Walk Behind Stump Grinder

The MacKissic Walk Behind Stump Grinder can be used as shown with the cutting head in the rear for maximum visability, or you can swing the handle bars around to have a rear mount model if you want the cutting head in front of the machine. The stump cutter is lightweight (225 lbs.), compact (only 25 inches wide), and easy to maneuver. The operator presence handle stops the stump cutter head in three seconds when released. The welded frame features strong uni-body construction. The stump cutter also incorporates a rear kickstand that will keep the cutter elevated during storage and transportation while doubling as an additional cutter head guard. The features and construction of this machine create one of the most user friendly, safe, and easy to use and maintain walk behind stump grinding machines available.

Features/Specifications

Features And Specifications CPSC Series Stump Grinder

Patented Cutter Head Provides Fast, Smooth, Cutting

Stump Grinder In Use In Rear Cutting Position

Stump cutter has a 6 inch disk brake with mechanical caliper, operated from the handle bar with push button lock

Reversible handle bar for front or rear cutting - all controls remain in place

Welded uni-body construction

Protective chip guard deflects chips away from operator

Operator presence handle stops cutter head in two seconds when released for maximum operator safety

Adjustable handle bar height to match operator's height for comfort

Has 13 inch x 5 inch pneumatic tires

Compact design, only 25 inches wide and lightweight (only 225 lbs.), making it easy to push to the jobsite without turf damage

Easy access to cutter head permits quick sharpening or replacement of teeth

Long lasting bearings with grease fitting used on the cutter shaft

Patented cutter head is set 30 degrees off vertical when mounted on the shaft allows cutter to work much like a router, and it discharges chips quickly

The angle of the cutting head along with the unique 45 degree, 25 degree, and straight configuration of the cutting teeth enables you to get the same results as machines with much larger hp.

The heavy cutter head acts like a flywheel providing fast, smooth, cutting, and the unique sequence of cutting teeth allows cutting in all directions

Models are available with either a 13.5 HP Briggs And Stratton engine, 9 HP Robin engine, or a 8 hp Honda engine

Model CPSC1350ICMC: Walk behind stump grinder with 13 hp Briggs And Straton OHV I/C engine with recoil start, unit has pneumatic tires, reversible handle bar for front or rear cutting, has 6 inch disc brake with mechanical caliper, unit is 41 inches high, 25 inches wide, and 88 inches long when handlebars in rear cutting position, and 73 inches when in front cutting position, engine and machine warranty is 2 years for consumer use, with 90 day machine warranty for commercial use and 1 year engine warranty for commercial use, wt. is 305 lbs. - Price is $3349.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck

Model CPSC92RMC: Walk behind stump grinder with 9 hp Robin engine with recoil start, unit has pneumatic tires, reversible handle bar for front or rear cutting, has 6 inch disc brake with mechanical caliper, unit is 41 inches high, 25 inches wide, and 88 inches long when handlebars in rear cutting position, and 73 inches when in front cutting position, engine warranty is 3 years for both consumer and commercial use, 90 day warranty for machine for commercial use and 2 year machine warranty for consumer use, wt. is 305 lbs. - Price is $3490.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck

Model CPSC82HMC: Walk behind stump grinder with 8 hp Honda engine with recoil start, unit has pneumatic tires, reversible handle bar for front or rear cutting, has 6 inch disc brake with mechanical caliper, unit is 41 inches high, 25 inches wide, and 88 inches long when handlebars in rear cutting position, and 73 inches when in front cutting position, engine warranty is 2 years for both consumer and commercial use, 90 day warranty for machine for commercial use and 2 year machine warranty for consumer use, wt. is 305 lbs. - Price is $3899.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck

Accessories

Model 807-0001: Cutter teeth - straight style, 3 required, wt. is 0.3 lbs. - Price is $14.25 each plus shipping

Model 807-0002: Cutter teeth - 25 degree style, 3 required, wt. is 0.3 lbs. - Price is $14.25 each plus shipping

Model 807-0003: Cutter teeth - 45 degree style, 3 required, wt. is 0.3 lbs. - Price is $14.25 each plus shipping

Model 807-0159: Complete set of 9 cutter teeth, wt. is 2.7 lbs. - Price is $128.00 per set plus shipping

Add $13.00 UPS shipping per order of cutting teeth (1 tooth up to 5 sets)

We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

Click Here To Expand This To A Full Page Version

Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information,
And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell

For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446

Walk Behind Stump Grinder

Wikco.com Inc. Copyright © Wikco.Com Inc., 1997-2010 All Rights Reserved, A U.S. Corporation, Casa Grande, Arizona

Wikco.com Inc.

Copyright © Wikco.Com Inc., 1997-2010 All Rights Reserved, A U.S. Corporation, Casa Grande, Arizona