Rim Clamp Tire Changers - Coats 5065 Series

The Coats 5065 Series Rim Clamp Tire Changers are high volume models designed to meet the demands of today's wheel service market. Dependable designs and rugged construction ensure the ability to do the job properly and to withstand repeated use. Rim clamping and bead loosening operations are precise so that even the most delicate alloy wheels are easily changed using the proper techniques.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Coats 5065 Rim Clamp Tire Changer   Exclusive X-Shaped Tabletop

Logically placed hand and foot controls provide easy operation, and the tool head can set to retain both vertical and horizontal adjustments. All models in the 5065 series rim clamp European style tire changers incorporate a superior line-of-site bead loosening system with push-button control and a two position shoe. To accommodate larger rim sizes, the 5065AX and 5065EX have an extended clamping range. The 5065A models feature air-drive power, and 5065E models have electric-drive power allowing maximum flexibility for every shop.

  • Features/Specifications


  • Features/Specifications - Coats 5065A and 5065E Tire Changers


  • Two wheel postions: 1st - loosen bead; 2nd - mount/demount


  • Handles alloy and steel wheels


  • Mount/Demount Mechanism: arm manually swings from wheel


  • Tool head offset: Manual


  • Shape Of Tabletop: X-shaped for perimeter support of the wheel


  • Wheel Clamping Method: Four clamps in tabletop actuated by one 3.75 inch fiber reinforced composite cylinder


  • Height of table from floor is 27 inches


  • Bead Loosening System: Foot control actuates 7 inch dual action fiber cylinder that handles wheels 2 inches to 17 inches wide


  • Air Drive System: (only on 5060A models) 1.5 hp air


  • Electric Drive System: (only on 5065 E models) US made - 1 hp 110V single phase - 60 cycle


  • Pressure limiter is standard


  • Storage tray on post


  • Bead Seating Reservoir: Located in the vertical tower with a 3.8 gallon capacity


  • Position Of Inflation Gauge: Permanently mounted in upper tower


  • Inflation Gauge: Easily calibrated 0 to 60 psi gauge with damage resistant Lexan faceplate


  • Air Supply Gauge (Cal OSHA): 0 to 300 psi


  • Inflation guard system available as an option on 5065 series models


  • Water filter, oiler/lubricator and storage tray is standard equipment


  • Specifications


  • Rim Diameter: 10 inches to 21 inches externally, 12 inches to 24 inches internally


  • Rim Width: 14 inches maximum


  • Tire Diameter: 50 inches maximum outside


  • Type Of Drive System: All air on 5060A models, air and electric on 5065E models


  • Required Air Source: 110 to 175 psi 5 hp air compressor with 14 to 15 SCFM at 150 psi on the 5065A models, an 110 to 175 psi 2 hp air compressor with 5 SCFM at 150 psi


  • Chassis Footprint: 35 inches wide x 44 inches deep x 75 inches high for both units


  • Shipping Weight: 585 lbs. on both models


  • PLease Note: The price shown for Coats automatic rim clamp tire changers and heavy duty truck tire changers (excludes 4050A center post machine or manual machines) and electronic wheel balancers include factory setup and demonstration. High quality, and factory support is the reason we only sell the Coats brand of automatic tire changers and wheel balancers


  • Prices


  • Model 5065AX: Rim clamp tire changer with air drive motor, pedal actuated two position bead loosener and accessory box, with extended clamps - Price is $5516.00 delivered (commercial and residential addresses), ships by truck


  • Model 5065EX: Rim clamp tire changer with electric drive motor and pedal actuated two position bead loosener, with accessory box, with extended clamps - Price is $5516.00 delivered (commercial and residential addresses), ships by truck


    • Coats 5065 Features
    Coats 5065 Tire Changer

  • Accessories:

  • Part 8183606: Bead Loosener Shoe Sock comes 2 per package, slips over the bead breaker shovel blade to protect chrome or painted wheels when breaking the beads (for RC-100, RC-200, And Automotive Models) - Price is $37.95 per package of 2 plus UPS shipping
  • Part 8182963: Plastic inserts for metal mounting head on Coats auto rim clamp models, come 12 pieces per package - Price is $30.58 plus shipping per package of 12
  • Part 8183604: Clamp Sock for wheel clamps to protect chrome, aluminum, and painted wheels from scratches, plastic, they slip over the wheel clamp, easily replacable, package of 10 - Price is $48.92 plus UPS shipping


  • UPS shipping on above accessories is $15.00 per order for up to 3 accessories total


    • Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling direct to the end user
    To Order: Click On The Order Form Button Below For Ordering And Payment Information
    Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com
    Please review all information on our web site
    If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved