Manual And Powered Slip/Plate Roll Machines

We have Manual And Powered Slip Roll And Plate Roll Machines. Units are designed for light duty work with sheet metal, up through powered models capable of rolling mild steel 5 ft. wide up to 10 gauge thick. Top roll diameter is listed on the models, minimum rolling diameter is approximately 1.5 times the roll diameter, due to spring back of the material.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Model SR-2420M Manual Slip Roll

Model SR-2420M slip roll is the perfect for anyone who needs a quality, inexpensive machine that will roll up to 24 inches wide, 20 gauge sheet metal. This machine will roll arches, cylinders, and cones out of sheet metal. This machine has 3 wire grooves that allow for rolling of wire or rod. To roll sheetmetal, simply place the unbent piece into the bender and bring the back roll up to the desired position, then start your bend. This model is easy to adjust and operate and is made with a rigid frame and is a quality hand roll.

  • Features/Specifications

  • Has a forming width of 24 inches maximum and a capacity of 20 gauge mild steel

  • Roll diameter is 3 inches, unit has three wire grooves for rolling wire or rod, wire groove sizes are .400 inches, .325 inches, and .250 inches

  • Minimum forming radius is 1 inch

  • Weight of slip roll is 165 lbs.

  • Model SR-2420M Slip Roll Machine is $720.00 delivered, ships by truck


    • Model SR-3622 Manual Slip Roll Machine

    Model SR-3622M slip roll is the perfect slip roll for anyone who needs an inexpensive high quality machine that will roll up to 36 inches wide and a maximum 22 gauge sheet metal. This machine will roll arches, cylinders and cones out of sheet metal. This machine has three wire grooves that allow for rolling of wire or rod. This machine is a light weight slip roll, great for small projects and is perfect for going between multiple job sites. For rolling sheet metal, simply place the unbent piece into the bender and bring the back roll up to the desired position and start your bend. This sheet metal bender is easy to operate and adjust making it easy to use.

  • Features/Specifications

  • Has a maximum forming width of 36 inches and maximum material thickness of 22 gauge mild steel sheet metal

  • Roll diameter is 3 inches

  • Roll has wire grooves for bending wire or solid rod with groove dimensions as follows: .447 inches, .380 inches, and .285 inches

  • Model SR-3622M Manual Slip Roll is $895.00 delivered, ships by truck


    • Powered Slip/Plate Rolls

    The Powered Slip/Plate Rolls are available in several models: SR-5016 which has a 50 inch forming width and has a capacity of 16 gauge material; PR-514 which has a 5 ft. forming width and a 14 gauge capacity; and model PR-510 which has a 5 ft. forming width and 10 gauge capacity. These are high quality machines made in Europe and designed for industrial factory use.

  • Features/Specifications

    • Model SR-5016 Power Slip Roll

  • Model SR-5016 powered slip roll has a forming width of 50 inches with a capacity of 16 gauge mild steel sheet metal
  • This is a 3 roll machine with two driven rolls that are made of polished and hardened carbon steel, offering years of service
  • Designed for use in general fabrication and HVAC shops when sheet metal forming is required
  • The drive transmission is driven by a powerful 1 hp motor, 220 single phase, 60 hz
  • Roll speed is 16 rpm
  • The frame is composed of two heavy solid steel frames that are electro-welded to a heavy base that prevents any deflection when bending across the width of the unit, even when bending at full capacity (16 gauge mild steel sheet metal)
  • Unit comes with three wire grooves
  • Rolls 16 gauge sheet metal or lighter - perfect for forming heating and ventilation stacks
  • Shipping dimensions: 67 inches L x 26 inches W x 46 inches H

  • Price is $3339.00 delivered, wt. is 660 lbs.


  • Model SR-5016M-STND: Manual version of above model SR-5016, priced with floor stand - Price is $2090.00 delivered, wt. is 600 lbs.


  • Features/Specifications


    • Model PR-514 Plate Roll

  • Initial pinch with induction hardened rolls
  • 5 ft. length with 14 gauge capacity
  • Roll speed is 6 rpms
  • 3.5 inch OD top roll
  • Motorized back roll
  • 3 wire grooves
  • Digital programmer for repeatable bends
  • Built-in coning attachment, when making a cone, material runs against a metal block to prevent metal to metal contact against the frame of the machine
  • Operator controlled by remote console and foot pedals
  • Three horsepower, 220 volt, 60 hz 3 phase motor
  • Wt. is 1350 lbs.

  • Price is $9145.00 delivered


  • Features/Specifications - Model PR-510H 10 Gauge Plate Roll

    • Model PR-510H 10 Gauge Plate Roll

  • 5 ft. length, 10 gauge capacity plate roll
  • Includes motorized back roll with digital readout
  • Bending capacity is 10 gauge mild steel 5 ft. forming width
  • Roll diameter is 5 1/2 inches and includes 3 wire grooves
  • Push button coning function on control panel, rolling cones requires option PR-CA cone attachment for prevent metal to metal contact of material and machine's frame
  • Roll speed is 8 rpms
  • Power requirements: 220 volts, 3 phase, 4.5 hp motor
  • Two rolls powered by single gearbox and gear system
  • Precision bending brake motor, conical bending device, induction hardened rolls

  • Price is $14,145.00 delivered, ships by truck


    • Model PR-403 Plate Bending Roll

    The PR-403 plate bending roll has a maxium 4 ft. forming width which can roll up to 3 gauge mild sheet steel. The machine is hydraulically driven for increased durability and reliability. All three rolls are driven on this machine allowing the machine to roll material faster. Safety features include dual emergency stop cables that are located on both the front and back of the machine. The top roll has a simple release mechanism so you can easily remove work that gets wrapped around the top roll. The plate roll offers an optional wireless remote control and an optional coning attachment for creating conical bends.


  • Features/Specifications

  • Has a mild steel capacity of 4 ft. wide and 3 gauge thick

  • Is a single pinch type plate roll

  • Top roll diameter is 6 inches

  • Hydraulic back roll, digital counter shows back roll position, operator controlled by remote console and foot pedals

  • Push button coning function on control panel, rolling cones requires option PR-CA cone attachment for prevent metal to metal contact of material and machine's frame
  • Optional coning attachment is available

  • Has a 3 hp motor, 220 volt three phase, 60 hz

  • Weight is 4180 lbs.

  • Model PR-403 Plate Roll is $15,399.00 delivered, ships by truck


    • Model PR-409 Plate Roll

    The powerful model PR-409 plate roll has a maximum 4 inch forming width, which can roll up to 9 gauge sheet mild steel. This machine is completely hydraulically driven for increased durability and reliability. All 3 rolls are driven on the PR-409 plateroll to roll more material faster. Dual emergency stop cables provide maximum operator safety. The top roll has a simple release mechanism to release work that has been wrapped around the top roll. Available options are a coning attachment for bending cones, and a wireless remote control.


  • Features/Specifications

  • Mild steel capacity is 4 ft. wide x 9 gauge

  • Single pinch machine, top roll diameter is 4 3/4 inches

  • Hydraulic powered coning assist back roll

  • 3 wire grooves

  • Digital counter shows back roll position

  • Operator controlled by remote console and foot pedals

  • Push button coning function on control panel, rolling cones requires option PR-CA cone attachment for prevent metal to metal contact of material and machine's frame

  • Optional coning attachment

  • Weight is 3740 lbs.

  • Powered by a 2 hp motor, requires 220 volt three phase power at 60 hz


  • Model PR-409 Plate Roll is $13,395.00 delivered, ships by truck


    • PR-413 Plate Roll

    Model PR-413 rolls sheet metal up to 4 ft. wide and as thick as 13 gauge mild steel, or 17 gauge if stainless steel. This is a single pinch, 3 roll machine that has a rigid cast iron frame coupled to induction hardened rolls. The unit comes standard with an operator control panel that has foot pedal controls for forward and reverse as well as digital display that shows the positioning of the back roll. The back roll is motorized and controlled by up and down buttons on the operator control panel. Model PR-413 has a trip wire E-stop around the rolling area. There is also an Emergency Stop Button on the control panel for additional safety.

  • Features/Specifications

  • Mild steel capacity is 4 ft. wide x 13 gauge, Stainless Steel capacity is 4 ft. wide x 17 gauge

  • Unit is a single pinch type roller

  • Top roller is 3.5 inches in diameter

  • Has motorized roll back

  • 3 wire grooves

  • Has built-in cone attachment (metal block on frame that material runs against when rolling cones), prevents contact between material and machine's frame

  • Digital counter shows back roll position

  • Unit weight is 1255 lbs.

  • Has 2 hp motor, requires 220 volt 3 phase, 60 hz power

  • Model PR-413 is $8075.00 delivered, ships by truck


    • PR-611 Plate Roll

    Model PR-611 plate bending roll has a maximum forming width of 6 ft. and can roll up to 11 gauge mild sheet steel. To maximize safety, the machine has an emergency stop cable that circles the entire machine. The top roll as a simple release mechanism to release work that has been wrapped around the top roll.

  • Features/Specifications

  • Has a capacity of 6 ft. wide by 11 gauge mild steel

  • Initial pinch with induction hardened rolls

  • Top roll diameter is 5 1/8 inches

  • Has hydraulic back roll

  • Has 4 wire grooves

  • Digital counter shows back roll position

  • Operator controlled by remote console and foot pedals

  • Has built-in cone attachment (metal block on frame that material runs against when rolling cones), prevents contact between material and machine's frame

  • Weight is 3355 lbs.

  • Has a 3 hp motor, requires 220 volt 3 phase, 60 hz power

  • Model PR-611 is $15,695.00 delivered, ships by truck


    • Model PR-609 Plate Roll

    The PR-609 sheet metal roll has a maximum 6 ft. forming width and material capacity up to 9 gauge mild steel. This model is completely hydraulically driven for increased durability and reliability. All 3 rolls are driven on this machine such that the machine can roll more material faster. Dual emergency stop cables are located on the front and back of the machine. Simple release of the top roll allows for easy access and removal of work that is wrapped around the top roll. An optional wireless remote control is available, as is an optional coning attachment for creating conical bends.

  • Features/Specifications

  • Capacity is 6 ft. wide x 9 gauge mild steel

  • Initial pinch with induction hardened rolls

  • Top roll diameter is 6 inches

  • Hydraulic powered coning assist

  • Digital counter shows back roll position

  • Machine is controlled by remote console and foot pedals

  • Push button coning function on control panel, rolling cones requires option PR-CA cone attachment for prevent metal to metal contact of material and machine's frame

  • Unit weight is 5610 lbs.

  • Powered by a 3 hp motor, requires 220 volt, three phase, 60 hz power

  • Model PR-609 is $19,845.00 delivered, ships by truck


  • Model PR-613 Plate Roll With Hydraulic Back Roll

    • Model PR-613 Plate Roll With Hydraulic Back Roll, 6 ft. Rolling Width, 13 Gauge Mild Steel Rolling Capacity
  • 13 gauge mild steel rolling capacity, 6 ft. wide

  • 3 hydraulically driven rolls

  • Initial pinch with induction hardened rolls, 4 3/4 Inch diameter rolls

  • Hydraulically adjusted back roll

  • Digital counter to show back roll position

  • Optional coning attachment is available

  • Operator controlled by remote console and foot pedals

  • 220 volt three phase motor

  • Price is $15,695.00 delivered, ships by truck


  • PR-603-4 Heavy Duty Plate Roll With Push Button Coning Adjustment

    • PR-603-4 Heavy Duty Plate Roll With Push Button Coning Adjustment
  • Six foot rolling width with a capacity of 3 (1/4 inch) gauge mild steel

  • Uses 4 induction hardened rolls, double pinch rolls, hydraulically driven

  • Rolling speeds from 1.5 to 6 meters per minute

  • Top roll is 7 1/2 inches in diameter

  • Has push button coning adjustment

  • 3 digital readouts for repeatable bends

  • Operator controlled via remote console

  • Push button coning function on control panel, rolling cones requires option PR-CA cone attachment for prevent metal to metal contact of material and machine's frame

  • 220 volt, three phase 60 hz motor

  • Weight is 7700 lbs.

  • Price is $39,500.00 delivered (free shipping)


    • PR-1003-4 Plate Roll With Push Button Coning Adjustment
  • 10 ft. wide rolling width

  • Uses 4 induction hardened rolls, rolls are hydraulically driven

  • Adjustable roll speed of 1.5 to 6 meters per minute

  • Rolling capacity is 1/4 inch (3 gauge) mild steel

  • Push button coning adjustment

  • Push button coning function on control panel, rolling cones requires option PR-CA cone attachment for prevent metal to metal contact of material and machine's frame

  • 2 digital readouts for repeatable bends

  • Operator controlled via remote console

  • Powered by a 220 volt three phase 60 hz motor

  • Machine weight is 15,874 lbs.

  • Price is $57,950 delivered (free shipping)


    • Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling direct to the end user
    To Order: Click On The Order Form Button Below For Ordering And Payment Information
    Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com
    Please review all information on our web site
    If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved