The Coats Model XR 1800 is one of their newest Diagnostic Automotive Wheel Balancers and allows you to solve the toughest balancing problems in the easiest ways. The XR 1800 makes it possible for technicians to check every wheel for conditions such as runnout that can make balancing difficult. A complete diagnostics package runs with every wheel balance, adding just 2-3 seconds to the process, and notifies the technician if there is a problem that can affect balance quality.
All these features are accessed via an easy to use CRT monitor display that is made easy to operate with real-time 3-D animated graphics and visual clues; extra care has been given to simplifying the interface with the machine, so even a technician with minimal experience can spot and correct difficult balancing situations, or accommodate cutomer requests like behind the spoke weight placement. Wheel balancing is much more complicated than it was even 5 years ago, with low profile tires, stiffer frames and tighter suspensions, closer brake tolerances, and other factors mean that there are more ways for vibration to occur. The XR 1800 automatically takes the A, W, and D measurements; also included are modes for direct Tape A Weight location and behind the spoke weight placement. The Coats Model XR 1800 is even air equipped, so you don't have to go to a tire changer for rotate and balance jobs.
Features/Specifications
Has 12 balancing modes, unit is controlled by a full video display in 2-D and 3-D modes. The screen provides clear directions and operator prompts for easy balancing
Simultaneous display of static and dynamic data - indentifies any excess residual static imbalance
Diagnostic suite for radial runnout to solve difficult vibration problems, adds just 2-3 seconds to cycle time
Real-time 3-D animated graphics and visual cues
12 balancing modes with several alloy options, plus patch balance and PAX
Multiple operator feature allows up to four technicans to work at once
Has an easy command selection with a simple numbered button system
Has a convenient on-board air supply for rotate and balance jobs
Features Direct Tape-A-Weight placement, can do most Tape-A-Weight jobs in just one spin
Handles wheels with a maximum tire diameter of up to 44 inches, a rim width of 2 to 20 inches, and a maximum tire weight of 160 lbs.
Has a shaft diameter of 40mm
Resolution is 0.01 ounce, accuracy is 0.01 ounce
Power requirement is 115 volt AC, single phase
Has a footprint of 60 inches wide x 52 inches deep, weight is 625 lbs.
Includes and accessories carousel, a removable sliding tool tray and side storage pegs offering huge amounts of convenient storage
PLEASE NOTE: IN ADDITION TO THE BALANCER, YOU NEED TO PURCHASE AT LEAST ONE OF THE THREE CHOICES OF ADAPTER (CONE) KITS LISTED IN ACCESSORIES - THE BALANCER DOESNOT COME WITH ANY CONES
Model 85000011: XR 1800 Coats Wheel Balancer, 115 Volt, single phase, with 40mm shaft, (one of the adapter kits listed below must also be purchased), wt. is 680 lbs. - Price is $9468.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model 8113428: Standard passenger car cone kit with wheel weight hammer and calipers - Price is $695.00 delivered, ships by UPS
Model 8113593: Adapters for passenger cars through light trucks, includes - standard cone kit, wheel weight hammer, calipers, 40 mm pin plate system, application chart, hole gauge, Balancer Mate Storage System - Price is $3595.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model 8113594: Adapters for passenger cars through medium duty trucks, includes - standard cone kit, wheel weight hammer, calipers, 40mm pin plate system, application chart, hole gauge, Balancer Mate storage system, light cone truck kit and balancer chuck - Price is $5095.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model 8111934: Model 520 wheel lift for Coats Balancers, standard configuration is free standing and would need to be bolted to the floor close to the balancer so you can slide the tire onto the balancer shaft, optional link accessory listed below will connect the wheel lift to your balancer - Price is $2595.00delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by truck
Model 8113592: Link for model 520 wheel lift, connectslift to Coats 950, 1050, and XR Series Balancers, and eliminates bolting lift to floor (doesnot fit ISB2000 balancers) - Price is $269.00 delivered (price includes shipping to commercial and residential addresses with normal delivery access in the U.S. 48 states, locations in Alaska, Hawaii and outside the U.S. require extra shipping cost), ships by UPS
We make every effort to keep prices current and correct as shown on our product pages. Prices do change frequently however; we will notify you of any changes when we receive your order so you can make any adjustments or changes to the order. We are not responsible for information or pricing on copies of our web pages on the search engines that are out of date. If you navigated to this page by clicking a link in the search engine listings, then click on the reload button on your browser to make sure you are viewing a current version of this page from our website. You can also go to www.wikco.com and link to this page from our index.
Wikco.Com is a national equipment dealer selling directly to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information, And Information On Any Cash Discounts That May Be Available
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
All information is on our web site at: www.wikco.com
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446