Loadhandler Pickup Truck Unloader

The Loadhandler Pickup Truck Unloader is a hand operated material unloading system, that makes unloading all types of materials easy. Use the Loadhandler to unload sand, gravel, dirt, rock, clay, trash, equipment, hay bales, feed bags, furniture...virtually anything you can haul in your pickup. The Loadhandler installs in about a minute, and lets you unload your pickup in as little as 30 seconds.

  

• Features/Specifications


• Loadhandler consists of a heavy gauge poly fabric rolled onto a steel bar that runs the whole length of the tailgate


• Loadhandler fabric slides on truck bed, make sure your truck bed isn't rusty; the loadhandler won't work with spray on bed liners in general (won't work with Rhino Liners (tm) or similar spray on liners).
• If you have a rough bed surface or a spray-on bed liner as above, then order the double reversible bedmat that is available from us - this accessory will protect your bed, will let the loadhandler slide, to see this go to: Double Mat Accessory - Click Here To See The Double Mat Bed Mat


• Padded brackets and tie-down straps secure the Loadhandler to any tailgate - installs or removes in about a minute


• Loadhandler units have adjustable brackets that belt onto the tops of tailgates sit it is the width of the tailgate (left to right, or driver side to passenger side) that is important in determining which Loadhandler models will fit your truck. Bed length and cab type are not important in determining which Loadhandler to purchase.


• Full-size (fleetside) tailgate widths range from 61 to 67 inches and can accomodate either the LH2000 or LH3000 Loadhandler


• Mid-Size (fleetside) tailgate widths range from 52 to 57 inches and can accomodate the LH2000M Loadhandler


• Step-Side (non-fleetside) tailgate widths range from 44 to 52 inches and can accomodate only the LH2000M Loadhandler, this includes both full-size and mid-size step-sides (and the F150 Super Crew which has a tapered tailgate of 52 inches)


• Bumper tie down strap holds tailgate down when unloading material to prevent tailgate from inching upward


• To load, just unroll the drag sheet to cover your truck bed. To unload, lower the tailgate, insert the crank handle into the end of the roller bar, and rewind the dragsheet.


• Several models of Loadhandler are available for different applications and truck sizes. If you have a compact pickup for example, and the closest size of Loadhandler is a couple of inches too wide, you can still use it; if the sides curl up as the fabric passes the wheel well this will still work fine, you want to center the load in the bed as much as possible but depending upon your truck, you may have to shift the loadhandler to one side anyway so the crank handle will clear the side of the truck bed


• Model LH3000 Loadhandler is the most suitable for trailer and flat bed application, although modification by the user may be required



• Model LH2000: - universal full-size standard model fits all full-size pickups (except step-sides) including 1/2-ton, 3/4-ton and 1-ton, Chevy/GMC, Ford F-Series, Dodge, and Toyota T100 and Tundra. Best for 1/2 ton trucks, also recommended for light duty on 3/4 and 1 ton trucks. Exceptions - does not fit F150 Super Crew Cab (because of short box and curve of fenders, that model requires the LH2000M). Unit has 68 inch wide roller bar, drag sheet is 50 inches wide x 15 ft. long, wt. is 20 lbs., capacity is 2000 lbs. - Price is $89.00 delivered



• Model LH2000M: - universal mid-size/compact standard fits Ford Ranger, Chevy S-10 and Colorado, GMC Sonoma And Canyon, Dodge Dakota, and compacts (Isuzu, Mitsubishi, Toyota, Nissan, Mazda). Best model for all Mid-Size trucks, also best model for all step-sides (both full-size and mid-size/compact step-sides. Unit has 60 inch wide roller bar, drag sheet is 42 inches wide x 15 ft. long, wt. is 18 lbs., capacity is 2000 lbs. - Price is $89.00 delivered



• Model LH3000: - universal full-size heavy duty, fits all full-size pickups including 1/2-ton, 3/4-ton and 1-ton, Chevy/GMC, Ford F-Series, Dodge, Exceptions - Toyota T100 And Tundra require LH2000M or LH3000M, and doesnot fit step-sides. This unit is best for heavy use on all full-size trucks, especially 3/4 and 1 ton trucks. Fits all full size trucks except step-sides, F-150 Super Crew, Toyota T100 And Tundra. The LH3000 is also most suitable for trailer and flat-bed application, although modification may be required. Unit has 67 inch wide roller bar, drag sheet is 52 inches wide x 15 ft. long, wt. is 31 lbs., capacity is 3000 lbs. - Price is $149.00 delivered





Click Here To Expand This To A Full Page Version



Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine





For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com

Wikco.com Inc.
Please review all information on our web site
If you have questions, E-Mail us at: sales@wikco.com
Or Call 520-316-0446 Or Fax us at 520-316-0446


Email Us at sales@wikco.com

Copyright © Wikco.Com Inc., 1997-2007 All Rights Reserved