Spitzlift Portable Crane

The Spitzlift Portable Crane sets up in minutes and has accessory options available to mount it to just about any truck or service vehicle. This is the world's lightest crane weighing just 30 lbs; it sets up in less than a minute. It is built of high strength structural aluminum and rotates 360 degrees. The Spitzlift does the work of 3 men with a lifting capacity of 700 lbs. The winch features a load control disk brake that automatically locks and unlocks for safe lifting and loading, preventing back injuries and workman's comp claims. The patented foldable design gives you true portability and convenient storage, stowing behind your seat. The Spitzlift is available in either a manual or AC or DC electric powered model. Two sizes are available: model LT-336 is a manual model that has a 3 ft. long boom and is great for mounting in cargo vans, it adjusts vertically from 3 ft. to 5 ft. 11 inches; the LT-436 models are available in manual or electric, and give you a 4 ft. boom length, and adjust vertically from 4 ft. to 6 ft. 11 inches tall.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

The Spitzlift Mounted On A Flat Bed Truck
  • Features/Specifications


  • The Spitzlift 3 ft crane weighs 31 lbs. and lifts 700 lbs. The boom length is 3 ft., and the crane's reach adjusts from 3 ft. to 5 ft. 11 inches above the base.
  • The Spitzlift 4 ft. crane weighs 33 lbs. and lifts 700 lbs. The boom length is 4 ft., and the crane's reach height adjusts from 4 ft. to 6 ft. 11 inches above the base.



    • The Many Uses And Mountings Of The SpitzLift   Mounted On A Flat Bed Truck

    Mounted On A 1 Ton Cargo Van

    Mounted On A Service Truck

    Mounted On A Van   Mounted On A Van

  • Winch has load control disc brake - allows one person to easily control the load

  • Pivots 360 degrees in the base, standard model lifts 700 lbs.

  • Contructed from light weight structural aluminum

  • Portable, lightweight, self-contained, stores easily

  • Comes pre-assembled

  • Unit is available in either manual model or DC powered electric hoist model

  • Various Mounting Options Are Available, So Your Total Cost Would Be The Cost Of The Crane Plus The Mounting Kit That You Want


    • Click Here For A PDF File Showing The Many Uses Of The Spitzlift Crane

  • Cranes

  • Model LT-336: Manual powered Spitzlift crane, 3 ft. boom length, adjustable height from 3 ft. to 5 ft. 11 inches, wt. is 31 lbs., uses nylon strap on hoist - Price is $399.95 delivered


  • Model LT-436: Manual powered Spitzlift crane, 4 ft. boom length, adjustable height from 4 ft. to 6 ft. 11 inches, wt. is 36 lbs., uses nylon strap on hoist - Price is $409.95 delivered


  • Model LTC-436: Manual powered Spitzlift crane, 4 ft. boom length, adjustable height from 4 ft. to 6 ft. 11 inches, wt. is 39 lbs., uses metal cable on hoist - Price is $559.00 delivered


  • Model LTEA-436: Electric AC powered Spitzlift crane, 4 ft. boom length, adjustable height from 4 ft. to 6 ft. 11 inches, wt. is 45 lbs., uses nylon strap on hoist - Price is $950.00 delivered


  • Model LTED-436: Electric DC powered Spitzlift crane, 4 ft. boom length, adjustable height from 4 ft. to 6 ft. 11 inches, wt. is 39 lbs., uses nylon strap on hoist - Price is $950.00 delivered


  • Model LTCEA-400: Electric AC powered Spitzlift crane, 4 ft. boom length, adjustable height from 4 ft. to 6 ft. 11 inches, wt. is 46 lbs., uses cable on hoist - Price is $950.00 delivered


  • Model LTCED-400: Electric DC powered Spitzlift crane, 4 ft. boom length, adjustable height from 4 ft. to 6 ft. 11 inches, wt. is 46 lbs., uses cable on hoist - Price is $950.00 delivered


  • Available Mounting Kits - Choice Of 1 Required For Use

    • Truck Receiver Hitch Kit - Offsetts 36.5 Inches
  • Model KTUR-364: Truck receiver hitch mount kit, fits all standard 2 inch hitches on trucks, vans, RVs, and jeeps, it is offset 36.5 to the left - Price is $389.95 delivered


    • Van/SUV Receiver Hitch Kit - Offsetts 22.5 Inches
  • Model KSVR-224: Van/SUV receiver hitch mount kit, fits all standard 2 inch hitches, and is designed for mounting on vans and SUVs, hitch offsetts 22.5 inches to the left - Price is $338.00 delivered


    • Universal Truck Bed Mounting Holster
  • Model PUHB-001: Universal Base mounting kit, can be installed in most pickups in about 20 minutes and the universal holster base adjusts vertically to fit most trucks and trailers and works well when mounted in a pickup bed and braced in the corner of the box. It extends no further out than the wheel well, allowing you to still haul at full capacity, (Please Note: Maximum crane lift capacity is 700 lbs. The maximum recommended lift weight when using this mounting is between 350 and 500 lbs.. depending upon the truck box and the mounting). The unit bolts to the bed with 4 bolts and to the top rail of the box with 3 bolts. Older standard pickups with heavier sides on the boxes, and modern dually pickups will support crane loads of 500 lbs. using this mounting. Newer standard pickups (C-1500s, F-150s, D1500s for example) may not support the full 500 lbs. especially if you are lifting the load from the side. Positioning the crane directly out the back will also reduce chance of box flex. Weigh of the mount is 9 lbs. - Price is $139.95 delivered


    • Suface Plate Mount Kit - 12 Inches x 12 Inches In Size
  • Model KBP-012: Surface plate mount kit, small size - 12 inches x 12 inches in size can be bolted to pickup and trailer beds or any surface, wt. is 47 lbs. - Price is $248.00 delivered


    • Suface Plate Mount Kit - 15 inches x 15 inches In Size
  • Model KBP-015: Surface plate mount kit, large size - 15 inches x 15 inches in size can be bolted to pickup and trailer beds or any surface, wt. is 64.5 lbs. - Price is $268.00 delivered


    • Right Outside Corner Mount For Truck Utility Beds
  • Model KOCM-001: Right outside corner mount kit for truck utility beds, wt. is 15 lbs. - Price is $142.00 delivered


    • Left Outside Corner Mount For Truck Utility Beds
    Left Out Side Corner Mount Kit Mounting And Electric Model Lift On Utility Truck Bed
  • Model KOCM-002: Left outside corner mount kit for truck utility beds, wt. is 15 lbs. - Price is $142.00 delivered


  • Model KICM-001: Inside corner mount kit for truck utility beds, wt. is 15 lbs. - Price is $142.00 delivered


    • Bolt-On Weld-On Kit
  • Model KBOU-022: Bolt-on, weld-on kit, includes upright support and bolt-on, weld-on base plate, use this kit to mount on trucks, flat bed trailers, vans, most applications - Price is $142.00 delivered


    • Roof Wall Mount kit - Parapet   Using The Roof Wall Mount On The Side Of A Building
    Wall Mount Kit   Wall Mount Kit Is Width Adjustable
  • Model RPP-001: Roof Wall Mount kit, width of mounting frame is adjustable, only to be used on concrete reinforced tilt-up walls - Price is $638.00 delivered


  • Other Accessories

  • Model PCC-301: Soft carrying case for the Spitzlift 3 ft. models - Price is $49.95 plus $9.85 UPS shipping, wt. is 2 lbs., (no extra shipping on this item when ordered with a lift however)


  • Model PCC-401: Soft carrying case for the Spitzlift 4 ft. models - Price is $49.95 plus $9.85 UPS shipping, wt. is 2 lbs., (no extra shipping on this item when ordered with a lift however)


  • Replacement Straps With Hook - Standard strap is 15 ft. long, replacements are available in 15 ft., 20 ft., and 25 ft. long

  • Model PSTH-001: 15 ft. replacement strap with hook, wt. is 5 lbs. - Price is $14.95 plus $9.85 UPS shipping

  • Model PSTH-002: 20 ft. replacement strap with hook, wt. is 5 lbs. - Price is $19.95 plus $9.85 UPS shipping

  • Model PSTH-003: 25 ft. replacement strap with hook, wt. is 5 lbs. - Price is $24.95 plus $9.85 UPS shipping


    • Click Here To Expand This To A Full Page Version

    Click On The Order Form Button Below For Ordering And Payment Information, Please Order In Writing Only Using Our Order Form.


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    Click On The Search Engine Symbol Below
    To Search Wikco.Com Using Our Search Engine

    Click To Search Through www.wikco.com

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: sales@wikco.com

    Wikco.com Inc.
    Please review all information on our web site
    If you have questions, E-Mail us at: sales@wikco.com
    Or Call 520-316-0446 Or Fax us at 520-316-0446


    Email Us at sales@wikco.com

    Copyright © Wikco.Com Inc., 1997-2008 All Rights Reserved