The Mclane Standard Type Engine Powered Walk Behind Reel Mowers are designed for cutting grass Bermuda type grass on your lawn or on the fairway where the cutting height is between 1/4 inch to 2 1/2 inches. Mowers are available in cutting widths of 17, 20, and 25 inches and are available in push type (17 inch model only) and self-propelled. Mowers are available with Briggs and Stratton engines as listed below. All models come with a poly grass catcher standard. Models are currently available with 7 and 10 blade reels for the best cut available in a walk-behind mower. These easy to operate and maintain reel mowers are used by both homeowners and professionals world wide.
Units have fingertip driver control of throttle and manual drive lever, deadman style reel and drive clutch lever
Easy to adjust cutting height lever
All steel ball bearings on wheels and reels
All units include large, lightweight polyethylene catcher that attaches to the frame
All models use Mclane's exclusive high angle bed knife design that controls turf build-up and is ideal for Hybrid Bermuda grass, blade penetrates into matted grass area and sets it up for smooth cutting
Cutting height range is 1/4 inch to 2 1/2 inches
All widths are self-propelled models, model 17-4.75GT-7 model is also available which is and engine powered push model
17 Inch Wide Models
Model 17-4.75GT-7: 17 inch wide cut, 7 blade reel, 4.75 HP Briggs And Stratton Engine, engine powered but push type (not self-propelled), wt. approximately 170 lbs. - Price is $779.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 17-4.75GT-10: 17 inch wide cut, 10 blade reel, 4.75 HP Briggs And Stratton Engine, engine powered but push type (not self-propelled), wt. approximately 180 lbs. - Price is $799.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 17-4.75GT-7-SP: 17 inch wide cut, 7 blade reel, 4.75 HP Briggs And Stratton Engine, self-propelled, wt. approxmately 185 lbs. - Price is $799.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 17-4.75GT-10-SP: 17 inch wide cut, 10 blade reel, 4.75 HP Briggs And Stratton Engine, self-propelled, wt. approximately 185 lbs. - Price is $815.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 20-5.50GT-7: 20 inch wide cut, 7 blade reel, 5.50 hp Briggs And Stratton Engine, with 2 quart gas tank, self-propelled, wt. approximately 185 lbs. - Price is $849.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 20-5.50GT-10: 20 inch wide cut, 10 blade reel, 5.50 hp Briggs And Stratton Engine, with 2 quart gas tank, self-propelled, wt. approximately 185 lbs. - Price is $869.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 25-8.00GT-7: 25 inch wide cut, 7 blade reel, 8 HP Briggs And Stratton Engine, self-propelled, wt. approximately 195 lbs. - Price is $1210.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 25-8.00GT-10: 25 inch wide cut, 10 blade reel, 8 HP Briggs And Stratton Engine, self-propelled, wt. approximately 195 lbs. - Price is $1240.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Backlapp (sharpening) kit for the 20 and 25 inch wide standard series mowers on this page, kit includes: a chain guard; long chain; 1/4 inch hex wrench; 8 tooth sprocket; and an adapter plate assembly with two sprockets in position, kit allows you to turn the reel backwards under engine power so you can hone (backlapp) the blades. Backlapping allows the blades to be sharpened without removing the reel from the frame. Reels are hardened so that many years of backlapping can usually be done before a reel would ever need to be replaced.
Please Note: THESE KITS ONLY FIT MCLANE REEL MOWERS MANUFACTURED AFTER 1990. Units before 1990 have the reel bearings mounted on the outside of the side plates of the frame. Models with the bearings mounted on the inside of the side plates are newer models that can be used with the kits below. Sharpening kits are not available for 1990 and earlier models.
Model 20-SA: Backlapping kit for 20 inch wide Mclane mowers, includes chain case and parts listed above, kits do not include backlapping compound (specialized backlapping compound can be used or use valve grinding compound mixed with motor oil) - Price is $89.00 delivered
Model 25-SA: Backlapping kit for 25 inch wide Mclane mowers, includes chain case and parts listed above, kits do not include backlapping compound (specialized backlapping compound can be used or use valve grinding compound mixed with motor oil) - Price is $99.00 delivered
Please allow 14 working days BEFORE SHIPMENT FOR BACKLAPPING KITS
NOW AVAILABLE - THE REEL ROLLER ACCESSORY, USE IT FOR STRIPING THE LAWN AND GETTING A MORE EVEN CUT, FITS ON ALL MCLANE 17, 20, AND 25 INCH WIDE MODELS
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446