Heavy Duty Tine Rake Dethatcher - Harrow Rake

The Ranger Heavy Duty Tine Rake Dethatchers are our heaviest made models even heavier than our standard models which are virtually indestructable. Our heaviest series have dethatching tines made from 5/8 inch diameter round rod. The complete harrow assemblies are available in widths of up to 18 ft.; all harrow assembles are 6 ft. long (deep).

• Features/Specifications





• Harrow rake tine harrows are used for pasture renovation by breaking up and leveling heavy soil, can be set for light or heavy tine penetration, can be used to break up and spread manure and for dethatching of lawns


• Adjustable tine action, can set tines in vertical position for maximum penetration, set tines in angled position to the rear for light penetration, and for smoothing without any penetration, turn the harrow over


• Tines are contructed from 5/8 inch diameter mild steel and are 4 1/2 inches long


• Every 4 ft. wide x 6 ft. long section gives you 72 points, and every 6 ft. wide x 6 ft. long section gives you 104 points of contact


• The harrow is self-cleaning and low maintenance


• There are two widths of harrow sections - 4 ft. and 6 ft. wide. The harrow assembles are joined by a drawbar and can be attached to the draw bar to form a harrow assembly up to 18 ft. wide. All harrow sections are 6 ft. long.







• The standard configurations are listed below first. They use the harrow width combinations shown in the chart above to get the total width as listed. The standard 12 ft. wide harrow as priced below uses two 6 ft. wide sections. If you want to make a 12 ft. wide harrow using three 4 ft. sections as an example, then purchase the components separately for this and other combinations.



• Model LCH4: 4 ft. wide x 6 ft. long harrow complete with drawbar, wt. is 220 lbs. - Price is $614.00 delivered



• Model LCH6: 6 ft. wide x 6 ft. long harrow complete with drawbar, wt. is 302 lbs. - Price is $769.00 delivered



• Model LCH8: 8 ft. wide x 6 ft. long harrow assembly complete with drawbar, wt. is 436 lbs. - Price is $1110.00 delivered



• Model LCH10: 10 ft. wide x 6 ft. long harrow assembly complete with drawbar, wt. is 518 lbs. - Price is $1279.00 delivered



• Model LCH12: 12 ft. wide x 6 ft. long harrow assembly complete with drawbar, wt. is 626 lbs. - Price is $1489.00 delivered



• Model LCH14: 14 ft. wide x 6 ft. long harrow assembly complete with drawbar, wt. is 764 lbs. - Price is $1835.00 delivered



• Model LCH16: 16 ft. wide x 6 ft. long harrow assembly complete with drawbar, wt. is 852 lbs. - Price is $1995.00 delivered



• Model LCH18: 18 ft. wide x 6 ft. long harrow assembly complete with drawbar,(made from three 6 ft. harrows side by side), wt. is 940 lbs. - Price is $2189.00 delivered



• Optional Harrow Configurations- Order The Sections Needed - Shipping Amount Depends On Sections Ordered



• Harrow Sections Only



• Model HAHD4: 4 ft. wide x 6 ft. long chain harrow section using 5/8 inch diameter round rod, wt. is 190 lbs. - Price is $476.00 delivered



• Model HAHD6: 6 ft. wide x 6 ft. long chain harrow section using 5/8 inch diameter round rod, wt. is 260 lbs. - Price is $615.00 delivered



• Drawbars Only



• Model HADB4: 4 ft. universal drawbar, wt. is 27 lbs. - Price is $65.00 (no extra shipping when ordered with the harrow sections)



• Model HADB6: 6 ft. universal drawbar, wt. is 47 lbs. - Price is $89.00 (no extra shipping when ordered with the harrow sections)



• Model HADB8: 8 ft. universal drawbar, wt. is 64 lbs. - Price is $109.00 (no extra shipping when ordered with the harrow sections)



• Model HADB10: 10 ft. universal drawbar (total width 10 ft. 8 inches), wt. is 80 lbs. - Price is $129.00 (no extra shipping when ordered with the harrow sections)



• Model HADB12: 12 ft. universal drawbar, (total width 13 ft. 2 1/2 inches), wt. is 107 lbs. - Price is $159.00 (no extra shipping when ordered with the harrow sections)



• Model HADB14: 14 ft. universal drawbar, (total width 15 ft. 2 inches), wt. is 112 lbs. - Price is $179.00 (no extra shipping when ordered with the harrow sections)



• Model HADB16: 16 ft. universal drawbar, wt. is 117 lbs. - Price is $195.00 (no extra shipping when ordered with the harrow sections)



Click Here To Expand This To A Full Page Version



Wikco.Com is a national equipment dealer selling direct to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information
Please Order In Writing Only Using Our Order Form.


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
Please review all information on our web site
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446




Wikco.com Inc.


Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved