Wheel Pro Automatic Motorcycle Wheel Chock

The Wikco Wheel Pro Automatic Motorcycle Wheel Chock With Quick Release Mounting Plate allows you to load and unload your bike by yourself. Drive your bike in, and the wheel cradle holds your bike upright so you can get off and strap it in place. The Wheel Pro Wheel Chock mounts to your trailer or pickup bed by bolting the mounting plate in place with 4 bolts. The wheel chock quick release mounts to the mounting plate so the chock can be easily removed when not in use. The Wheel Pro is made by Wikco In The USA., unlike some similar looking units on the market that are imported.

Both Photos Above Show The Optional Strap Hook Accessory Mounted Under The Mounting Plate

• Features/Specifications



• Automatic Motorcycle Wheel Chock that can be detached easily from the mounting plate by loosening 2 bolts



• Automatic wheel chock allows you to load and unload your bike by yourself and holds it upright so you can get off and tie it down. Optional ratchet strap holders are available that can be used 2 ways. You can mount them under the mounting plate when you bolt it to your trailer or pickup and then use any standard rachet strap (not provided) and run the strap over the wheel to hold the bike in the chock. You can also bolt the ratchet strap holders wider out on your bed so you strap your bike in place if you want to use straps on the handle bars.



• The Wheel Pro works on virtually all standard motorcycles including: Harley Davidson and other American and Japanese cruiser bikes, sport bikes, and off-road and dirt bikes, the only acceptions are some choppers and new and old Indian Chief models, and the Kawasaki models with the low wrap around fenders. It will still work with most Harley Davidsons and Honda Gold Wings with the optional mud flaps. The Wheel Pro will still work on most sport bikes with the aerodynamic air dam in front and valanced fenders - recently tested on, the 2006 Suzuki Hayabusa.



• All steel construction on wheel chock with gloss black powder coat finish. The wheel cradle can be bolted to the upper frame in three different heights, to fit most wheels



• Black powder coated mounting plate is 15 1/2 inches long and 10 1/2 inches wide, the black powder coated removable wheel frame is 9 3/4 inches at widest point, wheel chock must be mounted on a flat surface and both the unit mounted on the plate or just the chrome frame is normally too wide to be mounted in pre-existing wheel tracks on most trailers, so make note of these dimensions, and measure your application before you order.



• Optional ratchet strap mounting hooks allow you to use any standard ratchet strap with a hook on the end to either run a strap over the front wheel (when the hooks are mounted under the mounting plate), or bolt the strap hooks out wider on the trailer floor or pickup bed and run straps down from the handlebars



• The universal wheel cradle holds most bikes securely upright that have a tire wider than 3.5 inches. For tires 3.5 inches wide or narrower, we offer the narrow tire kit. The kit contains 4 nylon blocks with mounting bolts to securely hold the narrower tires (again, 3.5 inches and narrower).






• Model MC9205: Wikco Wheel Pro Automatic Motorcycle Wheel Chock, black powder coated wheel cradle and mounting plate, upper wheel wheel cradle can be removed to prevent theft and so you can use it on other trailers, if you purchase additional mounting plates - Price is $159.00 delivered (price includes shipping), ships by UPS



• Accessories


The Photo Above Shows The Optional Strap Hooks Mounted Under The Mounting Plate



• Model MC9205SH: Optional Strap Hooks (2 per set), either mount under the mounting plate so you can use a ratchet strap over the front tire to hold your bike in the chock, or can be bolted out wider on the trailer floor or pickup bed so you can run the straps from your handle bars if necessary - Price is $29.95 delivered, ships by UPS



• Model MC9205MP: Extra Mounting Plate, order this if you want extra plates so you can use the wheel chock in other vehicles or trailers - Price is $41.95 delivered, shipped by UPS



  
• Model MC9205TK: Narrow tire kit for bikes with tires 3.5 inches wide or narrower, 4 nylon blocks plus hardware - Price is $29.95 delivered, ships by UPS



Click Here To Expand This To A Full Page Version



Wikco.Com is a national equipment dealer selling direct to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information
Please Order In Writing Only Using Our Order Form.


  

If Our Index Doesnot Appear On The Left Side Of This Page
Then Click On The Home Button Above To See The Many Other Products We Sell


For Sales or Technical Questions, Parts Information, Or To Check On An Order
Please E-Mail us at: sales@wikco.com
Please review all information on our web site
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446




Wikco.com Inc.


Copyright © Wikco.Com Inc., 1997-2009 All Rights Reserved