The Coats Model XR 1750 Wheel Balancer is contructed on the Coats' new XR platform; it is a non-diagnostic model designed to give a shop a cost-efficient, front line balancer - which can be just as important for shop profitability. The unit uses the speedy and ergonomic XR platform and utilizes a video screen that has real-time 3-D graphics (2-D on the value model), visual cues, and help screens that guide the tech through the balancing process. The XR 1750 is the perfect machine for shops needing and easy-to-use non-diagnostic balancer. The XR 1750 is available in three versions: A value model with 2-D data entry, and the 3D versions with and without onboard air supply.
The XR 1750 automatically takes the A, W, and D measurements, there is no need for an outer arm
Two versions offer 3-D graphics, (Model XR 1750 2-D has 2-D auto data entry), visual cues and help screens to guide the technician throughout the balancing process, including Coats' Static On Screen display that gives the technician an unprecendented amount of information. The 3DI configuration also gives you an onboard air supply on the unit.
The XR 1750 also has direct Tape-A-Weight and behind-the-spoke balancing modes
XR 1750 has 12 balancing modes
Maximum tire diameter balancer can accomodate is 44 inches, rim width from 2 to 20 inches, Maximum tire weight of 160 lbs.
Balancer shaft diameter is 40mm
Resolution is 0.01 ounce
Accuracy is .01 ounce
Power is 115 Volt AC, single phase
Footprint: 60 inches wide by 52 inches deep
Shipping weight is 625 lbs.
Please Note: Balancers Do Not Come With Cone Kits - See The Listing Below Under Accessories
Model XR 1750-2D: The value model with 2-D auto entry, foot pedal, and all other standard features (Takes A, W, And D measurements, Direct Tape-A-Weight and behind the spoke balancing modes), 115 volt AC single phase, 40mm shaft with speed nut - Price is $6088.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model XR 1750-3D: Includes 3-D auto data entry, food pedal, and all other standard features, 40mm shaft with speed nut - Price is $6670.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model XR 1750-3DI: Includes the full range of enhancements including 3-D auto data entry, onboard air supply, foot pedal to hold the wheel in position, and all other standard features, 40mm shaft with speed nut - Price is $7106.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model 8113428: Standard passenger car cone kit with wheel weight hammer and calipers - Price is $695.00 delivered
Model 8113593: Adapters for passenger cars through light trucks, includes - standard cone kit, wheel weight hammer, calipers, 40 mm pin plate system, application chart, hole gauge, Balancer Mate Storage System - Price is $3595.00 delivered
Model 8113594: Adapters for passenger cars through medium duty trucks, includes - standard cone kit, wheel weight hammer, calipers, 40mm pin plate system, application chart, hole gauge, Balancer Mate storage system, light cone truck kit and balancer chuck - Price is $5095.00 delivered
Model 8111934: Model 520 wheel lift for Coats Balancers, standard configuration is free standing and would need to be bolted to the floor close to the balancer so you can slide the tire onto the balancer shaft, optional link accessory listed below will connect the wheel lift to your balancer - Price is $2585.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states), ships by truck
Model 8113592: Link for model 520 wheel lift, connectslift to Coats 950, 1050, and XR Series Balancers, and eliminates bolting lift to floor (doesnot fit ISB2000 balancers) - Price is $269.00 delivered
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446