Wikco Motorcycle Wheel Balancer - Spin Balancer Model BMC112
The Wikco Motorcycle Spin Type Wheel Balancer is the perfect tool for small shops, clubs, and individuals that need an inexpensive, easy to use, wheel balancer for motorcycle wheels. The Wikco Wheel Balancer fits most motorcycle wheels (motorcycles with shaft drive and/or single sided swing arms may need a special adapter which we can supply, see below). The unit can set on a table top or be clamped into the Wikco MC110.100 rim clamp motorcycle tire changer, or most other rim clamp motorcycle tire changers. If you want to set this on your work bench instead of on our tire changer, the large round base makes the balancer more stable.
To See Other Products - Click Here To Go To Our Index
The Wikco Motorcycle Wheel Balancer also comes with extra features that other balancers don't, including a bubble level to make sure the balancer is level, and a magnetic holder and rod to true laced (spoked wheels), and make sure cast are true and haven't been bent. The model BMC112 motorcycle wheel balancer also has several optional cone sets available you can purchase, so you can balance the wheels on virtually all motorcycles.
- Features/Specifications - Wikco Motorcycle Wheel Balancer
- Easy to use spin-type wheel balancer works for motorcycle wheels that have a center hole through the rim
- Custom adapters available for shaft drive bikes and/or bikes with a single sided swing arm
- Maximum wheel diameter that can be accommodated is 30 inches (diameter of complete assembly, 1/2 of diameter (15 inches) can hang below balancer axle
- Maximum wheel width on standard axle type wheels with the standard cones that come with it is 8 inches for Japanese bikes with small axles if the cones only press against the sides of the bearings. On larger bearing holes on all bikes maximum width depends upon how far the cones insert into the hole in the bearing - on wheels with a 3/4 inch axle, the maximum hub width is 8.5 inches, and on one inch axles the maximum hub width is 9 inches. Bikes that have single sided swing arms the maximum rim width is approximately 8 inches depending upon the wheel
- Comes with level to level balancer
- Extra large round base makes balancer more stable whether you mount it on top of the Wikco Motorcycle Tire Changer by clamping it in the jaws of the motrocycle vise, or by setting it on top of your work bench
- Also includes tire crayon to mark wheel with
- Comes standard with magnetic base and metal reference rod to determine whether or not wheel is running true by checking wheel runnout, checks for radial and lateral wheel runnout
- Locking cones center and hold wheel on balancer shaft for proper operation and accuracy when balancing a wheel
- All steel construction for years of service
- Wheel balancer is perfect for use by small shops, bike clubs, and individuals that want to be able to balance motorcycle wheels easily; balances within 1/4 ounce.
- Model BMC112: Manual motorcycle wheel spin balancer, accepts standard motorcycle wheels, shaft drive bikes and single sided swing arm bikes may require a custom adapter, see special offer below, wt. is 32 lbs. - Price is $236.00 delivered
- Custom wheel adapters are currently available if needed
- Model 112-6: Wheel cone, standard size two of these come with the balancer, maximum diameter 1.125 inches (1 1/8), minimum diameter .5 inches, length 1.125 inches - Price is $21.95 per cone plus UPS
- Model CWA1: Wheel cone, one of pair that is used for Honda VFR models, maximum diameter 1.375 inches, minimum diameter .815 inches, length 1.75 inches - Price is $21.95 per cone plus shipping
- Model CWA2: Wheel cone, used for most BMW motorcycles with single sided swing arms on back wheel, maximum diameter 1.75 inches, minimum diameter 1.125 inches, length 1.75 inches - Price is $21.95 per cone plus shipping
- Model CWA3: Wheel cone, one of pair that is used for Honda VFR models, maximum diameter 2.25 inches, minimum diameter 1.642 inches, length 1.75 inches - Price is $21.95 each plus shipping
- Model CWA4: Wheel cone, for any rim with large hole in rim, has 2.25 inch hole minimum, with 0.50 wide step, then up to maximum diameter of 2.40 inches, total cone length is 1.75 inches - Price is $21.95 each plus shipping
- Wheel Weights
- Model 9405-C: Tape-A-Weight adhesive backed, chrome plated wheel weights for motorcycle wheels are easy to apply. Each box has 12 strips, 1/2 inch wide, each strip weighs 6 ounces and is segmented and marked so weights can be easily cut into as little as 1/2 or 1/4 ounce segments as marked - Price is $39.95 per box delivered
- When you balance tires you also need to change them. We also offer the MC110.100 and MC110.200 Motorcycle tire changers for changing tires on motorcycle wheels. These tire changers also allow you to clamp in the BMC112 balancer if you don't want to set it on your work bench. The MC110.100 and MC110.200 are manufactured in the USA. This design was originally developed by us in the 1980's and we have been manufacturing it ever since. The MC110.100 is our deluxe model and lets you easily change tires on motorcycle wheels, ATVs, cars, pickups and lawn and garden equipment. The MC110.200 is our new version that is best used for motorcycle and ATV tires. Both models use our deluxe motorcycle clamps with replaceable clamp pads so the rim doesn't touch any surface on the clamp. The mount demount tool also has nylon protective ends to prevent scratching and gouging of the rim. Our special nylon covered motorcycle bead breaker shoe that comes with both models also protects the rim from damage.
- Model MC110.100 Deluxe Version Motorcycle Tire Changer (shown on the left above) is $499.00 plus $35.00 UPS Shipping
- Model MC110.200 Motorcycle Tire Changer (shown on the right above) Is $399.00 plus $35.00 UPS Shipping
- For more information on either the Wikco MC110.100 Motorcycle Tire Changer or MC110.200 Motorcycle Tire Changer shown above, click on the link below.
Special Promotion - On MC110.100 And BMC112 Wheel Balancer
Wikco.Com is a national equipment dealer selling direct to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
Please review all information on our web site
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446
Wikco.com Inc.
Copyright © Wikco.Com Inc., 1997-2009 All Rights Reserved