The Coats Model 5000 Truck Tire Changer is a quality, low-cost heavy-duty Amercian Made tire changer that can accommodate tube-type or tubless tires with rim diameters from 15 inches to 38 inches. The HIT-5000 models are also designed to handle large truck tires with heavy sidewalls including run flats of this type. The standard 5000 series models can accomodate run flat tires with heavy side walls and no inner liners, as well as tires with the two piece bolt together inner liners. There is also a special model for the Hutchinson run flat tires that have the one piece press on inner liner. The model 5000 features smooth electro-hydraulic power for fault-free performance; an easy to use swing-arm houses all the hydraulic controls, with a dedicated lever for each powered function. A preset pressure bypass valve prevents any hydraulic system overload that could result in damage. The model 5000 is can be ordered to accommodate 220 volt single phase, 220 volt three phase, or 110 volt single phase power.
Accommodates rim diameters from 15 inches to 38 inches
Smooth electro-hydraulic power
Easy to use swing-arm houses all hydraulic controls, with dedicated lever for each powered function
A preset pressure bypass valve prevents hydraulic system overload
Hydraulic clamping chuck is self-centering and can accept agricultural wheels up to 38 inches
An adjustable pressure regulator ensures proper matching of chuck pressure to rim strength
Heavy tapered roller bearings support the chuck
A hydraulic motor rotates chuck in either direction via chain and sprocket drive gear
Drive system gives you smooth torque for removing all tykpes of tires
A roller-type spreader is standard equipment
Tool carriage, which incorporates three sockets for the bead-loosening disc and the tire mounting/demounting assembly
Tool carriage is conveniently located below the wheel and tire to accommodate different widths
Electrical Requirements: 220 volt single phase is 2 hp/20 amp; 220 volt three phase is 2 hp/ 10 amp; 110 volt single phase is 2 hp/30 amps
No air is needed
Min/Max Wheel Diameter: 15 inches to 38 inches
Maximum tire diameter is 76 inches
Maximum wheel width is 34 inches
Works on tube type or tubless tires
Works on heavy side wall tubless run-flat tires with bolt together inner liners, or without inner liners, (for one piece Hutchinson inner liners that require pressing on, see the HIT 5000-H2 listed at the bottom of the page)
For other run flat applications for automotive and truck tires, look in our index for these models as well: Model 9024E; APX models 80 and 90; Model HIT-9000; Model 9500; and the CHD series, especially model CHD-9041
Rotational torque is 2900 ft. lbs.
Shipping weight is 1400 lbs.
Warranty: 12 month limited warranty
Please Note: The price shown for Coats automatic rim clamp tire changers and heavy duty truck tire changers (excludes 4050A center post machine or manual machines) and electronic wheel balancers include factory setup and demonstration. High quality, and factory support is the reason we only sell the Coats brand of automatic tire changers and wheel balancers
Model 8090000: Coats HIT 5000 series truck tire changer for tube and tubeless tires, wired for 220 volt single phase applications - Price is $12,565.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii and outside the U.S. require additional shipping cost), ships by truck
Model 8090001: Coats HIT 5000 series truck tire changer for tube and tubeless tires,
wired for 220 volt three phase applications - Price is $12,565.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii and outside the U.S. require additional shipping cost), ships by truck
Model 8090002: Coats Hit 5000 series truck tire changer for tube and tubeless tires, wired for 110 volt single phase applications - Price is $12,565.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii and outside the U.S. require additional shipping cost), ships by truck
Model 7110842: Ramp to help roll tire on platform - Price is $105.00 plus $35.00 UPS shipping (shipping paid if ordered with tire changer)
Model 7110843: Jaw Extension - Price is $249.00 each plus $18.00 UPS shipping per order for up to 3 (3 required for complete set, shipping paid if ordered with tire changer)
Model 7110853: 10 x 11.25 inches bolt circle adapter for Budd Stud Piloted Wheels - Price is $249.00 plus $18.00 UPS shipping (shipping paid if ordered with a tire changer)
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446