Hydra-Fold Wing Plow

The Hydra-Fold Wing Plow is a unique, expandable width snow plow. The Hydra-Fold mounts on most large tractor/wheel loaders with 125 hp minimum, either by direct fit brackets or Q-tach brackets. Model HF1018 has a retracted width of 10 ft. and expands out to 18 feet wide. Model HF1220 has a retracted width of 12 ft. and an expanded width of 20 ft.. You can plow in both the expanded and contracted position (you plow in either full contracted width of 10 or 12 feet, or full expanded width of 18 or 20 feet). Contraction and expansion of the plow is all done hydraulically, with no lock pins necessary.

• Features/Specifications



• Designed to mount on front end tractor and wheel loaders with 125 hp minimum, mounts with direct mount brackets specific to loader, or to loaders that are Q-tach capable


• The easiest, least expensive mounting is to mount this to your loader arms by removing your bucket and mounting the plow and quick attach plate to your tractor's loader arms. If you don't want to mount the plow on your loader arms, or don't have a loader on your large farm tractor, then you can frame mount the plow by purchasing a mounting frame that bolts to your tractor.
• If you can mount the plow on your loader arms however, there is no reason not to as the plow has a spring trip cutting edge (and the optional side plates also are spring tripped), so the plow won't adversley affect your loader arms.
• If you want to frame mount the plow, then us this heavy duty mounting frame that serves the same function as your loader arms; it mounts the plow, and using your tractor's hydraulics, allows you to raise and lower the plow. The mounting frame comes with the hydraulic cylinders built-in to the frame; you have to supply the hoses and plug it in to your tractor's hydraulics. The left photo below shows the plow and frame mounted; the photo on the right shows just the mounting frame.


• If you want to frame mount the plow on large tractors without any loader on the front you would need to purchase the frame mount option below. This heavy duty mounting frame that serves the same function as your loader arms; it mounts the plow, and using your tractor's hydraulics, allows you to raise and lower the plow. The mounting frame comes with the hydraulic cylinders built-in to the frame; you have to supply the hoses and plug it in to your tractor's hydraulics. The left photo below shows the plow and frame mounted; the photo on the right shows just the mounting frame.





• If you mount the plow on your pre-existing loader arms, your cost is just for the plow, if you purchase the optional frame mount kit. Frame mount kits are available for many tractors, e-mail or call us for availability.



If you have a large industrial/farm tractor without a loader, then order the frame mount below. You will also need to order a plow, this is just the mounting frame. If you have a loader on your tractor or have a industrial telehandler then scroll down to the plow mounting charts at the bottom of the page.




• SB4000DM: Frame mount kit for 4000 and 5000 series plows, wt. is 1020 lbs., this is the frame kit/lift arm kit only, THIS DOES NOT INCLUDE A SNOW PLOW, order plows separately - Price is $4850.00 plus $445.00 shipping



• Now three sizes available: 9 ft. expanding to 14 ft., 10 ft. expanding to 18 ft., and 12 ft. expanding to 20 ft., plowing is done with plow either fully contracted or expanded - you plow at either the minimum or maximum plow width (2 positions)
• Floating edge on endplate follows contour of surface
• Spring-trip cutting edge protects blade from unexpected obstacles
• Exclusive spring-trip endplates protect blade and property against un-seen obstacles
• 30 inch high moldboard
• 30 inch deep hydraulic end plates are optional
• Has replaceable cutting edge, adjustable skid shoes, and adjustable lateral float






  



• Hydra-Fold Angle Blades


• Model HFA914: 9 ft. or 14 ft. folding (expanding/retracting) wing snow plow, 34 inch tall moldboard, mounts to loaders 80 hp minimum - Price is $19,495.00 plus $950.00 shipping, weighs 2400 lbs., shipped by truck


• Model HFA1018: 10 ft. or 18 ft. folding (expanding/retracting) wing snow plow, 42 inch high moldboard, mounts to loaders 125 hp minimum - Price is $19,995.00 plus $950.00 shipping, weighs 3300 lbs., shipped by truck


• Model HFA1220: 12 ft. or 20 ft. folding (expanding/rectracting) wing snow plow, 42 inch high moldboard, mounts to loaders 125 hp minimum - Price is $20,450.00 plus $950.00 shipping, weighs 3800 lbs., shipped by truck


• Please Specify The Mounting Needed As Listed In The Mounting Charts Listed At The Bottom Of The Page


• New The Hydra-Fold Pusher Plow


• New - Hydra-Fold Pusher Plow is bucket edge mount standard, and comes complete with end plates


• Also available to fit undercarriage mounting, please specify mounting needed. If you want frame mounted model, then specify mounting and frame mount/lift arm model also.


• Three sizes are available - 8.5 ft. retracted / 13.5 ft. expanded; 10 ft. retracted / 18 ft. expanded, and 12 ft. retracted / 20 ft. expanded
• Minimum horsepower requirements are 80, 125, and 125 respectively


• Model HFP85135: Hydra-Fold bucket mounted push plow, comes complete with end plates, wt. is 2600 lbs., retracted width of 8.5 ft., expanded width of 13.5 ft., minimum tractor hp of 80 required - Price is $18,500.00 plus $950.00 shipping


• Model HFP1018: Hydra-Fold bucket mounted push plow, comes complete with end plates, wt, is 3600 lbs., retracted width of 10 ft., expanded width of 18 ft., minimum tractor hp of 125 required - Price is $19,000.00 plus $950.00 shipping


• Model HFP1220: Hydra-Fold bucket mounted push plow, comes complete with end plates, wt. is 3800 lbs., retracted width of 12 ft., expanded width of 20 ft., minimum tractor hp of 125 required - Price is $19,590.00 plus $950.00 shipping


• *Shipping rates on these large snow plows can vary depending upon location and availability of shipping choices to your location. You should count on the shipping charges shown. Shipping rates are our flat rate shipping rate and will be the maximum unless the delivery address is such that there are special circumstances. You will be advised in advance of any changes, with the option of changing your order. Delivery will be by standard motor freight or private carrier, whichever is available to your location.


• Accessories


  


• Manual Flip Up Spring Trip End Plates For The Hydra-Fold Angle Blade Plows - 24 Inches Deep


• Model SB4000EP: Manual flip up spring trip endplates, for angle blades with a 34 inch high moldboard (Model HFA914), wt. is 520 lbs. per set - Price is $2049.00 per set, plus shipping (no extra shipping on this item when ordered with a plow)


• Model SB5000EP: Manual flip up spring trip endplates, for angle blades with a 42 inch high moldboard (Models HFA1018 and HFA1220), wt. is 780 lbs. per set - Price is $2659.00 per set, plus shipping (no extra shipping on this item when ordered with a plow)


• Hydraulically Activated Spring Trip End Plates - 30 Inches Deep


• Model SB4000HAEP: Hydraulically activated spring trip endplates, for angle blades with a 34 inch high moldboard (Model HFA914), wt. is 880 lbs. per set - Price is $3769.00 per set plus shipping (no extra shipping on this item when ordered with a plow)


• Model SB5000HAEP: Hydraulically activated spring trip endplates, for angle blades with a 42 inch high moldboard (Models HFA1018 and HFA1220), wt. is 1100 lbs. per set - Price is $4869.00 per set plus shipping (no extra shipping on this item when ordered with a plow)


























Click Here To Expand This To A Full Page Version



Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine





For Technical Questions or Parts Information
e-mail us at sales@wikco.com, or
call the Technical Department at 520-316-0446

Wikco.com Inc.
1467 N Grant Ave., Casa Grande AZ 85222
Call Toll Free: 866-464-8893 (U.S.)
Outside The U.S.: 520-316-0446
Fax number is 520-316-0446



Email Us at sales@wikco.com

Copyright © Wikco.Com Inc., 1997-2007 All Rights Reserved