The APX90 A/E Rim Clamp Tire Changer

The Coats APX90 A/E Rim Clamp Tire Changer is designed for larger, more expensive and harder to change tires on low profile custom wheels, run flat tires, and PAX type tires (PAX tires require optional accessory kit). Lets you change all these tires without strenuous effort and without damage to these expensive custom wheels. The APX90 A/E is also the most efficient way to change tires on conventional wheels. The APX90 A/E can handle nearly any application with the ability to service wheels with rim diameters from 9 to 30 inches clamping them externally and without the need for additional adapters. You can clamp wheels as large as 32 inches if you clamp them internally.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Features/Specifications

Specifications APX90 Rim Clamp Tire Changer

Large clamping capacity externally clamps rims up to 30 inches in diameter down to as small as 9 inches

Hi-torque electric turntable gives you high start-up torque giving you the power you need for tough applications

Three position bead loosener provides complete control, reducing wait time and minimizing risk of wheel damage

Integrated wheel lift to lift heavy assemblies reducing both wheel damage risk and muscle strain for technicians

Duckhead roller prevents top bead from flipping over Duckhead on large, stiff sidewall tires

RoboArm applies pressure to create bead lock and hold top bead in drop center when mounting

RoboRoller provides extra leverage for large diameter runflat and low profile tires

Horizontal power rollers allow easy bead and rim lubrication, loosen top beads, and assist in mounting run flat and low-profile tires

Ergonomically positioned foot pedals and helper controls

Maximum rim width is 16 inches, maximum tire diameter is 44 inches

Drive system is available with either air or electric drive

1. Large clamping capacity - externally clamps wheels up to 30 inches in diameter and as small as 9 inches in diameter

2. Hi-torque electric turntable for high start-up torque for tough applications

3. Three position bead loosener provides complete control reducing waiting time and minimizing risk of wheel damage

4. Integrated wheel lift to lift heavy assemblies, reducing both wheel damage and risk of operator injury caused by muscle strain

5. Duckhead roller prevents top bead from flipping over Duckhead on large, stiff, sidewall tires.

6. RoboArm applies pressure to create bead lock and hold top bead in drop center when mounting

7. RoboRoller gives you extra leverage for large diameter runflat and low profile tires

8. Horizontal power rollers allow easy bead and rim lubrication, loosen top beads, and assist in mounting run flat and low profile tires

9. Has ergonomically positioned foot pedals and helper contols

Model APX90 Rim Clamp Tire Changer - Service Wheels Up To 30 Inches Without Special Adapters

Service wheels up to 30 inches in diameter without special adapters - Coat's exclusive X-shaped tabletop provides constant clamping pressure to provide optimal support and control

Wheel lift reduces effort and lessens damage risk

Coat's exclusive bead loosening design enables power in, power out, and stop control over the bead loosening shoe, eliminating cylinder travel time with the shoe moving only as much as required which increases productivity and reduces risk of wheel damage
The powered horizontal rollers are used to demount the bottom bead with no tire tool required. The patented RoboArm can be used for additional assistance when demounting the bottom bead

Includes The Patented RoboArm, The Duckhead Roller, Powered Horizontal Rollers, And The RoboRoller, Four Helper Devices For Total Control

Reference 1 - The RoboArm, Reference 2 - The Duckhead roller, Reference 3 - Powered Horizontal Rollers, Reference 4 - The RoboRoller

Available with either electric or air powered turntable

Wheels handled: Steel, Alloy, high-performance, and PAX (with optional accessory kit)

Rim diameters handled: 9 inches to 30 inches outside clamping; 11 inches to 32 inches inside clamping

Maximum tire width is 16 inches, maximum tire diameter is 44 inches

Mount/Demount mechansim - tilt back with automatic safety lock

Tool head offset adjustment - pneumatic lift, set back, and lock, 18 inch clearance duckhead to clamps

X-shaped table top for rigid perimeter support of the wheel

Four self-cleaning and self-centering clamps in table top actuated by two pneumatic cylinders

Bead loosening system is a hand actuated dual action cylinder and works for wheels up to 16 inches wide

Bead seating reservoir - is a 5.7 gal separate tank, pressure protected

Has a pressure limiter standard

Filter lubricator is standard with automatic drain and large capacity lubricator bowl

Inflation guage is easily calibrated 0 to 60 psi gauge with protection to 200 psi, damage resistant Lexan faceplate

Electric drive system uses a 2 hp hi-torque 110 volt single phase motor, 25 amp

Required air source - 110 to 175 psi 2 hp compressor, 5 scfm@150 psi if you purchase the electric model, and 15 scfm@150 psi if you purchase the air drive model (which will not have the electric motor)

Operating footprint is 90 x 102 inches, shipping weight is 1510 lbs.

Part number 850002221: Model APX90A rim clamp tire changer with air drive turntable (requires a 2 hp compresser rated at 15 scfm@150psi) - Price is $12,999.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost. E-mail us for a freight quote if needed.), ships by truck

Part number 85000222: Mode APX90E rim clamp tire changer with electric drive turntable, 110 volt, 25 amp - Price is $12,999.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost. E-mail us for a freight quote if needed.), ships by truck

Click Here For Available Cash Discounts

We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

Click Here To Expand This To A Full Page Version

Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information,
And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell

For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446

The APX90 A/E Rim Clamp Tire Changer

Click Here For Available Cash Discounts

Wikco.com Inc. Copyright © Wikco.Com Inc., 1997-2012 All Rights Reserved, A U.S. Corporation

Wikco.com Inc.

Copyright © Wikco.Com Inc., 1997-2012 All Rights Reserved, A U.S. Corporation