Sheet Metal Shears

The foot shear line consists of two models that have a capacity of 52” wide sheet metal with a cutting capacity of 16 gauge sheet metal (Mild Steel T.S. 64,000 PSI). Each stomp shear comes standard with a machined table, infeed and outfeed product supports, and side guides.

Both foot shears come standard with high carbon chromium blades and have multiple cutting surfaces so the blades can be turned for longer useful life. Spring tensioned sheet metal hold downs are standard on both models to reduce sheet lifting when shearing at full capacity. This ensures straight cuts and longer blade life.

The main difference between both stomp shear models is the construction. The SF-5216 is the heavy duty model that has been constructed completely from machined plate steel. The SF-5216E is more of an economical model that uses heavy castings. Both models are fine for most applications, but the SF-5216 has been designed with more attention to detail while the SF-5216E was designed to be economically priced.

Model SF-5216E Foot Shear

Model SF-5216 Heavy Duty Foot Shear

It is well known that Baileigh sheet metal equipment is built to a higher standard than all others; for example, all of our sheet metal cutting machinery is made of solid steel construction and not a brittle cast iron frame like most. The rigidity we design into our machinery helps eliminate deflection across the span of the four sided high carbon chromium blades and blade framework, when shearing up to 16 gauge mild steel. The SF5216 sheet metal shears blade housing is so strong that it can cut easily cut up to 20ga stainless steel as well.

SH-5216A Pneumatic Foot Shear

Model SH-5216A sheet metal air shear is the perfect complement to any fabrication or HVAC shop where 16 gauge (Mild Steel T.S. 64,000 PSI) or lighter material needs to be sheared. This powerful pneumatic shear can cut at speeds of 20 strokes per minute when high production is required. This air shears capacity is 16 gauge mild steel by up to 52” wide sheet metal.

This air shear is ruggedly built of all steel plate construction to last decades of use. The pneumatic system requires only compressed air and no electrical power to function. There are front and back material supports as well as side guides. A manual back gauge that has a hand wheel for quick adjustments is standard, and is perfect for those larger runs where repeatability is required. This air shear has a simple foot pedal control for engaging the shearing blade carriage. This well built pneumatic shear uses high chromium carbon blades for long life. These blades have multiple cutting surfaces for extended life between re-sharpening. This machine offers a great return on your investment dollars.

Model SH-5214

The electric sheet metal shears offer rigid and simple designs for decades of service. Baileigh sheet metal shearing machines come standard with high carbon chromium four sided blades that can be surface ground for maximum blade life. This machine has a metal cutting capacity of 14 gauge mild steel, and 18GA stainless steel.

All sheet metal shear machinery comes with a power requirement of 220 volt, single phase, 60 hertz. The SH-5214 electric cutting machine comes standard with the adjustable back gauge with a positive lock. This is a 52" electric hydraulic powered sheet metal shear that comes standard with table guides and front arm extensions.

Model SH-5210 Hydraulic Shear

Baileigh's hydraulic sheet metal shears are ruggedly built to withstand years of punishment cutting at full capacity across the entire useful cutting width of 52". Of the three hydraulic shears we carry the SH-5210 is the most powerful with a capacity to cut 10 gauge thick mild steel, or 14 gauge stainless steel. Besides basic metals the SH-5210 is perfect for cutting plastic, copper, or brass sheets and much more. This piece of equipment comes standard with high carbon chromium blades that can be resurfaced ground periodically saving the fabricator a lot of money over the life of the machine.

The SH-5210 sheet metal shear is built using a simple design that allows for ease of operation, that has a very rigid frame allowing this piece of fabrication equipment to shear metal at full capacity and produces no deflection in the frame or shearing areas, meaning perfect shears every time. This model uses a foot pedal control that allows this machine to shear down when the pedal is pressed and retract when the pedal is depressed. Since the machine is a 52" wide piece of equipment there is no possibility of missed shearing on a 4' x 8' sheet.

This electric sheet metal shear requires electrical power supply of 220 volts, single phase, 60 hertz, that allows this machine to fit in most small and medium fabrication shops. There body consists of a heavy cast iron frame with heavy 4 sided tool steel quality chromium blades. The adjustable back gauge has a positive lock and this machinery comes with table gauges and front arm extensions. This sheet metal shear weighs in at close to 3000 lbs meaning that there is a lot of rigidity in the frame construction that further reduces deflection throughout the cutting and shearing area.

Model SH-6014 Hydraulic Shear

The SH-6014 metal shear has a 60" useful web width and can cut down to 14 gauge mild steel easily. This machine is made of heavy electro welded steel plate allowing enough rigidity to shear at full capacity. This machine can cut through 18 gauge stainless steel.

This metal shears top and bottom shearing blades have multiple cutting edges that extends blade life. Powerful Industrial hydraulics pull the top shearing head with top blade smoothly through the material being cut increasing blade life. A hold down carriage with 9 fingers hold the sheet metal firmly against the in feed table eliminating any lifting of material as it is cut, again this improves blade life.

The SH-6014 hydraulic metal shear has a manual back gauge or stop as well as front support arms to help the operator handle the sheet metal and provide for repeatable shearing. The operator control panel is well laid out and has a switch that allows the fabricator to jog the blade, do one cycle or cut, or go into an automatic mode that is initiated by the foot pedal control.

Model SH-6010 Hydraulic Shear

The SH-6010 hydraulic shear has a 60" wide cutting capacity to accommodate most sheet metal applications. Using powerful industrial grade hydraulics and a solid electro welded metal plate construction, this machine is capable of smoothly shearing through 10 gauge mild steel and 13 gauge stainless steel. The smooth movements extend blade life.

This hydraulic shears upper carriage is heavily built to minimize any deformation and the upper and lower blades have multiple shearing edges, both extend blade life. The operator has the controls to jog the upper carriage, produce one cut with one foot pedal push, or remain in an auto mode by holding the foot pedal down. Hold downs clamp the sheet solidly to the in feed table so the material doesn't lift when being sheared.

Model SH-8014 Hydraulic Shear

Model SH-8010 Hydraulic Shear

Model SH-10010 Hydraulic Shear

Model SH-10010 Electric Hydraulic Shear 100 Inches Wide

Model SH-10010 hydraulic shear has 100 inches maximum shear length

Shear blades are high-carbon, high-chromium blades

Has 24 inch long front and back gauges and front support arms with squaring bar

Automatic and single stroke operation with jog mode, with maximum stroke rate of 22 strokes per minute

Manually Adjustable Back Gauge On Model SH-10010 Hydraulic Shear

Has manually adjustable back gauge

Has milled and polished table

Maximum shear length is 100 inches

Maximum material thickness: Mild steel is 10 gauge (0.135 inches), maximum material tensile strength 64,000 psi for mild steel; stainless steel is 13 gauge (0.090 inches), maximum material tensile strength for stainless steel is 100,000 psi at 13 gauge

Maxium work rate is 22 strokes per minute

Front and back gauge length is 24 inches

Shear angle is 2 degrees

Shipping dimensions: 125 inches long x 45 inches wide x 60 inches high, shipping weight is 6000 lbs.

Model SH-10010 hydraulic shear is $21,495.00 plus $1440.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Model SH-12014 Hydraulic Shear

Model SH-12010 Electric Hydraulic Shear 10 Ft. Wide

Model SH-12014 hydraulic shear has high-carbon, high-chromium blades, has 10 ft. (120 inches wide) maximum shear length

Has 24 inch long front and back depth gauges

Manually Adjustable Back Gauge On Model SH-12014 Hydraulic Shear

Has manually adjustable back gauge

Has milled and polished table

Maximum material thickness: 14 gauge (0.075 inches) for mild steel, maximum material tensile strength for 14 gauge mild steel is 64,000 psi; 18 gauge (0.048 inches) for stainless steel, maximum tensile strength for 18 gauge stainless steel is 100,000 psi

Maximum work speed of 20 strokes per minute

Shear angle is 2 degrees

Shipping dimensions are 150 inches long x 40 inches wide x 56 inches high, shipping weight is 5200 lbs.

Model SH-12014 hydraulic shear price is $20,895.00 plus $1280.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Model SH-12010 Hydraulic Shear

Model SH-12010 hydraulic shear has a 10 ft. (120 inches) maximum shear length

Shear uses high-carbon, high-chromium blades

Shear has 24 inch long front and back gauges, and front support arms with squaring bar

Automatic and single-stroke operation with jog mode, has maximum work speed of 20 strokes per minute

Shear capacity of: 10 gauge (.135 inch) mild steel capacity, and 13 gauge (.090 inch) stainless steel capacity

Shear angle is 2 degrees

Shipping dimensions are 145 inches long x 45 inches wide x 60 inches high, shipping weight is 6600 lbs.

Model SH-12010 hydraulic shear is $24,395.00 plus $1560.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Shears

Heavy Duty Series Hydraulic Shear Model SH-5203-HD

Hydraulic Plate Shear - The SH-5203 hydraulic plate shear has a massive electro welded frame and upper carriage that allows this 52" machine to cut 1/4" mild steel smoothly. The hefty upper blade carriage has hardened bearings on three axis that run in hardened polished and ground tracks, making it a very smooth running machine that extends blade life.

This hydraulic plate shear has a heavy in feed table with roller bearings to assist feeding the next piece of material to be cut. The blades have multiple cutting edges that extends blade life. There is an adjustable blade gap lever that can be changed in seconds when changing thickness. Independent hydraulic hold downs firmly hold the metal as it is being cut eliminating lifting and increasing the life of the machine and blade. The well laid out control panel has an adjustment for changing the blade rake that eliminates curl and twist in the cut. This hydraulic plate shear can be run in the jog mode, single cycle mode, or continuous cycling mode.

Maximum material shear length is 51.96 inches, maximum material thickness for mild steel is 0.255 inches (maximum tensile strength for mild steel is 64,000 psi), maximum material thickness for stainless steel is 0.177 inches (maximum material tensile strength for stainless steel is 100,000 psi)

Shear speed is 16-24 strokes per minute

Hold down quantity is 8, hold down pressure is 3.58 tons

Front gauge length is 39.37 inches, back gauge length is 23.62 inches (manually adjusted), the length of the cut is determined by the position of the BACK GAUGE when the metal is inserted from the front of the shears. The FRONT GAUGE controls the length of the cut when the metal sheet is inserted from the rear.

Adjustable blade rake angle from 1/2 to 2 degrees (hydraulically adjustable)

30 gallon hydraulic oil capacity

Shipping dimensions are 88.58 inches long x 53.14 inches wide x 64.96 inches high, shipping weight is 5720 lbs.

Model SH-5203-HD: Heavy duty series hydraulic sheetmetal shear, 52 (51.96 inch) shear width - Price is $26,895.00 plus $1250.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Sheetmetal Shear Model SH-5208-HD

This hydraulic shears capable of cutting 11/64" mild steel across its useful width of 52". A heavy electro welded frame made of thick plate steel coupled with a 3 axis bearing to hardened ground track system allows this machine to cut at capacity smoothly. The blades have multiple edges for longer life. The in feed table has roller bearings to assist with heavier pieces of sheet metal. There is a blade gap adjustment that changes the gap in seconds for varying thickness The blade rake can be changed in seconds to eliminate or reduce curling or twisting to the material being cut.

This hydraulic shears operation can be controlled by a well laid out operator panel with foot pedals controls. This plate shear can be run in the jog, single cycle, or continuous cycle mode. There is a manual back gauge with numerical scale.

Maximum shear length/width of machine is 51.96 inches

Maximum material thickness is 0.177 inches for mild steel (64,000 psi maximum mild steer material tensile strength), maximum material thickness for stainless steel is 0.137 inches (maximum tensile strength for stainless is 100,000 psi)

Shearing speed of 30-42 strokes per minute

Hold down quantity of 8

Maximum hold down pressure of 3.58 tons

Front gauge length is 39.37 inches, back gauge length is 23.62 inches, adjustment is manual

Hydraulic blade rake angle adjustment from 1/2 to 2 degrees

Hydraulic oil capacity is 25 gallons

Shipping dimensions are 90.55 inches long x 47.24 inches wide x 62.99 inches high, shipping weight is 4400 lbs.

Model SH-5208-HD: Heavy Duty Series hydraulic shear, 51.96 inches wide - Price is $23,495.00 plus $1050.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Sheetmetal Shear Model SH-5210-HD

The SH-5210HD hydraulic sheet metal cutting shear is a heavy duty machine built for years of production. This machine has thick steel plate frame that is electro welded and uses industrial grade hydraulics. This hydraulic sheet metal cutting shear has a very rigid carriage that rides against hardened carriage ways. Heavy duty bearings are used to reduce friction and wear. The front side of the machine has a heavy duty load table and side gauges. At the rear of the machine is a manual back gauge.

The centralized control panel offers the selection of jog, single or continuous cutting modes. There is also a dial for adjusting the rake that eliminates curl and twist in cutting. The upper blade is two sided while the lower blade is four sided. The blades can be surface ground when dulling occurs for further blade life.

Maximum shear length is 51.96 inches, maximum material thickness is 0.137 inches for mild steel with maximum material tensile strength of 64,000 psi, maximum material thickness for stainless steel is 0.86 inches with maximum tensile strength of 100,000 psi

Cutting rate is 35 to 47 strokes per minute

Front gauge length is 39.37 inches, back gauge length is 23.62 inches, adjustment is manual

Blade rake angle is hydraulically adjustable from 1/2 to 2 degrees

Shear is powered by a 7.5 hp electric motor, three phase, 220 volt, 60 hz

Hydraulic system oil capacity is 25 gallons

Shipping dimensions are 90.55 inches long x 47.24 inches wide x 62.99 inches high, shipping weight is 3960 lbs.

Model SH-5210-HD: Heavy Duty Series hydraulic sheet metal shear, 52 inches wide (51.96 inches) - Price is $20,995.00 plus $940.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Sheetmetal Shear Model SD-8010-HD

The SH-8010-HD hydraulic Sheet Metal Shear is capable of cutting a piece of 10 gauge mild steel that is 80" wide using powerful industrial grade hydraulics. Thirteen powerful hold downs clamp the material securely so there is no lift when the cut is being made, ensuring long blade life. Front support rails are scaled and the back end of the machine has a manual back gauge.

This machine is built of heavy steel plate that is electro welded together and offers the fabricator years of productive service. The shearing blades have multiple cutting edges allowing for longer blade life. The rigid cutting heads movements are trapped between 3 axis bearings that run in a polished and ground hardened track offering the smoothest running hydraulic sheet metal shear on the market.

The blade rake can be adjusted on the fly that eliminates curling and twisting when cutting. This sheet metal shear can be operated in the jog, single cycle, or continuous cycle mode when the foot pedal is pressed. This is the perfect machine for any fabrication shop.

Maximum shear length (machine width) is 81.88 inches, maximum material thickness for mild steel is 0.137 inches with maximum material tensile strength of 64,000 psi, maximum material thickness for stainless steel is 0.86 inches at maximum tensile strength of 100,000 psi

Shear speed is 32 to 44 strokes per minute

Hold down quantity is 11, maximum hold down pressure is 4.7 tons

Front gauge length is 39.37 inches, back gauge length is 23.62 inches, gauge adjustment is manual

Hydraulic blade rake angle control adjusts from 1/2 to 2 degrees

7.5 hp, three phase, 220 volt, 60 hz electric motor

Hydraulic oil capacity is 35 gallons

Shipping dimensions: 118.11 inches long x 47.24 inches wide x 64.96 inches high, shipping weight is 6600 lbs.

Model SH-8010-HD: Heavy Duty Series hydraulic sheet metal shear, 81.88 inches maximum cutting length - Price is $25,395.00 plus $1560.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Model SH-8008-HD Heavy Duty Series Hydraulic Sheet Metal Shear

The SH-8008-HD metal shear is built of heavy plate that is electro welded together making it a very smooth running machine even at full cutting capacity. This machine uses industrial grade hydraulics to power the top shearing cartridge through metal with ease. The top carriage is held in position via 3 axis bearing system that rides in a machine ground and hardened track that allows the machine to function so smoothly and it also dramatically increases blade life. For different thickness there is a blade gap adjustment.

This metal shear has blades with multiple cutting edges extending blade life. There are 12 hydraulic hold downs that securely hold the material and prevent it from lifting when shearing the sheet metal. The hold downs also extends blade life and prevent unnecessary upper carriage stress.

A dial on the control panel allows the operator to change the rake angle of the shear blade to eliminate twisting or curling of the metal. This metal shear has a function that allows the operator to jog, complete one cycle, or have the machine run continuous cycles for high production of smaller parts. Like all Baileigh metal shears, this one will offer years of productivity to any fabrication shop.

Maximum shear length is 81.88 inches, maximum material thickness for mild steel is 0.177 inches (64,000 psi tensile strength maximum), maximum material thickness for stainless steel is 0.137 inches (100,000 psi tensile strength maximum)

Shear speed is 24-36 strokes per minute

Hold down quantity is 12 sheets

Hold down pressure 6.27 tons

Front gauge length is 39.37 inches, back gauge length is 23.62 inches, gauge length adjustment is manual

Hydraulically controlled blade rake angle adjustment, from 1/2 degree to 2 degrees

Blade clearance is changed with manual adjustment lever

Hydraulic oil capacity is 35 gallons

Shipping dimensions are: 129.92 inches long x 47.24 inches wide x 64.96 inches high

Shipping weight is 7260 lbs.

Model SH-8008-HD: Heavy Duty Hydraulic Sheet Metal Shear, 82 inch shear length - Price is $27,795.00 plus $1660.00 shipping (shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii, and outside the U.S. require additional shipping cost), ships by truck. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Shear Model SH-12003-HD

The SH-12003-HD is a heavy duty hydraulic shear that is built for years of heavy cutting production requirements. The machine can cut 10 ft. wide sheet metal with a thickness up to 1/4 inch (.250 inch) thick mild steel with a tensile strength of 64,000 psi, and stainless steel up to .177 inch thick approximately 7 gauge, with a tensile strength of 100,000 psi. This heavily built sheet metal shear comes standard with an upper blade carriage that rides in a 3 axis bearing housing that runs on a heavy duty precision ground and hardened rail system for unbeatable accuracy and longevity of blade life. A rigidly constructed framework uses plate steel that is accurately electro welded in place for further stability.

The SH-12003-HD metal cutting shear includes front and rear product supports, a roller infeed table, and side guides to easily maneuver the plate steel for the next cut. There is a programmable quick change back gauge positioner that rides on a screw ball rail system for rigidity and has a positioning encoder for accuracy. Sixteen powerful hydraulic hold downs ensure the sheet of metal doesn’t lift while being sheared to the required length. An accurate shadow light stretches the entire length of the web width for proper placement of the beginning of the cut, for those one off shearing requirements.

This heavy-duty hydraulic shear comes standard with a simple to operate control panel including the rake adjustment, jog/run/stop controls, program pad for the back gauge, production counter, and much more. This metal cutting shears blade gap can be altered by a simple handle adjustment in seconds when changing material thicknesses.

The SH-12003-HD metal cutting shear uses high carbon chromium blades that have several edges, so as the blades wear they can be flipped several times before re-sharpening is required, this drastically improves blade life. A simple remote operator control pendant house an E-Stop button and foot pedal controls. This machine uses industrial grade hydraulic and electrical components to last during years of heavy production.

Specifications:

Maximum shear length: 122.04 inches

Maximum material thickness mild steel (tensile strength 64,000 psi maximum): 1/4 inch (0.250)

Maximum material thickness stainless steel (tensile strength 100,000 psi maximum): 0.177 inches (approximately 7 gauge 0.179 inches)

Stokes per minute 20 to 30

Hold down quantity is 16 sheets

Hold down pressure is 16 tons

Front gauge length is 39.37 inches

Back gauge length is 31.4 inches (manual)

Blade rake angle 1/2 to 2 degrees (hydraulic)

Blade clearance adjusted using a manual adjustment lever

Motor is 20 hp, 220 volt, 3 phase at 60 hz

Hydraulic oil capacity is 80 gallons

Shipping Dimensions: 158" long x 70 inches wide x 85 inches high

Shipping weight is: 15,400 lbs., units come crated, delivery by flatbed trailer, you will need a dock and/or forklift for unloading.

Price is $50,695.00 plus $2750.00 shipping (to locations with normal delivery access in the U.S. 48 states, Alaska, Hawaii, and other locations require additional shipping cost), (a 5 percent cash discount would apply, click on the link below), a 50 percent deposit would apply to order, lead time is 8 weeks for delivery. We cannot ship this item to locations in California.

Click Here For Available Cash Discounts

We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.

Click Here To Expand This To A Full Page Version

Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information,
And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell

For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446

Compact Series Hydraulic Sheet Metal Sheers

Click Here For Video On Sheet Metal Shears (DSL internet connections)

Click Here For Video On Sheet Metal Shears (Dial-Up internet connections)

Model SF-5216E Foot Shear

Click Here For Available Cash Discounts

Model SF-5216 Heavy Duty Foot Shear

Click Here For Available Cash Discounts

SH-5216A Pneumatic Foot Shear

Click Here For Available Cash Discounts

Model SH-5214

Click Here For Available Cash Discounts

Model SH-5210 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-6014 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-6010 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-8014 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-8010 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-10010 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-12014 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-12010 Hydraulic Shear

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Shears

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Wikco.com Inc.

Copyright © Wikco.Com Inc., 1997-2011 All Rights Reserved, A U.S. Corporation

Compact Series Hydraulic Sheet Metal Sheers

Click Here For Video On Sheet Metal Shears (DSL internet connections)

Click Here For Video On Sheet Metal Shears (Dial-Up internet connections)

Model SF-5216E Foot Shear

Click Here For Available Cash Discounts

Model SF-5216 Heavy Duty Foot Shear

Click Here For Available Cash Discounts

SH-5216A Pneumatic Foot Shear

Click Here For Available Cash Discounts

Model SH-5214

Click Here For Available Cash Discounts

Model SH-5210 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-6014 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-6010 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-8014 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-8010 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-10010 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-12014 Hydraulic Shear

Click Here For Available Cash Discounts

Model SH-12010 Hydraulic Shear

Click Here For Available Cash Discounts

Heavy Duty Series Hydraulic Shears

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Click Here For Available Cash Discounts

Wikco.com Inc. Copyright © Wikco.Com Inc., 1997-2011 All Rights Reserved, A U.S. Corporation

Wikco.com Inc.

Copyright © Wikco.Com Inc., 1997-2011 All Rights Reserved, A U.S. Corporation