BCS Garden Tillers/Lawn Care Machines

BCS Garden Tillers are more than simply roto-tillers. These machines are probably the highest quality roto-tillers available; in addition to tiller attachments, many different attachments are available for this lawn care system including: sickle bar mowers; lawn mowers; heavy duty mowers; snow throwers; a sweeper; and a chipper shredder. Different size and types of attachments fit the different size tractors, but with two 5 hp, a 7 hp, a 8 hp, two 9 hp, and a 14 hp tractor unit, there should be a tractor/attachment combination to do your job. Since each tractor unit can run multiple implements, these units can be very efficient and cost effective to use, replacing several pieces of stand alone equipment.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

BCS Garden Tillers And Attachments
General Features
Gardener Model 710
One Tractor Runs Several Attachments (Depends Upon Size Of Tractor)
No Belts Or Chains - All Gear Drive

The Model 712GX-5 is our economical, single speed tractor powered by a 5.5 HP Honda engine. The 712 tractor can be mounted to the 18 inch tiller attachment; the unit's compactness and large 15 inch diameter tires make it stable and easy to handle. The tiller has a slow tilling speed of .6 mph allowing the tines to rotate 20 times per revolution of the wheel. The model 712 is great for the tough jobs such as breaking new ground, tilling sod, and power composting. The finely tilled seedbeds that it produces are ready to plant with no raking required. The slower cultivating speed of the 712 makes it the best choice for people gardening in beds as opposed to mechanically cultivating between the rows (for cultivating between the rows, try our larger models with faster tine speeds). The single mowing speed of 1.4 mph si appropriate for either the 30 inch or 40 inch sickle bar mower; and also available is a 22 inch wide single blade lawn mower.

  • Features/Specifications - 712GX-5
  • No belts - BCS uses a heavy duty automotive style clutch that does not rob power like belts, delivering more power to the tiller
  • All Gear Drive - all BCS tractors use only extra heavy duty gears, shafts, and ball bearings in the transmissions
  • Powered Reverse - The Gardener has a geared reverse that will get you out of tight areas while both hands stay on the handlebars
  • Versatility - The tiller can be removed and other attachments such as a sickle bar, or regular lawn mower can be added
  • No-Time-Limit warranty on the transmission
  • Handlebar adjustment - the handlebars can move from side to side instantly, which allows you to walk to the side when cultivating
  • Engine: Available a 5.5 hp Honda engine
  • Transmission is clutch and gear type, with 1 forward, and 1 reverse speed
  • Tine rotation speed is 290 rpm, tine drive is ring and pinion gear, tiller tines rotate at .6 mph, rotating them at 20 times per revolution of the wheel
  • Has large 15 inche diameter tires
  • Tilling width is 18 inches, tilling depth is 8 inches, has reverse tiller lockout
  • Has the exclusive planar wedge, that breaks up the soil in the center of the tiller leaving no untilled strip down the middle
  • Several pto powered attachments are available, including: an 18 inch rear tine tiller; 30 inch and 40 inch sickle bar, a 22 inch lawn mower with catcher, 20 inch single stage snowblower attachement, and a 20 inch wide brushmower attachment, (a non-powered hiller/furrower attachment is also available)
  • Units are available with recoil start or electric start engines
  • Adjustable handles: instant side to side and instant up and down adjustment
  • Reverse engagement gear shift
  • Warranty: 3 years plus no time limit on transmission

  • 712 Series Tractor(Attachments are ordered separately and listed below)
  • 712 Series

  • Model 832H8185: Model 712GX-5 BCS tractor with 5.5 hp Honda engine, with 1 forward speed and 1 reverse speed - Price is $1745.00 delivered

  • Attachments For Model 712 Tractor- Price On Attachments Includes Delivery If They Are Ordered With A Tractor Unit - Otherwise They Are Plus Shipping


  • Model 92192215: 18 inch rear tine tiller, fits all 710 series tractors listed above, 18 inch tiller is the maximum available on all 710's - Price is $445.00

  • Model 92190928/92190938: 30 inch sickle bar mower, dry type - Price is $775.00

  • Model 92190929/92190938: 40 inch sickle bar mower, dry type - Price is $835.00

  • Model 92191225: 20 inch brushmower - Price is $929.00

  • Model 92191219: 22 inch lawn mower w/catcher attachment - Price is $599.00

  • Model 92191227: 20 inch single stage snow thrower - Price is $740.00

  • Model 92147860: Hiller/Furrower - Price is $89.00

  • Note: On the 20 inch brush mower attachment, you may require 5 x 10 wheels and tires for use on rough terrain.


  • Additional Accessories/Parts
  • Part No. 92248334: Pneumatic wheels 19 x 5.0 x 10 with tractor tread, sold in pairs, for use with 20 inche brush mower attachment if needed - Price is $357.00 per pair plus shipping (shipping paid if ordered with a tractor)


  • The Model 718 is built to the same exacting specifications as its predicessor the model 716 but with an improved and enhanced handlebar system that provides more vertical height settings, added anti-vibration, and improved shifting. Model 718 features two working speeds for both front and rear mount attachments; as an 18 inch tiller the 718 features both low gear for seedbed preparation, and second gear for cultivating. The tines rotate 20 times per wheel revolution in 1st gear. The tines rotate 10 times per wheel revolution in second gear, which eliminates weeds and creates a dirt mulch without over-pulverizing the soil. The 718 tractor is powered by a 6.5 hp Briggs And Stratton Industrial/Commerical Intek OHV series engine that is available with either recoil or electric start. The same attachments available on the 712 tractor are available for the 718, with the addition of a transport sulky as you move up to the larger 6.5 hp engine.


    718 And 722 BCS Tractors

    Specifications Models 718 And 722

  • Has 3 forward speeds for rear mount attachments and 2 forward speeds for front mount attachments, 2 reverse speeds for both front and rear mount attachments
  • Has a quick reverse style reverse gear engagment
  • 6 pto attachments are available

  • Model 821L5180: Model 718RH tractor, powered by 6.5 hp Honda GX series engine, 3 speeds forward and 2 speeds reverse - Price is $1940.00 delivered


  • Attachments

  • Model 92191215: 18 inch rear tine tiller attachment - Price is $445.00 plus shipping (unless ordered with a tractor, then no extra shipping for the attachment), can ship UPS

  • Model 92147860: Hiller/Furrower attachment - Price is $89.00 plus shipping (unless ordered with a tractor, then no extra shipping for the attachment), can ship UPS

  • Model 92190568/92259500: Transport sulky - Price is $259.00 plus shipping (unless ordered with a tractor, then no extra shipping for the attachment), ships by truck

  • Model 92191225: 20 inch brush mower attachment - Price is $929.00 plus shipping (unless ordered with a tractor, then no extra shipping for the attachment), ships by truck

  • Model 92191219: 22 inch lawn mower with single blade, with grass catcher - Price is $599.00 plus shipping (unless ordered with a tractor, then no extra shipping for the attachment), ships by truck

  • Model 92190928/92190963: 30 inch wide sickle bar mower attachment - Price is $775.00 plus shipping, (unless ordered with a tractor, then no extra shipping for the attachment), ships by truck

  • Model 92190929/92190938: 40 inch wide sickle bar mower attachment - Price is $835.00 plus shipping, (unless ordered with a tractor, then no extra shipping for the attachment), ships by truck

  • Model 92191227: 20 inch wide snowthrower attachment - Price is $749.00 plus shipping, (unless ordered with a tractor, then no extra shipping for the attachment), ships by truck

  • Stand Alone Engine Powered Accessories

  • Stand Alone BCS Engine Powered Chipper
  • Model 92190132: Stand alone chipper/shredder with 8 hp Honda OHV engine - Price is $2250.00 delivered, ships by truck

  • Various Available Accessories As Listed Above

  • Available Lawn Mower With Catcher In 22 and 28 Inch Wide Models
    Available Snow Blower Attachment
    Available Sickle Bar Mower Attachment

    Other BCS Accessories
    Other BCS Accessories
    Other BCS Accessories
    Other BCS Accessories
    Other BCS Accessories
    Other BCS Accessories
  • Engine Conversion Kits - Includes Parts Needed To Update And Convert Your Tiller (Does Not Include The New Engine)

  • Model 92290704: Engine conversion kit so you can us a 5.5 hp Briggs Intek (Model 205 only) - Price is $189.00 delivered

  • Model 92299003: Engine conversion kit so you can use any of these engines: 8 hp Honda GX, 9 hp Briggs Vanguard, 8.5 hp Kohler - Price is $248.00 delivered

  • Model 92299004: Engine conversion kit so you can use a 5.5 hp Honda GX engine - Price is $245.00 delivered

  • Model 92299005: Engine conversion kit so you can use a 8 hp Briggs Intek engine - Price is $296.00 delivered

  • Model 92299006: Engine conversion kit so you can use a 6.5 hp Briggs Intek engine - Price is $248.00 delivered

  • Model 92299007: Engine conversion kit so you can use a 11 hp or 13 hp Honda GX engine - Price is $248.00 delivered


  • Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling direct to the end user
    To Order: Click On The Order Form Button Below For Ordering And Payment Information
    Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com
    Please review all information on our web site
    If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved