The Easy Auger is a one man frame mounted earth auger designed for digging through all types of hard soil including clay, (excluding rocky soil); gives you maximum torque of 350 ft. lbs. and variable auger speed from 75 to 150 rpms. The Easy Auger is used by rental centers and contractors worldwide. A wide range of augers are available, allowing you to dig holes from 2 inches to 18 inches in diameter and by purchasing adapters and extensions, you can dig down to a maximum depth of 66 inches. A walk behind push and walk behind self-propelled model is available; optional ball type tow hitch allows you to pull the unit to the jobsite with your vehicle.
Easy Auger walk behind frame mounted hydraulic earth auger available as a push model and self-propelled model
Easy Auger is counter balanced for easy digging and less fatigue and gives you maximum 350 lbs. of torque for digging through hard soil
Unit has a 1/4 inch thick steel frame, and has a pivoting engine cradle for ease of use and proper tongue weight distribution when towing
The handle swivels to allow for drilling holes on a hill or to angle holes
The optional available tow cradle attaches to the engine cradle by inserting two pins (both the push and self-propelled models can be highway towed, self-propelled model requires one of the wheel drive pins on the machine to be removed to prevent damage to the machine while towing)
Augers are available from 2 inches to 18 inches in diameter. A variety of teeth, bits, and extensions are available to allow digging up to 66 inches deep. The augers attach quickly and easily.
Each available auger bit for the Easy Auger Power Unit comes with a 7/8 inch square hub to fit The Easy Auger, dirt teeth, and a pilot bit (point) on the end of the bit.
Optional adapters are also available to allow use of your existing auger bits. Adapters are available for the following: Stihl (1.125 inches round); General (1 inch round or 1.375 hex head); and Little Beaver brand (1.25 inch square)
Easy Auger Power Units (Do Not Come With Auger Bits - See Below For Available Bits)
Push Models
Model EA93R: Easy Auger power unit with 9 hp Robin Engine, push type (not self-propelled), engine powered hydraulic digger, has maximum digging torque of 350 lbs., and adjustable auger rpm speed from 75 to 150, forward-reverse hydraulic drive, wt. is 360 lbs. - Price is $3899.00 delivered (price includes shipping to both commercial and residential locations with normal delivery access in the U.S. 48 states)
Model EA93H: Easy Auger power unit with 9 hp Honda Engine, push type (not self-propelled), engine powered hydraulic digger, has maxium digging torque of 350 lbs., and adjustable auger rpm speed from 75 to 150, forward-reverse hydraulic drive, wt. is 360 lbs. - Price is $4240.00 delivered (price includes shipping to both commercial and residential locations with normal delivery access in the U.S. 48 states)
Self-Propelled Models
Model EA93RSPT: Easy Auger power unit with 9 hp Robin Engine, self-propelled model, engine powered hydraulic digger, has maximum digging torque of 350 lbs., and adjustable auger rpm speed from 75 to 150, forward-reverse hydraulic drive, wt. is 410 lbs. - Price is $5095.00 delivered (price includes shipping to both commercial and residential locations with normal delivery access in the U.S. 48 states)
Model EA93HSPT: Easy Auger power unit with 9 hp Honda Engine, self-propelled model, engine powered hydraulic digger, has maximum digging torque of 350 lbs., and adjustable auger rpm speed from 75 to 150, forward-reverse hydraulic drive, wt. is 410 lbs. - Price is $5449.00 delivered (price includes shipping to both commercial and residential locations with normal delivery access in the U.S. 48 states)
Accessories
Part No. 850-0011: Tow bar with 2 inch ball hitch to allow highway towing using your vehicle - Price is $229.00 plus $25.00 UPS shipping (no shipping on this item if ordered with a Easy Auger power unit however)
Available Auger Bits (From 2 Inches To 18 Inches In Diameter, Lengths are either 36 or 42 inches as indicated, Easy Auger Brand Bits have a 7/8 inch square hub standard)
36 Inch Long Augers
When ordering augers, on our order form, specify the type of pilot bit and auger cutting teeth needed on the auger. Please refer to the photo above and drawings at the bottom of this page for information.
Part No. 850-1365: Auger bit 2 inches diameter x 36 inches long with 7/8 inch square hub - Price is $265.00 plus $15.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1407: Auger bit 4 inches diameter x 36 inches long with 7/8 inch square hub - Price is $279.00 plus $17.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1410: Auger bit 6 inches diameter x 36 inches long with 7/8 inch square hub - Price is $295.00 plus $18.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1413: Auger bit 8 inches diameter x 36 inches long with 7/8 inch square hub - Price is $309.00 plus $19.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1419: Auger bit 10 inches diameter x 36 inches long with 7/8 inch square hub - Price is $326.00 plus $20.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1422: Auger bit 12 inches diameter x 36 inches long with 7/8 inch square hub - Price is $332.00 plus $22.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1428: Auger bit 16 inches diameter x 36 inches long with 7/8 inch square hub - Price is $495.00 plus $24.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
42 Inch Long Augers
Part No. 850-1366: Auger bit 2 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $269.00 plus $15.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1408: Auger bit 4 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $289.00 plus $17.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1411: Auger bit 6 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $305.00 plus $18.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1414: Auger bit 8 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $319.00 plus $19.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1420: Auger bit 10 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $338.00 plus $20.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1423: Auger bit 12 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $349.00 plus $22.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1429: Auger bit 14 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $425.00 plus $23.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Part No. 850-1432: Auger bit 18 inches in diameter x 42 inches long with 7/8 inch square hub - Price is $499.00 plus $26.00 UPS shipping (no shipping on the auger if ordered with an Easy Auger Power Unit however)
Easy Auger Non-Flighted Extensions - To be used with the brand of auger specified when using other brands of augers with The Easy Auger Power Head
Part No. 850-1127: 24 inch extension for use with Little Beaver brand auger bits that have the 1.25 inch square hub - Price is $148.00 plus $15.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-1138: 24 inch extension for use with Easy Auger brand auger bits, has a 7/8 inch square hub - Price is $189.00 plus $15.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-1324: 24 inch extension for use with General brand auger bits, has a 1 inch round hub - Price is $132.00 plus $15.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-1325: 24 inch extension for use with General brand auger bits, has a 1.37 inch hex hub - Price is $139.00 plus $15.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-3867: 12 inch extension for use with Easy Auger brand auger bits, has a 7/8 inch square hub - Price is $119.00 plus $15.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-3868: 12 inch extension for use with Little Beaver brand auger bits, has a 1.25 inch square hub - Price is $126.00 plus UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-4459: 12 inch extension for use with General brand auger bits, has a 1.37 hex hub - Price is $177.00 plus $15.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-5123: 6 inch extension for use with Easy Auger brand auger bits, has a 7/8 inch square hub - Price is $109.00 plus $14.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Part No. 850-5140: 24 inch solid shaft (for telescopic extension) - Price is $98.00 plus $14.00 UPS shipping (no UPS on this item when ordered with a Easy Auger Power Head however)
Adapters
Part No. 850-1067: Adapter for Stihl brand augers with a 1.125 inch round hub - Price is $199.00 plus $14.00 UPS shipping (no UPS shipping on this item when ordered with an Easy Auger Power Head however)
Part No. 850-1068: Adapter for General brand augers with a 1 inch round hub - Price is $105.00 plus $14.00 UPS shipping (no UPS shipping on this item when ordered with an Easy Auger Power Head however)
Part No. 850-1069: Adapter for General brand augers with a 1.375 inch hex hub - Price is $105.00 plus $14.00 UPS shipping (no UPS shipping on this item when ordered with an Easy Auger Power Head however)
Part No. 850-1070: Adapter for Little Beaver brand augers with a 1.25 inch squar hub - Price is $159.00 plus $14.00 UPS shipping (no UPS shipping on this item when ordered with an Easy Auger Power Head however)
Part No. 850-6000: Replacement drive adapter for end of hydraulic motor shaft (augers attach to, for standard Easy Auger bits with 7/8 inch square hub) - Price is $115.00 plus $14.00 UPS shipping (no UPS shipping on this item when ordered with an Easy Auger Power Head however)
Replacement Parts - Available Replacement Auger Teeth And Pilot Points - (E-mail us at: sales@wikco.com for pricing)
Auger Teeth For Easy Auger Bits On This Page
850-1140: Standard dirt tooth - Price is $3.50 each plus UPS shipping
850-1141: Hardface dirt tooth - Price is $4.65 each plus UPS shipping
850-1198: Chisel tooth - Price is $3.10 each plus UPS shipping
850-1199: Hardface chisel tooth - Price is $7.85 each plus UPS shipping
850-1201: Chisel point tooth with carbide - Price is $10.60 each plus UPS shipping
850-1356: Carbide insert tooth - Price is $17.50 each plus UPS shipping
850-1405: Carbide tipped tooth - Price is $15.75 each plus UPS shipping
Pilot Points/Screw Bits For Easy Auger Bits On This Page
850-1100: Screw bit - Price is $17.95 each plus UPS Shipping
850-1101: Screw bit carbid tipped - Price is $38.50 each plus UPS Shipping
850-1102: Carbide pilot point - Price is $82.00 each plus UPS Shipping
850-1103: Hardface screw bit - Price is $32.00 each plus UPS Shipping
850-1104: Hardfaced tungsten carbide - Price is $142.50 each plus UPS Shipping
850-1105: 3 inch diameter screw bit - Price is $31.00 each plus UPS Shipping
850-1106: Carbide tipped screw bit - Price is $61.00 each plus UPS Shipping
850-1107: Carbide pilot bit - Price is $56.00 each plus UPS Shipping
850-1108: Hardface screw bit - Price is $52.00 each plus UPS Shipping
850-1109: Harfaced with tungsten carbide - Price is $83.00 each plus UPS Shipping
850-1110: 4.5 inch diameter screw bit - Price is $56.00 each plus UPS Shipping
850-1111: Carbide tipped screw bit - Price is $80.00 each plus UPS Shipping
850-1112: Carbide pilot bit - Price is $120.00 each plus UPS Shipping
850-1113: Hardfaced screw bit - Price is $83.00 each plus UPS Shipping
850-1114: Hardfaced tooth with tungsten carbide - Price is $153.00 each plus UPS Shipping
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446