Single Miter Horizontal Band Saws Manual And Semi-Automatic Models

Single Miter Horizontal Band Saws Are Available In A Manual And Semi-Automatic Model. The Manual model BS-20M has a manual vise and does have adjustable hydraulic descent feed, but the saw head is lifted manually when the cut is finished. The Semi-Automatic Model BS-20SA has true hydraulic down feed and return, hydraulically actuated vise, and automatic shut-off. Both models have a quick release mitering head that swivels from 0 to 60 degrees and both include a built in roller feed table.

  

• Features/Specifications - Model BS-20M



• Model BS-20M is a 13 inch x 18 inch single miter manual, horizontal band saw
• Blade is 13 ft. 6 inches long and 1 inch wide and .032 inches thick, the 1 inch saw blade makes it an extremely accurate and fast cutting saw. Replacement blades are easily available
• The saw has extremely heavy-duty cast iron guide arms and wheels
• Working height on the saw is 31 inches, and has a roller table used for supporting and guiding the materials before and after they are cut
• The heavy cast iron saw head provides rigidity and swivels 0-60 degrees
• Has manual vise control with quick release lever
• Direct gear drive helps extend saw blade life and allows the saw head to make more accurate cuts and to cut faster
• Hydraulic descent feed or pressure can be adjusted by the operator. This adjustment is important when you are cutting different types and sizes of material
• The powerful coolant pump cools the blade and assists in chip removal, recommended coolant is petroleum or synthetic based coolant mixed 1:10 (coolant to water), has a 6 gallon coolant tank
• A broken blade tension device shuts down the machine if the blade breaks
• A great machine for cutting solids - round, square, or rectangles, and tubing, angle iron and much more in angles up to 60 degrees. This saw is perfect for the small to medium fabricator or job shop that needs to cut mild steel, stainless steel, aluminum, chromoly, brass, bronze, and even plastics. Fitted with the proper blade, this machine will provide years of service at a high level of production.
• Cutting Capacity: Round is 13 inches, rectangle 13 inches x 18 inches with vise at 90 degrees; round 12 inches, rectangle 13 inches x 10 3/4 inches with vise at 45 degrees, and round is 8 1/2 inches, rectangle 13 inches x 7 1/4 inches with vise at 60 degrees
• Quick releases allow the operator to change the miter angle in seconds
• Saw has 4 operating speeds, 90, 140, 220, and 330 feet per minute
• Powered by a 3 hp motor, 220 volt three phase, 60 hz power required
• Dimensions: 81 inches wide x 70 inches long x 57 inches high
• Weight is 1800 lbs.


• Model BS-20M: Manual bandsaw with 13 inch cutting capacity - Price is $8095.00 plus $350.00 shipping, wt. is 1800 lbs.


• Features/Specifications - Model BS-20SA Semi-Automatic Mitering Bandsaw



• Semi-Automatic Mitering Horizontal Band Saw, cast iron head provides rigidity and swivels 0 to 60 degrees
• Has true hydraulic down feed and return, hydraulic vise, and automatic shut-off at the end of the cut cycle
• Quick release mitering head for speed and easy operation
• Uses a 1 inch band saw blade, .032 inches thick x 13 feet 6 inches long
• Variable speed with blade speeds of 90, 140, 220, and 330 feet per minute
• Powered by a 3 hp motor, 220 volt, 60 hz, three phase
• Saw has a powerful coolant pump with 6 gallon reservoir that cools the blade and assists in chip removal
• Blade tension device shuts off saw if saw blade breaks
• Saw includes a built in roller feed table, which includes horizontal rollers with bearings and a vertical guide roller with bearings, feed table height is 31 inches
• Sawing Capacity: 13 inch round and 13 inch x 18 inch rectangle at 90 degrees; 12 inch round and 13 inch x 10 3/4 inch rectangle at 45 degrees; 8 1/2 inch round and 13 inch x 7 1/4 inch rectangle at 60 degrees
• Dimensions: 81 inches wide x 70 inches long x 57 inches high


• Model BS-20SA: Semi-automatic bandsaw with 13 inch capacity - Price is $10,845.00 plus $350.00 shipping, wt. is 1800 lbs.



Click Here To Expand This To A Full Page Version



Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine





For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com

Wikco.com Inc.
Please review all information on our web site
If you have questions, E-Mail us at: sales@wikco.com
Or Call 520-316-0446 Or Fax us at 520-316-0446


Email Us at sales@wikco.com

Copyright © Wikco.Com Inc., 1997-2007 All Rights Reserved