Tractor/Skid Steer Mounted Hydraulic Post Driver

The Tractor/Skid Steer Mounted Hydraulic Post Driver mounts to either the front of your tractor with the front mounting kit, or mounts on the rear of the tractor's category 1, 2, or 3 three point hitch (depending upon the model) with the rear mounting kit, or quick attach mounting on skid steer loaders with the skid steer mounting kit. Three models are available, one perfect for your application; model HD-8 (The Pounder) for fence posts less than 7 inches in diameter, has 30,000 lbs. of impact force, the model HD-10 (The Workhorse) for fence posts larger than 7 inches in diameter, has 71,500 lbs. of impact force, and the model HD-12H (The Brute) for commercial fencing operations - The Brute has 100,000 lbs. of impact force.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Workhorse Model Shown
  • Features/Specifications


  • Specifications All Models

    Model HD-8 - The Pounder

  • 30,000 lbs. impact at full stroke


  • Effective weight of spring powered hammer is 360 lbs.


  • Operating distance above ground is 53-126 inches, adjustable on all models


  • Drives steel and wood posts, and railroad ties, maximum width is 7 1/8 inches, maximum length is 10 ft.


  • Unit tilts front to back and side to side 15 degrees with either manual or hydraulic base plate


  • Hydraulic base plate and manual stabilizer pad package are both optional


  • Safety Arm Post Holder - Now Standard On New Models

  • The new Safety Arm Post Holder Attachment is now standard on all post drivers and is available to purchase to retro-fit to older models. Holds and centers the post in the post driver's main channel so you don't have to hold it in place by hand. This attachment fits on all models (HD8, HD10, and HD12).


  • The Safety Arm Attachment fits all Shaver Model Post Drivers and is easy to attach. The unit bolts to the back of the Driving Ram with 2 Bolts provided. The spring-loaded attachment holds the post in the Driving Ram securely to keep the operator away from the impact area and helps the operator drive a straighter post from start to finish.


  • The Safety Arm Attachment is very easy to operate. Just open the unit, place the post in the Driving Ram and close the Arm to secure the post. Itís that simple. The adjustable Roller Assembly allows the operator to keep the Arm at its desired tension during operation.


  • Complete units consist of post driver ordered with either manual base plate or with hydraulic base plate, and mounting kit, plus any accessories.


  • If you have mostly flat ground, then the manual base plate with handles for adjusting angle to square up post driver to ground may be what you want. If you have ground with lots of hills, then you should order the post driver with hydraulic base plate and stand.


  • The rear mount base plate mounts on your tractor's category 1 or 2 three point hitch for this model. The front mounting kit is specific to your tractor and we will need to know the make and model of tractor (front kits available for most tractors). If you ordera front mount kit, keep in mind you may have to run extra hydraulic hose to front of tractor if you don't have a front hydraulic outlet.


  • Information on mounting the units on skid loaders - please read

  • The skid steer mounting package allows you to mount the post driver to the arms on your skid steer loader. There is a mounting kit for skid steer loaders that have a plastic fluid reservoir tank, and a mounting kit for skid steer loaders with a steel reservoir tank. You can use the plastic tank kit on all skid steer loaders however as it is the best installation, and may be as easy to do as the standard with return line fitting. In all cases on skid loader applications, the standard mounting for either steel or plastic tanks will require either splicing into the hydraulic lines (probably at the oil cooler), or inserting a fitting into the line without modification, but you may have to relocate the oil cooler to give you room to insert the fitting into the hydraulic line. The initial installation of the return line fitting may require some fabrication, but by doing it this way you will be able to acquire a post driver for the least cost.


  • You might also just want to order the self-contained skid steer mounting package which has it's own hydraulic motor and reservoir so you can just plug the unit into the pressure and return line of your skid loader and power it off your system that way. This mounting kit is more expensive but is easier to install and can be used on different skid loaders. The standard installation is semi-permanent and designed for users that will use the driver on one primary skid loader.


  • These post drivers use a non-pressurized return line and YOU CANNOT PLUG THE RETURN LINE INTO YOUR PRESSURIZED AUXILLARY RETURN LINE OUTLET on the standard mounting packages. To plug into both the pressure and return line of your skid loader's auxillary outlet, you would need to purchase the Self-Contained mounting package with motor and reservoir.


  • A return line fitting must be used on the standard installation (either purchased from us or you can make your own). On tractor applications, the return line fitting normally replaces the filler cap and presses in or screws on like the OEM reservoir fill cap for an easy installation. For skid steer loaders, the fitting will usually be a T-fitting that installs between the hydraulic system oil cooler and the filter. The fitting will have screw fittings on each end to re-attach to the existing hydraulic line. The third leg of the tee will have pipe threads which when in use you will slide the return line over this leg. When you want to remove the return line, you will screw on a standard pipe cap to shut off the fitting. If the hydraulic line between the oil cooler and filter cannot be bent or moved to easily allow installation of the T-fitting, then remounting of either the oil cooler or filter may be required to give you the room needed to insert the fitting in the line. While some effort is required for this installation, this is how you can get a basic post driver at the lowest cost available.


  • Information On The Skid Steer Mounting Package For Skid Steer Loaders With Plastic Hydraulic Reservoir Tanks: The skid steer mounting package for skid steer loaders with plastic tanks consists of several different pieces. The main components are high pressure braided hoses, quick couplers, some grommets and bushings, and a flow divider. This mounting/by pass kit was recommended by New Holland for all their skid steers and was engineered for those requirements. This mounting kit is recommended for all skid steer loaders with plastic reservoir tanks to prevent tank rupture caused by the return of the hydraulic fluid into the tank when using the post driver. This installation can be used on all skid loaders including units with metal tanks. It is the preferred installation for applications where you will be using the post driver on only one particular skid loader as this is a semi-permanent installation in the hydraulic lines.


  • You may also want to use the skid steer mounting package with flow divider on all units because: on skid steer applications you will have some back pressure in the system. The non-pressurized return line of the post driver must be plumbed into the system where there is the smallest amount of pressure; many times this is between the oil cooler and filter for example. The easiest place to insert the return line however, is usually into the fill cap of the reservoir as long as this doesn't activate the low pressure light in the system. You can try doing this; you can just insert the hose and tape it in place, or make your own fitting for the cap and see if it will work. You can also order the return line fitting which for many models of skid steer loader will be a T fitting which is designed to be inserted in the hydraulic line (has screw on type ends to attach to the pre-existing lines) and the third leg of the T allows you to slide the return line onto it and clamp it. You may have to move the oil cooler mounting several inches or modify or make a new line to insert the fitting in the line, so keep this in mind. A second alternative is to use the Skid steer mounting package for plastic reservoir tanks which has a flow divider to relieve some of the system pressure and remove the surge from the return line; this will still require some installation but may be a better installation.


  • If you want the least expensive post driver set up and you have one skid loader that you will always use this driver on then this is the type of post driver you want.


  • Also available is the Self-Contained Skid Steer Mounting Packages. If you are a contractor or rental yard and need to use the driver on different skid loaders, then the preferred application is the self-contained package with its own motor and reservoir that connects to both the pressure and return lines on the auxillary outlet.


  • If you have an old skid steer or tractor with low capacity hydraulics, then the self-contained reservoir and motor set-up is also the best option for skid steer mounting.


  • Hydraulic requirements are 3-4 gpm at 1500 psi (If your system doesn't meet these requirements, see the self-contained mounting kits below)


  • Remember - a complete unit consists of the post driver with a mounting kit


  • Model HD-8: The Pounder post driver with manual base plate, wt. 410 lbs. (weight of main frame only, add approximately 135 lbs. for the stabilizer frame) - Price is $2415.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Model HD-8H: The Pounder post driver with hydraulic base plate, wt. 458 lbs. (weight of main frame only, add approximately 135 lbs. for the stabilizer frame) -Price is $3735.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Click Here For Available Cash Discounts

  • Return Line Fitting


  • The standard and least expensive way to power these post drivers is to power them off the pressure line of the tractor's auxillary hydraulic outlet; these drivers however use a non-pressurized return line and YOU CANNOT PLUG THE RETURN LINE INTO YOUR PRESSURIZED AUXILLARY RETURN LINE OUTLET on standard mounting packages. A return line fitting must be used for tractor applications or skid loaders with metal hydraulic reservoir tanks, (either the universal fitting that comes with the driver, or a custom fitting purchased from us or you can make your own if the universal won't work on tractor applications or skid loader applications with metal hydraulic reservoir tanks). On tractor applications, the return line fitting normally replaces the filler cap and presses in or screws on like the OEM reservoir fill cap.


  • A return line fitting is not available for skid loaders with plastic hydraulic reservoir tanks; for this application you must use the mounting kit that has the flow divider, and with the flow divider kit the return line fitting is not used.


  • For Tractor Applications


  • All tractor mount units come with a Universal Return Line Fitting which is a pipe which can be put into the filler opening on most tractors. If this fitting does not work on your tractor, then e-mail us with the brand and model of your tractor and we will give you the part number for any available custom made fittings. You can then order the fitting.


  • For Skid Loader Applications


  • Return line fittings are available for skid loaders that have metal hydraulic reservoir tanks only. The factory does not make return line fittings for skid loaders with plastic reservoir tanks.


  • If your skid loader has a metal hydraulic reservoir tank, order the standard skid steer mounting package which will include the mounting frame with legs and angling plate (base plate), and standard hose kit. You will also need to order the return line fitting for this application (order the return line fitting and include the make and model of our skid loader and we will send the correct fitting.


  • For skid steer loaders WITH A STEEL HYDRAULIC RESERVOIR TANK, the fitting will usually be a T-fitting that installs between the hydraulic system oil cooler and the filter. The fitting will have screw fittings on each end to re-attach to the line. The third leg of the tee will have pipe threads which when in use you will slide the return line over this leg. When you want to remove the return line, you will screw on a standard pipe cap to shut off the fitting. If the hydraulic line between the oil cooler and filter cannot be bent or moved to easily allow installation of the T-fitting, then remounting of either the oil cooler or filter may be required to give you the room needed to insert the fitting in the line.


  • For Skid Loaders With a plastic reservoir tank


  • If your skid loader has a plastic hydraulic reservoir tank, order the skid steer mounting package for loaders with plastic tanks. This kit will include the mounting frame with adjustable legs, and angling plate (base plate), and hose kit with flow divider kit and hoses which prevents strain on the tank mountings that happens when the hydraulic fluid returning to the tank on the return stroke surges and pulls on the hose, which pulls on the plasic tank which can pull it off its mounts; this kit prevents this from happening. Return line fittings are not used with this kit.
  • Model RLF: Return line fitting for tractor applications, and skid loaders that have a metal hydraulic reservoir tank, please provide us with the brand name and model of the tractor or skid loader, we will ship the correct fitting for your tractor or skid loader - Price is $59.00 plus $12.00 UPS shipping (no shipping on this item if purchased and shipped with a post driver however)


  • Mounting Packages - You also need to order one of the mounting packages


  • Model SHFM-8: Front tractor mounting package complete, comes with manual stabilizers - specify make and model of tractor - Price is $520.00 delivered (when ordered with a post driver)


  • Model SHMB-01-A: Rear tractor mounting package complete, comes with manual stabilizers - for tractors with either category 1 or 2 three point hitches - Price is $465.00 delivered (when ordered with a post driver, e-mail us for a freight quote if ordered separately)


  • SHSSM-8KIT: Skid steer loader mounting package for units with steel hydraulic reservoir tanks, comes with manual stabilizer stands - Price is $838.00 delivered (when ordered with a post driver)


  • SHSSP-8KIT: Skid steer loader mounting package for units with plastic hydraulic reservoir tanks, comes with manual stabilizer stands, mounting package for plastic tanks also comes with extra couplers, braided hoses, a flow divider, refer to information above, factory considers this necessary for units with plastic tanks, but is recommend for all units, because of flow divider and hoses prevent damage to hydrostatic drive, as explained above, as well as protecting against the hoses stressing the mounts on plastic tanks - Price is $1558.00 delivered when ordered with a post driver (add $150.00 shipping if ordered separately)


  • Skid Steer Mounting Package

  • Skid Steer Mounting Kits For Loaders That Don't Have The Required 3-4 gpm/1500 psi Hydraulic Systems
  • SHOH-100KIT: Mounting system with stabilizers/self-contained hydraulic system, includes quick tach mounting plate with manual stabilizer package, and self-contained hydraulic motor with 21 quart reservoir, wt. is 273 lbs. - Price is $3725.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Other Accessories


  • SHCB-1: Concrete breaker attachment, weighs 19 lbs., fits on end of post driver ram - Price is $149.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by UPS


  • SHSM-0011-PH: Steel T-post holder attachment, wt. is 10 lbs. - Price is $75.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by UPS


  • Safety Arm Post Holder - Now Standard On New Models

  • The new Safety Arm Post Holder Attachment is now standard on all post drivers and is available to purchase to retro-fit to older models. Holds and centers the post in the post driver's main channel so you don't have to hold it in place by hand. This attachment fits on all models (HD8, HD10, and HD12). The Safety Arm Attachment fits all Shaver Model Post Drivers and is easy to attach. The unit bolts to the back of the Driving Ram with 2 Bolts provided. The spring-loaded attachment holds the post in the Driving Ram securely to keep the operator away from the impact area and helps the operator drive a straighter post from start to finish.


  • The Safety Arm Attachment is very easy to operate. Just open the unit, place the post in the Driving Ram and close the Arm to secure the post. Itís that simple. The adjustable Roller Assembly allows the operator to keep the Arm at its desired tension during operation.

  • Model SM-0011-SAA: Safety arm attachment, purchase as a retro-fit for older HD-8's, HD-10's, or HD-12's that don't have this option - new units now come with it. - Price is $260.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by UPS


  • Model SHSB-25: Super Slide Package, allows the center mounted HD-8H to slide to one side so you can position driver when driving parallel to a pre-existing fence line when you want to replace bad posts, or if you need to position a post where you otherwise can't back the tractor up to. The Super Slide Package also allows 155 degree rotation of the post for correct positioning, SHSB-25 Super Slide Package only fits the HD-8H driver, wt. is 897 lbs. - Price is $5185.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Model HD-10 - The Workhorse Model Post Driver

  • Remember - a complete unit consists of the post driver with a mounting kit


  • Model SHHD-10: The Workhorse Post Driver, with 71,500 lbs. of force, with manual base plate, wt. is 664 lbs. (main channel only, add 135 lbs. or more depending upon mounting/stabilizer leg package used)- Price is $3729.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Model SHHD-10-H: The Workhorse Post Driver, 71,500 lbs. of force, with hydraulic base plate, wt. is 714 lbs. (main frame only)- Price is $5255.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Click Here For Available Cash Discounts

  • Return Line Fitting


  • The standard and least expensive way to power these post drivers is to power them off the pressure line of the tractor's auxillary hydraulic outlet; these drivers however use a non-pressurized return line and YOU CANNOT PLUG THE RETURN LINE INTO YOUR PRESSURIZED AUXILLARY RETURN LINE OUTLET on standard mounting packages. A return line fitting must be used for tractor applications or skid loaders with metal hydraulic reservoir tanks, (either the universal fitting that comes with the driver, or a custom fitting purchased from us or you can make your own if the universal won't work on tractor applications or skid loader applications with metal hydraulic reservoir tanks). On tractor applications, the return line fitting normally replaces the filler cap and presses in or screws on like the OEM reservoir fill cap.


  • A return line fitting is not available for skid loaders with plastic hydraulic reservoir tanks; for this application you must use the mounting kit that has the flow divider, and with the flow divider kit the return line fitting is not used.


  • For Tractor Applications


  • All tractor mount units come with a Universal Return Line Fitting which is a pipe which can be put into the filler opening on most tractors. If this fitting does not work on your tractor, then e-mail us with the brand and model of your tractor and we will give you the part number for any available custom made fittings. You can then order the fitting.


  • For Skid Loader Applications


  • Return line fittings are available for skid loaders that have metal hydraulic reservoir tanks only. The factory does not make return line fittings for skid loaders with plastic reservoir tanks.


  • If your skid loader has a metal hydraulic reservoir tank, order the standard skid steer mounting package which will include the mounting frame with legs and angling plate (base plate), and standard hose kit. You will also need to order the return line fitting for this application (order the return line fitting and include the make and model of our skid loader and we will send the correct fitting.


  • For skid steer loaders WITH A STEEL HYDRAULIC RESERVOIR TANK, the fitting will usually be a T-fitting that installs between the hydraulic system oil cooler and the filter. The fitting will have screw fittings on each end to re-attach to the line. The third leg of the tee will have pipe threads which when in use you will slide the return line over this leg. When you want to remove the return line, you will screw on a standard pipe cap to shut off the fitting. If the hydraulic line between the oil cooler and filter cannot be bent or moved to easily allow installation of the T-fitting, then remounting of either the oil cooler or filter may be required to give you the room needed to insert the fitting in the line.


  • For Skid Loaders With a plastic reservoir tank


  • If your skid loader has a plastic hydraulic reservoir tank, order the skid steer mounting package for loaders with plastic tanks. This kit will include the mounting frame with adjustable legs, and angling plate (base plate), and hose kit with flow divider kit and hoses which prevents strain on the tank mountings that happens when the hydraulic fluid returning to the tank on the return stroke surges and pulls on the hose, which pulls on the plasic tank which can pull it off its mounts; this kit prevents this from happening. Return line fittings are not used with this kit.
  • Model RLF: Return line fitting for tractor applications, and skid loaders that have a metal hydraulic reservoir tank, please provide us with the brand name and model of the tractor or skid loader, we will ship the correct fitting for your tractor or skid loader - Price is $59.00 plus $15.00 UPS shipping (no shipping on this item if purchased and shipped with a post driver however)


  • Mounting Packages - Specify Make & Model Of Your Tractor


  • SHFM-10: Front mounting package complete with manual stabilizer legs, specify make and model of your tractor - Price is $567.00 delivered (no shipping when ordered with a post driver, e-mail us for a freight quote if ordered separately)


  • SHMB-1201-A: Rear mounting package complete with manual stabilizer legs, for category 2 three point hitches - Price is $524.00 delivered (no shipping when ordered with a post driver, e-mail us for a freight quote if ordered separtely)


  • SHMB-1301-A: Rear mounting package complete with manual stabilizer legs, for category 3 three point hitches - Price is $551.00 delivered (no shipping when ordered with a post driver, e-mail us for a freight quote if ordered separately)


  • SHSSM-10KIT: Skid steer mounting package complete, for skid steer loaders with quick-tach features only, and that have a steel tank hydraulic oil reservoir - Price is $867.00 delivered (no shipping when ordered with a post driver, e-mail us for a freight quote if ordered separately)


  • SHSSP-10KIT: Skid steer mounting package complete, for skid steer loaders with quick-tach features only, and that have a plastic hydraulic oil reservoir tank, this mounting kit has a flow divider and hydraulic hoses and couplers, see information above, factory says this is required on units with plastic hydraulic reservoir tanks, but recommended for all units as explained above - Price is $1739.00 delivered


  • Skid Steer Mounting Package

  • Skid Steer Mounting Kits For Loaders That Don't Have The Required 12 gpm/1500 psi Hydraulic Systems To Run The WorkHorse Model


  • SHOH-200KIT: Mounting system with stabilizers/self-contained hydraulic system, includes quick tach mounting plate with manual stabilizer package, and self-contained hydraulic motor and reservoir, wt. is 273 lbs. - Price is $3740.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck


  • Other Accessories


  • SHCB-2: Concrete breaker attachment attaches to end of post driver ram, wt. is 25 lbs. - Price is $179.00 delivered


  • SHSM-1011-PH: Steel T-post holder attachment, attaches to post driver ram, wt. 10 lbs. - Price is $81.00 delivered


  • Model SHSB-12: Mini-Positioner for the model HD-10H, gives you hydraulic rotation of the driver, frame is solid center mounted on the tractor's 3 point hitch, (no hydraulic offset - up grade to the Super Slide Package below for that) Price is $3768.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck


  • Model SHSB-22: Super Slide Package, fits HD-10H and HD-12H only, wt. is 861 lbs., gives you hydraulic offset and rotation of driver for maximum manuverability when positioning the driver - Price is $4149.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck


  • Model SM-0011-SAA: Safety arm attachment, purchase as a retro-fit for older HD-8's, HD-10's, or HD-12's that don't have this option - new units now come with it. - Price is $260.00 delivered, ships by UPS


  • Model HD-12 - The Brute Post Driver

  • Remember - a complete unit consists of the post driver with a mounting kit


  • Model SHHD-12-H: The Brute Post Driver, 100,000 lbs. of impact force, with hydraulic base plate, wt. is 929 lbs. (main frame only, add approximately 150 lbs. for stabilizer leg frame), requires 15 gpm and 2000 psi capacity hydraulic system - $6585.00 delivered (price includes shipping to commercial and residential locations with normal delivery access in the U.S. 48 states), ships by truck


  • Click Here For Available Cash Discounts

  • Return Line Fitting


  • The standard and least expensive way to power these post drivers is to power them off the pressure line of the tractor's auxillary hydraulic outlet; these drivers however use a non-pressurized return line and YOU CANNOT PLUG THE RETURN LINE INTO YOUR PRESSURIZED AUXILLARY RETURN LINE OUTLET on standard mounting packages. A return line fitting must be used for tractor applications or skid loaders with metal hydraulic reservoir tanks, (either the universal fitting that comes with the driver, or a custom fitting purchased from us or you can make your own if the universal won't work on tractor applications or skid loader applications with metal hydraulic reservoir tanks). On tractor applications, the return line fitting normally replaces the filler cap and presses in or screws on like the OEM reservoir fill cap.


  • A return line fitting is not available for skid loaders with plastic hydraulic reservoir tanks; for this application you must use the mounting kit that has the flow divider, and with the flow divider kit the return line fitting is not used.


  • For Tractor Applications


  • All tractor mount units come with a Universal Return Line Fitting which is a pipe which can be put into the filler opening on most tractors. If this fitting does not work on your tractor, then e-mail us with the brand and model of your tractor and we will give you the part number for any available custom made fittings. You can then order the fitting.


  • For Skid Loader Applications


  • Return line fittings are available for skid loaders that have metal hydraulic reservoir tanks only. The factory does not make return line fittings for skid loaders with plastic reservoir tanks.


  • If your skid loader has a metal hydraulic reservoir tank, order the standard skid steer mounting package which will include the mounting frame with legs and angling plate (base plate), and standard hose kit. You will also need to order the return line fitting for this application (order the return line fitting and include the make and model of our skid loader and we will send the correct fitting.


  • For skid steer loaders WITH A STEEL HYDRAULIC RESERVOIR TANK, the fitting will usually be a T-fitting that installs between the hydraulic system oil cooler and the filter. The fitting will have screw fittings on each end to re-attach to the line. The third leg of the tee will have pipe threads which when in use you will slide the return line over this leg. When you want to remove the return line, you will screw on a standard pipe cap to shut off the fitting. If the hydraulic line between the oil cooler and filter cannot be bent or moved to easily allow installation of the T-fitting, then remounting of either the oil cooler or filter may be required to give you the room needed to insert the fitting in the line.


  • For Skid Loaders With a plastic reservoir tank


  • If your skid loader has a plastic hydraulic reservoir tank, order the skid steer mounting package for loaders with plastic tanks. This kit will include the mounting frame with adjustable legs, and angling plate (base plate), and hose kit with flow divider kit and hoses which prevents strain on the tank mountings that happens when the hydraulic fluid returning to the tank on the return stroke surges and pulls on the hose, which pulls on the plasic tank which can pull it off its mounts; this kit prevents this from happening. Return line fittings are not used with this kit.


  • Model RLF: Return line fitting for tractor applications, and skid loaders that have a metal hydraulic reservoir tank, please provide us with the brand name and model of the tractor or skid loader, we will ship the correct fitting for your tractor or skid loader - Price is $59.00 plus $15.00 UPS shipping (no shipping on this item if purchased and shipped with a post driver however)


  • Safety Arm Post Holder - Now Standard On New Models

  • The new Safety Arm Post Holder Attachment is now standard on all post drivers and is available to purchase to retro-fit to older models. Holds and centers the post in the post driver's main channel so you don't have to hold it in place by hand. This attachment fits on all models (HD8, HD10, and HD12). The Safety Arm Attachment fits all Shaver Model Post Drivers and is easy to attach. The unit bolts to the back of the Driving Ram with 2 Bolts provided. The spring-loaded attachment holds the post in the Driving Ram securely to keep the operator away from the impact area and helps the operator drive a straighter post from start to finish.


  • The Safety Arm Attachment is very easy to operate. Just open the unit, place the post in the Driving Ram and close the Arm to secure the post. Itís that simple. The adjustable Roller Assembly allows the operator to keep the Arm at its desired tension during operation.

  • Mounting Packages - Specify Make & Model Of Your Tractor


  • Model SHMB-1201-A: Rear mounting package with manual stabilizer legs, attaches to tractor's category 2 three point hitch - Price is $517.00 delivered (no shipping when ordered with a post driver, add $175.00 shipping if ordered separately)


  • Model SHMB-1301-A: Rear mounting package with manual stabilizer legs, attaches to tractor's category 3 three point hitch - Price is $551.00 delivered (no shipping when ordered with a post driver, add $175.00 shipping if ordered separately)


  • Model SHSSM-10KIT: Skid steer mounting package with manual stabilizer legs, for skid steer loaders that have a steel hydraulic oil reservoir tank - Price is $867.00 delivered (no shipping when ordered with a post driver, add $195.00 shipping if ordered separately)


  • Skid Steer Mounting Package

  • Model SHSSP-10KIT: Skid steer mounting package for skid steer loaders that have a plastic hydraulic oil reservoir tank, this mounting package includes hoses, couplers, flow divider valve, and fittings, factory says required for skid steer loaders with plastic hydraulic reservoir tanks, but recommended for all skid steers as explained in information above - Price is $1740.00 delivered (no shipping when ordered with a post driver)


  • Model SHOH-200KIT: Skid Steer Mounting Kits For Loaders That Don't Have The Required 15 gpm/2000 psi Hydraulic Systems To Operate the Brute Fence Post Driver, skid steer self-contained mounting package complete with stabilizers (plug in to auxilliary couplers and driver is attached). Reservoir requires 21 quarts of hydraulic fluid (not included) - Price is $3788.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck


  • Other Accessories


  • Model SHCB-3: Concrete breaker attachment, fits on end of post driver ram, wt. is 10 lbs. - Price is $239.00 delivered


  • Model SHSM-1211-PH: Steel T-post holder, fits on end of post driver ram, and used to hold steel T-posts to drive them, wt. is 10 lbs. - Price is $85.00 delivered


  • Model SHSB-22: Super Slide Package, fits HD-10H and HD-12H only, wt. is 861 lbs., gives you hydraulic offset and rotation of driver for maximum manuverability when positioning the driver - Price is $4149.00 delivered (price includes shipping to locations with normal delivery access in the U.S. 48 states; locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck


  • Model SM-0011-SAA: Safety arm attachment, purchase as a retro-fit for older HD-8's, HD-10's, or HD-12's that don't have this option - new units now come with it. - Price is $260.00 delivered


  • Please Note: Please specify the make and model of tractor when ordering the return line fitting.


  • Tractor Mounted Fencepost Driver   Can Be Skid Steer Mounted

    Available Accessories
    Super Slide Package

    Two Base Plates Available




    Click Here For Available Cash Discounts

    Click Here For Available Cash Discounts

    We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Below For Ordering And Payment Information,
    And Information On Any Cash Discounts That May Be Available
    Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com
    All information is on our web site at: www.wikco.com
    If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-2013 All Rights Reserved, A U.S. Corporation















Aerators Aerators Aerator Aerators Aerator/Scarifier Arena Grading Tool Arena Grading Tool ATV Trailers ATV Trailers Auger Bucket - Skid Steer Mount Bale Slicer Ball Field Groomer Back Hoe Benders - Roll Benders, Manual And Electric/Hydraulic Box Scraper Box Blade Box Scraper Brush Chipper Brush Grapple Brush Grapple Brush Grapple Brush Grapple Brush Grapple Brush Grapple-Fork Lift Mount Brush Mower Brush Mower Brush Mower Brush Chipper Brush Chipper Brush Chipper Brush Chipper Brush Grapple Brush Grapple Brush Mower Brush Mowers Brush Mower Brush Mulcher Camping Trailiers - Motorcycle Towable Cargo Trailers - Motorcycle Towable Cargo Trailers - Motorcycle Towable Cargo Trailer - Motorcycle Towable Cargo Trailers - Motorcycle Towable Cargo Trailers - Motorcycle Towable Crane - Tractor 3Pt. Hitch Mounted Cranes - Truck Mounted, Electric And Manual Cement Mixer Cement Mixer Skid Steer Mount Cultivators Cultivator Dethatching Rake Dirt Scoop Dirt Worker Harrow Dirt Grader Attachment Disk Harrow Ditcher Ditch Digger Ditch Digger Earth Auger Earth Auger - One Man Gas Engine Earth Auger Earth Augers Earth Auger Earth Auger Earth Auger - 12 Volt Electric Fence Post Driver Fencepost Drivers Fence Post Drivers Fence Post Drivers Fertilizer Spreaders Filtering Buckets Finish Mowers Finish Mowers - Tractor Mounted Finish Mower-Tractor Mounted Finish Mower Finish Mowers - Tractor Mounted Finish Mowers - Tractor Mounted Finish Mower Flail Mowers Flail Mowers Flail Mowers Flail Mower Flail Mower Generators - PTO Powerered Generators - Engine Powered Generator/Welder Combinations Grapple Buckets Greens Mower Harrows Harrows - Rotary Harrow For ATVs - Disk Type Harrow Rakes Harrow Lift Harrow Rake Dethatcher Hay Rake Hay Rake Hay Tedder Hay Rake Harrow Rake Hydraulic Power Packs High Wheel Mowers Insecticide Sprayer Landscape Rake Landscape Rake Landscape Rake Landscape Rake Landscape Rake Landscape Rakes Landscape Rakes Landscape Rakes Landscape Rakes Landscape Rake Landscape Rake - Powered Landscape Rake - SUV Mount Landscape Rakes Lawn Edgers Leaf Blowers Load Handler Truck Unloader Logging Equipment Log Splitters Logsplitter - Hand Type Manure Spreaders Manure Spreaders Manure Spreaders Sprayer - Mist Type Motorcycle Hitches Motorcycle Tire Changer Motorcycle Tire Changer Motorcycle Tire Changer Motorcycle Tire Changer Motorcycle Trailers Mower- Offset Cutter, Articulated Multi-deck Finish Mowers Multi-deck Finish Mowers Multi-deck Finish Mowers Mult-deck Finish Mowers Overseeders Paint Striper Paint Stripers Paint Striper Paint Stripers Paintstripers Paint Striper Park Bench Pallet Forks Quick Hitch Plows Power Hammer Power Rake And Soil Pulverizer Quick Hitch Reel Roller Lawn Striping Attachment Reel Mower Standard Type Greens Mowers Roll Benders Rotary Harrow Reel Mower Rock And Brush Grapple System Roto-Tiller Tractor Mounted Roto-Tiller Tractor Mounted Roto-Tiller Tractor Mounted Roto-Tiller Tractor Mounted Roto-Tiller Tractor Mounted Sicklebar Mowers Sickle Bar Mower Sickle Bar Mower Information Snow Blades Snow Blades Snow Plows Soil Pulverizer Sprayer Spreaders Spreaders - Drop Spreaders Soil Ripper Attachment Spreader - Sand And Salt Model 800 Spreader - ATV Mount Electric Spin Spreader Electric And PTO Spreader - Hydraulic Powered, Skid Steer Mount Sprayers Stump Grinders Stump Grinders Stump Grinders Stump Grinders Stump Grinders Stump Grinders Sweeper Sweeper Parts - Model 136 Sweeper Sweeper Sweepers Sweepers Sweepers - Walk Behind Sweeper Sweeper Tire Changer - APX 80 Rim Clamp Type Tire Changer - APX 90 Rim Clamp Type Tire Changer - Coats 4050 Tire Changer - Coats 4300 Tire Changer - Model 5040 Tire Changer - Model 9024E Tire Changer Tire Changer Tire Changer - Motorcycle Wheels Tire Changer Tire Changer Tire Changer Tire Changer Tire Changer Tire Changer - Motorcycles Tire Changer - Manual Model With Air Bead Seater Tire Changers - Lawn And Garden Wheels Tractor Blades Tractor Disk Tree Cutter Tree Puller Tree Saw Tree Spades Trenchers Trenchers Trenchers Trenchers Trimmers Walk Behind Type Trim Mowers Tractor Blade Truck Bed Mat Tractor Blade Tractor Blade Tractor Mounted Roto-Tillers Tractor Mounted Tillers Tractor Mounted Tillers Tractor Mounted Tillers Tree Clippers Trim Mowers Walk Behind Rough Cut Mower Weed Chopper Wheel Balancer Information Wheel Chock - Motorcycle Wheel Balancer - Coats 1175 Wheel Balancer - Coats 1250 Wheel Balancer - Coats XR1750 Wheel Balancer - Coats XR1800 Wheel Balancer - Coats XR1850 Wheel Balancer - Coats 1000D Wheel Balancer - Proride Diagnostic Models Wheel Balancer - Coats 6401 Wheel Balancer - Coats 6275 Wheel Balancers - Coats 775 And 875 Wheel Balancer Information Wire Winders Wood Chippers Leaf Vacuum/Wood Chipper Lawn Vacuum/Wood Chipper Wood Chippers Wood Chippers Wood Chipper/Shredders