Three different models of Coats Premium Automatic Motorcycle Tire Changer are now available with the introduction of the new RC-150. The lowest cost premium model is the RC-100 which is designed with the features that have made it the choice of motorcycle shops for years. The top model RC-200 introduced in 2006 has all the best features to accomodate even the widest motorcycle wheels such as found on custom choppers, as well as atv and automotive wheels. The model RC-150 incorporates some of those features as well as some new ones and gives you the choice of a premium model at less cost than the model RC-200.
The Model RC-150 is designed for today's motorcycle and atv dealer
The custom engineered, 3-position motorcycle rim clamps provide extra clearance for sprockets and your choice of three optimized positions
The RC-150 can clamp rims up to 23 inches in diameter and they work just as well for smaller ATV rims down to 6 inches, so you can change tires on virtually any wheel you come across
The RC-150 has a superior bead loosening system that is optimized for motorcycle wheels by using a contoured pad and back-up system
Two positions on the bead loosening system of the RC-150 for wide chopper tires or very narrow tires to minimize the risk of wheel damage during service
The RC-150 has complete protection for delicate wheels and the RC-150 provides protection for wheels at every step of the process. Bead loosener socks, clamp booties, and lift tool protection help prevent metal to metal contact that causes scratching or marring; in addition, the tabletop of the RC-150 motorcycle tire changer is specially designed to operate at slower speeds than automotive tire changers to prevent wheel appearance damage
Model RC-150: Motorcycle rim clamp tire changer, for motorcycle and atv wheels, for wheels with rim diameters from 6 inches to 23 inches, maximum rim width 11 inches, and 14 inches with optional auto clamps, maximum tire diameter accomodated is 50 inches, has electric motor drive system on turntable, 110 volt 15 amp, single phase, 3.8 gallon air tank pressure protected, required air source for air tank, clamp pressure control system with visually adjusting wheel clamping pressure, air source required is 115-175 psi 5 SCFM at 150 psi, dimensions are 32 inches wide x 40 inches deep x 70 inches high, wt. is 425 lbs. - Price is $4448.00 delivered
Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
Click On The Search Engine Symbol Below
To Search Wikco.Com Using Our Search Engine
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
Wikco.com Inc.
Please review all information on our web site
If you have questions, E-Mail us at: sales@wikco.com
Or Call 520-316-0446 Or Fax us at 520-316-0446