Skid Steer Mounted Hydraulic Powered Tree Saw

Skid Steer Mounted Hydraulic Powered Tree Saw can be used to cut trees or stumps and cut down to ground level (stumps can then be ground below ground level or left at ground level). Model CM140 Tree saw uses a 28 inch diameter x 3/8 inch thick blade with 15 welded teeth. The teeth are still replaceable (grind or cut off the old teeth and weld the new teeth into place). The blade on the CM140 tree saw turns at 200 rpm for safety and ease of handling. The CM140 skid steer mounted hydraulic tree saw will accomodate trees up to 16 inches straight through and larger ones if the skid steer is rotated.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Skid Steer Mounted Hydraulic Powered Tree Saw

  • Features/Specifications


  • Connects to your skid steer loader with quick attach mountings

  • Hydraulically powered tree saw powered by your skid steer loader's hydraulic system, just 2 hoses to connect and you are ready to go

  • Comes with 3/4 inch diameter hoses (less couplers)

  • Powered by an Eaton 10,000 series hydraulic motor with 2 1/4 inch output shaft and direct drive

  • Pounds of torque produced by motor varies with your slid steer loaders hydraulic capacity as follows: at 16 gallons per minute (gpm) you get 3800 lbs. of torque; 18 gpm - 4300 lbs. torque; 19 gpm - 5400 lbs. of torque; 20 gpm - 9400 lbs. of torque; 22 gpm - 11,000 lbs. of torque

  • Uses large 28 inch diameter x 3/8 inch thick steel blade with 15 carbide teeth to power through trees

  • Blade rotates at only 200 rpm for safety and ease of handling

    • Cuts Off Tall Stumps, Or Trees, And Can Cut Off At Ground Level To Leave A Clean Hole

    Leaves Clean Area Cut Tree Off At Ground Level
  • Cabide teeth are welded solid to wheel but are replaceable by cutting and welding back onto the wheel

    • Heavy Duty Saw Blade With Replaceable, Welded In Carbide Cutting Teeth

  • Heavy duty unit has a 1 year manufacturer's warranty


  • The unit includes a tree guard to deflect any trees that might fall back towards the skid steer loader

    • Tree Guard Deflects Trees Away From Skid Steer Loader For Maximum Safety

  • Model CM140: CM140 skid steer loader mounted tree saw, for cutting trees and tall stumps to ground level, with large 28 inch diameter cutting blade with replaceable carbide teeth, uses 15 welded in carbide teeth, skid steer must have a minimum of 18 gpm for optimal performance, wt. is 585 lbs. - Price is $6549.00 delivered

  • Accessories

  • Model CMTooth: Weld-in replacement tooth (15 required) - Price is $10.00 each plus UPS

  • Model CMBlade: Compete replacement blade with teeth - Price is $499.00 plus shipping

    • Click Here To Expand This To A Full Page Version

    Click On The Order Form Button Below For Ordering And Payment Information, Or Click On The Home Button For Links To All Departments And Customer Service Information - Thank You


    Order Form

    Home Page/Index
    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    Click On The Search Engine Symbol Below
    To Search Wikco.Com Using Our Search Engine

    Click To Search Through www.wikco.com

    For Technical Questions or Parts Information
    e-mail us at sales@wikco.com, or
    call the Technical Department at 520-316-0446

    Wikco.com Inc.
    1467 N Grant Ave., Casa Grande AZ 85222
    Call Toll Free: 866-464-8893 (U.S.)
    Outside The U.S.: 480-635-9437
    Fax number is 480-635-9437


    Email Us at sales@wikco.com

    Copyright © Wikco.Com Inc., 1997-2007 All Rights Reserved