Industrial Metal Cutting Horizontal Miter Bandsaws

These Industrial Grade Metal Cutting Horizontal Miter Bandsaws are designed for use in machine shops and factories than need high quality saws for production work. All units have variable blade speed and have adjustable angle vises for cutting materials and different angles; when equiped with the proper blade, these saws are perfect for cutting mild steel, aluminum, stainless steel, chromoly, brass, bronze and more. These saws are miter type bandsaws and are excellent for cutting solid rounds, rectangles, tubing, and pipe at any angle up to 60 degrees. The saws are available in manual and semi-automatic versions.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

BS-260 Series Bandsaws Manual And Semi-Automatic
BS-330 Series Bandsaws Manual And Semi-Automatic

Manual descent models shut off the blade after each cut; the operator then lifts the head to prepare for the next cut. The semi-automatic band saws have hydraulic clamping and a hydraulic saw head lift that activates after the saw is done cutting. All models are gear driven and have a heavy cast iron saw head and base; the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Safety limit switches ensure that if the blade guards are open, the machine can't operate; in addition, each band saw has a powerful coolant system and a broken blade tensioning devise that shuts down the machine if the blade breaks.

BS-350 Series Bandsaws Manual And Semi-Automatic

  • Features/Specifications


    • 260 Series Miter Bandsaws

    BS-260 Series Bandsaws Manual And Semi-Automatic

    • Features/Specifications - BS-260M - Manual Model


    • Model BS-260M offers two cutting functions - manual descent for small production runs controlled by the operator turning on the machine via a trigger switch in the descent handle and manually guiding the saw blade through the material. The operator then lets go of the trigger switch to shut-off the machine when the cut is complete. Hydraulic descent is for larger production runs and increases blade life and reduces operator fatigue. To operate, press the green start button to start the blade and coolant wash, and then adjust the hydraulic descent for feed pressure. When the cut is complete, the saw and coolant pump will automatically shut-off via a limit switch. The saw head is manually lifted to reset the hydraulic descent for the next cut.


    • Blade size is 1 inch x .035 thick x 8 ft. long


    • Variable blade speed from 114 ft. to 262 ft. per minute


    • Has a 2 hp motor, operates on 220 volt, 60 hz, single phase power


    • Saw measures 61 inches long x 29 inches wide x 42 inches high - table height is 35 inches


    • Weight is 620 lbs.


    • Broken blade tension device shuts down machine if blade breaks


    • Cast iron saw head provides rigidity and swivels in two directions (dual mitering), 0-60 degrees to right, and -045 degrees to left


    • Direct gear drive helps extend saw blade life and allows the saw head to make more accurate cuts and cut faster


    • Has dual descent modes - manual descent by pulling down on handle and actuating the trigger switch, and hydraulic descent feed can be adjusted by the operator


    • Powerful coolant pump cools blade and assists chip removal system and extends blade life. It is recommended using an petroleum based or synthetic based coolant that you would typically mix with a 1 to 10 ratio coolant to water.


    • A miter saw, has a maximum capacity of 9 inches, and is perfect for cutting 90 degrees or miter angles


    • Round capacity is 9 inches at 90 degrees, 6 inches at 45 degrees, 3.5 inches at 60 degrees, and 4.25 inches at 45 degrees left


    • Square capacity is 8.5 inches at 90 degrees, 5 3/4 inches at 45 degrees, 3 3/8 inches at 60 degrees, and 4.25 inches at 45 degrees left


    • Rectangle capacity is 8 inches x 9.5 inches at 90 degrees, 8 inches x 6 inches at 45 degrees, 3 3/8 inches x 3 3/8 inches at 60 degrees, and 6 1/4 inches x 4 1/4 inches at 45 degrees left


    • Dual angle head has quick releases allowing you to change the miter angle in seconds


    • This is the perfect bandsaw for cutting solids, tube or pipe, angle iron and more. Great for cutting ferrous and non-ferrous metals such as aluminum, mild steel, stainless steel, chromoly or brass


    • Model BS-260M: Manual descent miter bandsaw, 9 inch maximum capacity (see above), wt. is 620 lbs. - Price is $4695.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


    • Features/Specifications - Model BS-260SA (Semi-Automatic Version)


    • Semi-Automatic version of above. The semi-automatic model uses a powerful hydraulic system for clamping the vise and lifting the saw head after the cut has been completed, and the saw blade comes to a stop. The hydraulic descent is adjustable depending on the material you wish to cut, blade type, and blade speed.


    • Appearance of the saw is exactly the same except for the free standing vise control with footpedal lever and start/stop button on pedestal that connects to the front side of the saw via a hydraulic line


    • The other features and capacities of this saw are the same as the manual model BS-260M


    • Model BS-260SA: Semi-automatic version of 260 series miter saw, with hydraulic vise control, and in addition to the hydraulic descent (that is on manual model) the saw head lifts after the cut is complete, and the blade stops, 2 hp motor is 220 volt 60 hz single phase, machine wt. is 836 lbs. - Price is $7225.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


      • 330 Series Miter Bandsaws

      330 Series Miter Bandsaws

    • Features/Specifications - Model BS-330M - Manual Model


    • BS-330M Single Miter Horizontal Bandsaw is a manual model that is designed for larger production runs - it has adjustable hydraulic descent, with manual lifting of the cutting head back into the start position, and manual tightening and release of the vise. Its larger capacity gives you a great saw for production work, and saving you money over the semi-automatic version which is available


    • The hydraulic descent has a down feed adjustment for feed pressure, and when the cut is completed the saw will automatically shut-off, then like all the manual models, you lift the head manually to set it for the next cut


    • The 330 series saws can cut up to 13 inch OD capacities: round is 13 inch diameter at 90 degrees, 10 1/2 inch diameter at 45 degrees, and 13 inch diameter at 30 degrees, retangular material - 13 inches x 18 1/2 inches at 90 degrees, 11 3/4 inches x 10 3/4 inches at 45 degrees, and 13 inches x 16 inches at 30 degrees


    • The 330 saws use a 1 1/4 inch band saw blade, making it an extremely accurate and fast cutting saw


    • The saw head provides rigidity and swivels 0-45 degrees


    • Direct gear drive helps extend saw life and allows saw head to make more accurate cuts and cut faster


    • Hydraulic descent feed can be adjusted by the operator


    • A powerful coolant pump cools blade and assists chip removal


    • Broken blade tension devise shuts down machine if blade breaks


    • The 330 series saws have a 3 hp motor, 220 volt three phase is required


    • Has variable blade speed from 114 to 262 ft. per minute


    • Saw weight is 1650 lbs., dimensions are 90 inches long x 38 inches wide x 58 inches high


    • Model BS-330M: Single miter horizontal bandsaw, 3 hp, three phase motor, cuts up to 13 inch OD round, hydraulic descent with auto stop, manual lift/reset, wt. is 1650 lbs. - Price is $9645.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


    • Features/Specifications - BS-330SA - Semi-Automatic Model


    • Apprearance is the same as BS-330M accept instead of control box mounted on top of saw rail, this larger square controll box is mounted on the front of the frame via an L-shaped arm, hydraulic lines go from control box to the vise


    • In addition to controlled blade descent and variable blade speed standard on both models, the BS-330SA semi-automatic model has a hydraulically controlled clamping vise, and at the end of the cut when the blade shuts off, the hydraulics lift the saw head up into the starting position and the vise releases and you are ready for the next cut


    • Material cutting capacities are of course the same as the BS-330M manual model


    • With the addition of the hydraulic vise and hydraulic raise/reset feature on the semi-automatic unit, this is even a faster production saw and minimizes operator fatigue


    • Model BS-330SA: Semi-automatic 330 series single miter horizontal bandsaw, 3 hp three phase motor, variable speed, wt. is 1650 lbs. - Price is $13,345.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


      • 350 Series Dual Miter Bandsaws

      350 Series Dual Miter Bandsaws Manual And Semi-automatic

    • Features/Specifications - Model BS-350M Manual Model


    • This is a dual miter model - saw head can be turned in both directions cutting capacities at these positions are: maximum of 10 1/2 inch diameter round at 90 degrees, 9 1/2 inch diameter round at 45 degrees, 6 5 /16 inches at 60 degrees, and 8 1/4 inches at 45 degrees left, Square is 10 inches at 90 degrees, 8 3/4 inches at 45 degrees, 6 inches at 60 degrees, and 7 inches at 45 degrees left, Rectangle is 13 3/4 inches x 8 1/2 inches at 90 degrees, 9 1/2 inches x 6 5/16 inches at 45 degrees, 6 inches x 6 inches at 60 degrees, and 7 inches by 7 inches at 45 degrees left


    • Saw uses a 1 inche x .035 inch x 10 ft. 6 inch long blade


    • Variable blade speed of 114 to 262 ft. per minute


    • Powered by a 2 hp electric motor, 220 volt 60 hz single phase


    • Saw is 74 inches long x 30 inches wide x 44 inches high with a table height of 35 inches, saw weight is 800 lbs.


    • Broken blade tension device shuts down machine if the blade breaks


    • Two cutting modes - either manual or hydraulically controlled descent


    • Cast iron saw head provides rigidity and swivels in two directions 0-60 degrees to right and 0-45 degrees left


    • Direct gear drive helps extend saw life and allows saw head to make more accurate cuts and cut faster


    • Dual decent modes - manual descent by pulling down on handle and activating trigger switch, Hydraulic descent feed can be adjusted by operator


    • These bandsaws have DC variable speed drive that offers consistant torque even at slower speeds, increasing blade life


    • Model BS-350M: 350 series dual mitre bandsaw, manual model - has hydraulic descent, manual lift/reset, can also be used completely manual, manual vise, 2 hp motor, 220 volt single phase, machine weight is 800 lbs. - Price is $5625.00 delivered (price includes shipping to commercial and residential locations)


    • Features/Specifications - Model BS-350SA - Semi-Automatic Model


    • Same basic features as manual model BS-350M accept in addition to controlled hydraulic descent, when cut is done saw shuts off and saw head raises in to reset/start position, also vise in hydraulically controlled, connected to the front of the saw frame by hydraulic lines is a free standing foot pedal control pedestal mounted switch


    • Model BS-350SA: 350 series dual miter semi-automatic bandsaw with hydraulic vise, 220 volt 60 hz single phase 2 hp motor, saw weight is 800 lbs. - Price is $8095.00 delivered (price includes shipping to commercial and residential addresses), ships by truck


      • Click Here To Expand This To A Full Page Version

      Wikco.Com is a national equipment dealer selling direct to the end user
      To Order: Click On The Order Form Button Below For Ordering And Payment Information
      Please Order In Writing Only Using Our Order Form.


      Order Form   Home Page/Index

      If Our Index Doesnot Appear On The Left Side Of This Page
      Then Click On The Home Button Above To See The Many Other Products We Sell

      For Sales or Technical Questions, Parts Information, Or To Check On An Order
      Please E-Mail us at: sales@wikco.com
      Please review all information on our web site
      If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


      Wikco.com Inc.

      Copyright © Wikco.Com Inc., 1997-2009 All Rights Reserved