High Dump Skid Steer And Wheel Loader Dump Bucket

The High Dump, Skid Steer Loader And Wheel Loader Dump Bucket is a hydraulically powered dump bucket designed to give you extra reach and maximum load capacity when loading a dump truck or high sided wagon. Normal buckets require that you clear the heal of the bucket before you can dump; this can limit the load capacity of the truck bed or wagon. If you do manage to clear the heel over the side of the box, the bucket edge then drops into the wagon when you dump it, reducing how full you can fill the box. The High-Dump Bucket increases your dump out height by 48 inches, and because the bucket pivot point is close to the edge of the bucket, you can fill wagons and trucks to their maximum levels easily.

• Features/Specifications


• Hydraulic dump bucket mounts on loader arms of skid steer loaders and tractor loaders that are quick attach compatible and direct pin type, click on the link on the bottom of the page by the prices to check the price level (price level depends upon mounting your loader requires)



• Buckets are available in widths of 60, 66, 72, 78, 84, and 96 inches wide, and available in two versions - standard volume and high volume, cubic feet capacities of each size are listed below.



• Bucket depth front to back of bucket is 44 inches



• High dump bucket gives you an extra 4 ft. of height clearance so you can fill the truck or trailer bed to maximum capacity faster and easier



• The hydraulic cylinders are located on the outside of the bucket giving these the exclusive flat bucket design which allows easier bucket cleanout, and no sacrifice in bucket capacity



• When pivoting the bucket down for dumping, the lower lip of the bucket will usually be level with the point of attachment to the loader and not extend below this point, so if you can get close enough, and lift the arms over the side of the trailer you are loading, the bucket will clear the side when dumping, usually 4 ft. higher than a loader with a standard mount bucket. Depending upon the degrees of roll back you have on the pivot of the loader arms, you can tilt the loader back enough that it will raise the lip of the bucket even higher; the cylinders are long enough to compensate for high degrees of roll back. (If you need a loader with a high degree of rollback, see the loaders here at www.wikco.com).



• Mesh on back of bucket is designed to increase visability when mounting this on a skid steer loader, so you can see into the bucket. Buckets can be made with a solid back if necessary








The total price is the base price of the bucket plus the additional amount shown in the A, B, C, or D column (plus shipping listed below). The additonal cost depends upon what mount is needed. To determine which amount applies, click on the link below and look up your tractor loader model or skid steer loader on the Mounting Chart Page.





Shipping cost is $425.00 for the Standard Volume Buckets - all sizes, and $575.00 for all sizes of High Volume Buckets, includes delivery to either commercial or business locations.





Click Here For The Mounting Chart/Price Code Key For Your Loader




Click Here To Expand This To A Full Page Version



Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine





For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com

Wikco.com Inc.
Please review all information on our web site
If you have questions, E-Mail us at: sales@wikco.com
Or Call 520-316-0446 Or Fax us at 520-316-0446


Email Us at sales@wikco.com

Copyright © Wikco.Com Inc., 1997-2007 All Rights Reserved