Coats Model 850 Standard Wheel Balancer

The Coats Model 850 Standard Wheel Balancer is one of Coats best sellers. The Coats 850 wheel balancer is designed for full-service, high quality shops, and any shop that needs a dependable back-up balancer for extra busy days. The Coats model 850 wheel balancer offers high quality features such as: efficient keypad entry. Red LED displays indicate weight locations and amounts. The model 850 is self-calibrating and offers the same direct-drive system found in all Coats balancers. The Coats 850 brings high performance to smaller shops without sacrificing quality, dependibility or accuracy.

• Features/Specifications - Coats 850 Wheel Balancer
  
• Self-Calibrating
• 1/2 hp electric motor
• Cycle time with a 14 inch wheel is 10 seconds (the next 3 more expensive Coats units have a cycle time of 5 seconds)
• Standard centering cones included: 3 hardened auto, 1 for light trucks
• Has ounce/gram selector switch
• Removable stub shaft
• Balancing modes: Dynamic; alloy; static
• Installation: no bolt down
• Tire Diameter: Up to 40 inches
• Rim Diameter: 2 inches - 19.9 inches
• Maximum Tire Weight: 125 lbs.
• Useable Shaft: diameter - 1.125 inches, length - 6.625 inches
• Resolution: Ounces - 0.01, Degrees - 1.4 degrees
• Accuracy in ounces: 0.1 oz
• Power Requirements: 110, 230 volt-1 phase, 50/60 hz* (*50 hz not UL listed, can be wired for European use 50 hz)
• Balancer Footprint: 49.5 inches wide, 49 inches deep
• Shipping Weight: 437 lbs.
• PLease Note: The price shown for Coats automatic rim clamp tire changers and heavy duty truck tire changers (excludes 4050A center post machine or manual machines) and electronic wheel balancers include factory setup and demonstration. High quality, and factory support is the reason we only sell the Coats brand of automatic tire changers and wheel balancers



• Model 850 Wheel Balancer: Wheel balancer for medium volume shops, 110 volt - Price is $4282.00 delivered



Click Here For Comparison Information On Coats Balancers And Identification And Illustrations Of Balancing Cone And Pin Plate Adapters



Specification Chart Coats Electronic Wheel Balancers

The specifications chart shows the current specifications for Coats electronic wheel balancers. The chart compares the important specifications between all the models.




• Accessories - Add shipping to all accessories, unless they are ordered with a balancer, then shipping is paid on these items also.


• No. 110410: Small cone, 1.75 inches to 2.25 inches diameter center holes - Price is $79.00 plus shipping (unless purchased with balancer)


• No. 110411: Medium cone, 2.25 inches to 3.00 inches diameter center holes - Price is $89.00 plus shipping (unless purchased with balancer)


• No. 110412: Large cone, 3.00 inches to 3.60 inches diameter center holes - Price is $114.00 plus shipping (unless purchased with balancer)


• No. 111539: Light truck cone kit - Price is $65.00 plus shipping (unless purchased with balancer)


• No. 111827: Cone, 1.125 inches (28mm)ID, for 19.5 inch hub centered wheels with centerhole from 8.52 to 8.89 inches - Price is $295.00 plus shipping (unless purchased with balancer)


• No. 111828: Backing plate, 1.125 (28mm) ID for 19.5 inch hub centered wheels with centerhole from 8.52 to 8.89 inches (216.41-225.8mm) - Price is $339.00 plus shipping (unless purchased with a balancer)


• No. 111829C: Truck kit, 1.125 inch ID, spacer and cone for 19.5 inch hub centered wheels with centerhole from 8.52 inches to 8.89 inches - Price is $895.00 plus shipping (unless purchased with balancer)


• No. 111935: Spacer, light truck & Viper back cone - Price is $229.00 plus shipping (unless purchased with balancer)


• No. 112168: Cone, medium, B1, 1.125 inches (28mm) ID, range 2.25 inches to 3.00 inches (57.15-76.20mm) - Price is $99.00 plus shipping (unless purchased with balancer)


• No. 112420: Short cone, balancer, 1.125 inches, id range 2.650 inches to 3.025 inches - Price is $189.00 plus shipping (unless purchased with balancer)


• No. 308069: Minature cone, 1.70 inches to 2.25 inches center holes for 600, 650, 700, 850, 1001, 1004, (4 cone system - Prior to March 1992) - Price is $79.00 plus shipping (unless purchased with balancer)


• No. 308095: Cone, light truck, 3.375 inches to 5.00 inches diameter center holes, for 600, 650, 700, 850, 950, 1001, 1004, 1050 - Price is $139.00 plus shipping (unless purchased with balancer)


• No. 308096: Cone, small - 2.25 inches to 2.62 inches Center holes, for 600, 650, 850, 1001, 1004, (four cone system prior to March 1992) - Price is $89.00 plus shipping (unless purchased with balancer)


• No. 308097: Cone, medium 2.62 inches to 3.00 inches center holes, for 600, 650, 850, 1001, 1004, (four cone system prior to Marche 1992) - Price is $95.00 plus shipping (unless purchased with balancer)


• No. 308098: Cone, large 3.00 inches to 3.25 inches center holes, for 600, 650, 850, 1001, 1004, four cone system prior to March 1992) - Price is $119.00 plus shipping (unless purchasedwith balancer)


• No. 308101: Spring for models 600, 650, 700, 850, 1001, 1004 (four cone system - prior to March 1992) -Price is $8.06 plus shipping (unless purchased with balancer)
• No. 308130: Wrench, combi tool - allen -Price is $8.86 plus shipping (unless purchased with balancer)


• No. 308131: Lug wrench, combi adapter - star wrench assembly -Price is $29.00 plus shipping (unless purchased with a balancer)


• No. 308820: Spring - for models 600, 650, 700, 850, 950, 1001, 1004, (3 cone system from March 1992) -Price is $8.45 plus shipping (unless purchased with balancer)


• No. 309060: Combi adapter kit (3, 4, 5, 6, 8, 10 lug), for 600, 650, 700, 850, 950, 1001, 1004, 1050 - Price is $795.00 plus shipping (unless purchased with balancer)


• No. 309067: Cone kit, light trucks up to one ton - 3.375 to 5.88 inches center holes - Price is $495.00 plus shipping (unless purchased with balancer)


• No. 309068: Spacer - light trucks - 600, 650, 700, 850, 950, 1001, 1004, 1050, 2000 balancer models - Price is $295.00 plus shipping (unless purchased with balancer)


• 309069: Cone, light trucks 3.375 to 5.88 inches diameter center holes, for 600, 650, 700, 850, 950, 1001, 1004, 1050 - Price is $199.00 plus shipping (unless purchased with a balancer)


Click Here To Expand This To A Full Page Version



Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You





If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell



Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine

Click Here To Expand This To A Full Page Version



Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine





For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com

Wikco.com Inc.
Please review all information on our web site
If you have questions, E-Mail us at: sales@wikco.com
Or Call 520-316-0446 Or Fax us at 520-316-0446


Email Us at sales@wikco.com

Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved