Sheet Metal Notcher

The Fixed Angle And Variable Angle Notchers are the highest quality and versatile sheet metal notchers on the market. These high quality notchers offer features such as their patented blade gap adjustment that allows the operator to cut different thicknesses without any adjustments needed by the operator; this allows the blades to last longer and give you a burr free cut. The Simasv notchers also shear with the blades in both the negative and positive position, have stop guides with dove tail grooves (for a tighter fit) and have the most rigid shearing head in the industry; another factor contributing to longer blade life.

Fixed Angle Sheet Metal Notcher   Variable Angle Sheet Metal Notcher
d
  • Features/Specifications


    • See all the features, specifications, and prices below. If you need additional information to order, then purchase any of the video(s) listed below for download to your computer. Click on the video order form link directly below and type in the selections you want. Videos will be e-mailed to you.

  • Video No. SMNP1-2: Video showing main features and operation of fixed and variable angle sheet metal notchers, running time is 2 min. 39 seconds - Price is $7.50



    • Features/Specifications - Fixed Angle Notcher

      • Fixed Angle Sheet Metal Notcher

    • The patented blade gap adjustment allows the operator to cut different thicknesses without any adjustments needed by the operator, allowing the blades to last longer and give you a burr free cut

    • The machines shear with the blades in the negative position as well as as the positive position. The position used is based on which part you want to keep, the finished part pulled from the machine (best is negative) or the dropped piece (best is positive). Negative cut allows for less deformation on the finished part. Negative cutting clamps the sheet metal down so there isn't any movement. Positive cutting will want to move the sheet away from the stops, allowing for room for error.

    • The stop guides have dove tail grooves in the tail that allows for a tighter, more secure guide setting allowing these machines to have more accuracy and repeatability.

    • The shearing head is the most rigid in the industry because of the 5 point fixed head. A stable shearing head is very important to blade life and machine life when notching heavier plate

    • All notchers drop the waste into a chute and the chute drops the waste in a bin outside of the machine; some other machines on the market actually have the dropped material go into a bin in the middle of the machine making the operator have to bend into the machine to take out a heavy bin of scrap to throw out, making these machines more ergonomically friendly.

    • Workbench is 25 inches x 25 inches

    • Blade length is 8 5/8 inches

    • Maximum cutting thickness is 1/4 inches in mild steel

    • Cycles per minute is 35

    • 220 volt, 3 phase motor

    • Total Machine Dimensions is 25.5 inches wide x 29.5 inches deep, 41.75 inches high, wt. is 1190 lbs.


    • Model SN-F250-MS: Fixed angle sheet metal notcher with 1/4 inch maximum cutting thickness capacity in mild steel, with a 25 inch x 25 inch work surface, wt. is 1190 lbs. - Price is $10,950.00 delivered (free shipping)


    • Model SN-F250-SS: Same as above but with hardened blades for cutting stainless steel - Price is $11,450.00 delivered (free shipping)

    • Features/Specifications - Variable Angle Notcher

      • Variable Angle Sheet Metal Notcher
    • The features of the variable angle model are similar, and in addition, the variable angle model has blades fixed in three positions with the pivot point and the end points of each blade is fixed after adjustment to angle is made. This type of rigidity separates these from other sheet metal fabricating equipment on the market

    • The variable angle machine can notch from 30 degrees up to 140 degrees and can shear a 140 degree notch in one pass with one drop (some other machines would require two cuts resulting in two drops)

    • Workbench dimensions are 37 inches x 35 inches

    • Blade length is 8 5/8 inches

    • Angle adjustment is 30 degree to 140 degrees

    • Maximum cutting thickness in mild steel is 1/4 inches

    • Cycles per minute (for the total length of the blades) is 35

    • Two adjustable squares with stop bar for proper angling of material into cutting blades

    • Machine dimensions are 35 inches wide x 37.5 inches deep x 45 inches high, wt. is 1920 lbs.

    • Model SN-V250-MS: Variable angle sheet metal notcher with 1/4 inch maximum cutting thickness capacity in mild steel, with a 35 x 37.5 work surface, wt. is 1920 lbs. - Price is $19,350.00 delivered (free shipping)

    • Model SN-V250-SS: Variable angle sheet metal notcher with 1/4 inch maximum cutting thickness capacity in mild steel, with hardened blades for cutting stainless steel, with a 35 x 27.5 work surface, wt. is 1920 lbs. - Price is $19,850.00 delivered (free shipping)


      • Click Here To Expand This To A Full Page Version

      Click On The Order Form Button Below For Ordering And Payment Information, Please Order In Writing Only Using Our Order Form.


      Order Form   Home Page/Index

      If Our Index Doesnot Appear On The Left Side Of This Page
      Then Click On The Home Button Above To See The Many Other Products We Sell

      Click On The Search Engine Symbol Below
      To Search Wikco.Com Using Our Search Engine

      Click To Search Through www.wikco.com

      For Sales or Technical Questions, Parts Information, Or To Check On An Order
      Please E-Mail us at: sales@wikco.com

      Wikco.com Inc.
      Please review all information on our web site
      If you have questions, E-Mail us at: sales@wikco.com
      Or Call 520-316-0446 Or Fax us at 520-316-0446


      Email Us at sales@wikco.com

      Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved