PRX Series Walk Behind Stump Grinder
The PRX Series Walk Behind Stump Grinders are powerful and compact stump cutters designed with a special cutting head to cut faster and more efficient than units of a similiar size. The cutting wheel is formed by a patented low mass 4 section blade with 12 carbide tipped teeth that cuts fast and efficiently. Four models are available: the PRX50 with 5.5 hp engine; PRX60 with 6.5 hp engine; PRX90 with 9 hp engine; and PRX130 with 13 hp engine. All models are highly maneuverable and easy to operate. These units are designed tough and can be used by businesses and municipalities as well as individuals. These stump grinders are made in the USA and have a 2 year warranty.
To See Other Products - Click Here To Go To Our Index
- Features/Specifications
- Video No. PRXP1-3: Video (Silent) with story boards, shows operation and features of Praxis Stump Grinders, approximately 7 minutes total - Price is $7.50
- Available with a 5.5 hp, 6.5 hp, 9hp, or 13 hp Honda GX Series Engine depending upon model
- Model PRX50 stump grinder with 5.5 hp Honda engine is highly portable and well balanced and weighs just 103 lbs., it measures only 29 inches tall and with the handle folded will fit in the back of a small SUV or the trunk of a car. It will grind down a 2 ft. diameter stump up to 10 inches below ground level. The unit has a heavy duty commercial clutch and uses a 9.5 inch diameter blade for cutting. Dimensions are 22 inches wide, 50 inches long, and 42.3 inches high. - Price is $1845.00 delivered (free shipping)
- Model PRX60 stump grinder is powered by a 6.5 hp Honda GX200 series engine and also weighs approximately 103 lbs. It has the same dimensions and specifications as the model 50, except it has the larger 6.5 hp engine. - Price is $2165.00 delivered (free shipping)
- Model PRX90 stump grinder is powered by a 9.0 hp GX270 series Honda engine and allows you to grind a 3 ft. diameter stump down to 12 inches below ground. Model PRX90 weighs approximately 200 lbs. but is still much lighter than other machines for easy maneuverability. It features a heavy duty commercial clutch and also uses a 9.5 inch diameter cutting blade. Dimensions are: 26.5 inches wide; 71 inches long; 40 inches high - Price is $2845.00 delivered (free shipping)
- Model PRX130 stump grinder is similar to model PRX90 except it is powered by a 13.0 hp Honda GX390 series engine. It has the same capacity as the model 90, but with the larger engine, will grind stumps 20 percent faster (grinding time on a 3 ft. diameter Oak Stump is approximately 30 to 40 minutes) - Price is $3295.00 delivered (free shipping)
- Blades are a patented 4 section design (3 teeth on each section for 12 carbide tipped teeth total), gives you a cutting wheel that cuts through stumps faster. The aggressive stump grinding blade provides the perfect power to weight ratio and eliminates clutch and drive belt burn out. The 12 tooth tungsten carbide blade is fast, non-adjusting, and economical to replace. This blade design eliminates the expense of replacing whole blades, replace only the segments necessary. The replacement wheels can be replaced by replacing the sections with new carbide tips all installed, or by purchasing carbide tips and brazing them on yourself if you are able to do this.
- Accessories
- Replacement Blade Options:
- Model PRXBLDCPT: Complete replacement blade (4 sections) - Price is $95.00 plus $12.00 UPS
- Model PRXBLD1: Single section of blade, order the number of sections needed - Price is $24.00 per section plus $12.00 UPS per order
See all the features, specifications, and prices below. If you need additional information to order, then purchase any of the video(s) listed below for download to your computer. Click on the video order form link directly below and type in the selections you want. Videos will be e-mailed to you.
Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You
If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell
Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine
For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
Wikco.com Inc.
Please review all information on our web site
If you have questions, E-Mail us at: sales@wikco.com
Or Call 520-316-0446 Or Fax us at 520-316-0446
Email Us at sales@wikco.com
Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved