diameter motorcycle shaft kit - direct fit for late model Harley -Davison and custom wheel assemblies with a 1 inch diameter axle and hub widths to 13.5 inches, designed specifically for use with model 700 and motorcycle adapter kit (must have motorcycle adapter as shown in photos below) - Price is $349.00 plus $13.00 UPS shipping (no extra shipping on this item if ordered with the balancer or 8111864 adapter kit)


    • Shaft and Bushing Kit for exclusive use with Coats 700 balancer and 8111864 Motorcycle Adapter Kit

    Kit 85000248 includes 1 1/8 inch ID Spacer, 1 inch balancer shaft, 1 inch ID spacers (3), one shaft nut LH threads

    We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on cached webpages (copies of our web pages on the search engines) that are out of date. To make sure you are viewing current as possible information and pricing, type in our web address: www.wikco.com and/or the specific page address you are looking at, and type this address in the go button on your browser to get to our web site live.

    Click Here To Expand This To A Full Page Version

    We sell direct to the end user.

    To Order: Click On The Order Form Button Below For Ordering And Payment Information
    Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com
    Please review all information on our web site
    If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-2009 All Rights Reserved