HT Series Loading Ramps

The HT Series Loading Ramps are aluminum loading ramps that are hinged - either collapsing and folding in half, or bi-panel hinged folding in half length ways. This is a new design series of our heavy duty aluminum loading ramps that are also still available. Several models are available including the new HT Series Dresser Ramp, designed for loading your fully dressed road bikes. Model 12660 is similiar to our standard dresser ramp, with the wide center ramp and the two narrower side ramps so you can balance the bike when you either ride or walk it up the ramp, except that now all panels fold in half and all are separate pieces. When you fold the ramps in half, the C-hinge allows them to all separate for easy storage, so on the Dress Ramp you would have 6 short pieces that you can easily store. You can use each section as a seperate ramp, making the model 12660 ramp system one of the most versatile available. Thirteen different HT Series Ramps are now available.

• Features/Specifications


• HT Ramp Systems are aluminum loading ramps in several configurations including the dresser three panel ramp, wide panel ramps, dual single track ramps, and bi-fold atv ramps
• These ramps are constructed from lightweight, high strength aluminum, and have several special features including: serrated cross rods for maximum vehicle traction when loading, patented locking hinge allowing the ramps to fold in half and sections to break apart for maximum storage convenience. Rubber tipped fingers help hold the ramp in place on pickup or trailer endgates, and large load capacities let you load a variety of recreational equipment.
• The special Dresser Ramp is designed for loading large fully dressed (bagged) motorcycles and has a wide main section and two side ramps for maximum stability, width is 36 inches total with center section and side sections slid together (each ramp is separate, see our standard dresser ramp on page one of our loading ramps if you want a version of this ramp that has the wings attached).
• The Dresser Ramp is 4 ramps in one; the side rails are seperate from the main section, giving you several ramps that can be used in a number of different ways. Use the 18 inch wide main section alone or with the side ramps, or use the 9 inch wide side ramps individually, or slide them together to make another 18 inch wide ramp for loading atvs or mowers
• You can also order the HT ramps in several configurations, order just the 18 inch wide main section or the side sections as seperate ramps; several models/lengths of Bi-Fold Atv ramps are also availalable.


• Model 12660: Collapsing Dresser Ramp, has 1500 lb. load capacity, measures 36 inches wide x 94 inches long and is perfect for loading big bikes into mid and full size pickups, center panel has serrated rods for vehicle traction, side ramps have mesh surface, ramp weight is 70 lbs. - Price is $487.00 delivered
• Model 12650: Collapsing Single Runner Ramp, has 1000 lb. load capacity, measures 18 inches wide x 94 inches long, perfect for loading equipment into mid and full size pickups, ramp has a mesh surface, ramp weight is 36 lbs. - Price is $249.00 each delivered
• Model 12651: Collapsing Single Runner Ramp, same as 12650 except with mesh ramp surface - Price is $289.00 each delivered
• Model 12490: Pair of collapsing single runner ramps with serrated rod surface, with 1000 lb. load capacity total (500 lbs. per ramp), ramps are 11 inches wide x 78 inches long, and are designed for loading equipment into mid size trucks, ramp weight is 19 lbs. each - Price is $239.00 per set delivered
• Model 12491: Pair of collapsing single runner ramps, same as 12490 except with mesh ramp surface - Price is $279.00 per set delivered
• Model 12980: Pair of collapsing single runner ramps, with serrated rod surface, with 1000 lb. load capacity total (500 lbs. per ramp), ramps are 11 inches wide x 89 inches long and are designed for loading equipment into full size trucks, ramp weight is 18 lbs. each - Price is $275.00 per set delivered
• Model 12981: Pair of collapsing single runner ramps, same as 12980 except with mesh ramp surface - Price is $299.00 per set delivered
• Model 12990: Pair of collapsing single runner ramps, with serrated rod surface, with 1500 lb. load capacity total (750 lbs. per ramp), ramps are 11 inches wide x 89 inches long and are designed for loading heavier equipment into full size trucks, ramp weight is 19 lbs. each - Price is $295.00 per set delivered
• Model 12991: Pair of collapsing single runner ramps, same as 12990 except with mesh ramp surface - Price is $347.00 per set delivered
• Model 12492: Single runner collapsing ramp, hinged in center, 11 inches wide x 78 inches long, maximum capacity of 500 lbs. - Price is $129.00 delivered
• Model 12992: Single runner collapsing ramp, hinged in center, 11 inches wide x 78 inches long, maximum capacity of 750 lbs. - Price is $155.00 delivered
Click Here To Expand This To A Full Page Version




If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell



Click On The Search Engine Symbol Below To Search Wikco.Com Using Our Search Engine









For Technical Questions or Parts Information
e-mail us at sales@wikco.com, or
call the Technical Department at 520-316-0446

Wikco.com Inc.
1467 N Grant Ave., Casa Grande AZ 85222
Call Toll Free: 866-464-8893 (U.S.)
Outside The U.S.: 480-635-9437
Fax number is 480-635-9437



Email Us at sales@wikco.com

Copyright © Wikco.Com Inc., 1997-2006 All Rights Reserved