Skid Steer Mounted Tine Grapple

The ETG Series Skid Steer Or Tractor Loader Tine Grapple is a brush grapple that will mount on skid loaders or tractor loaders that have the universal skid steer quick attach mount on the bucket. This grapple is designed for 30 to 80 hp skid or tractor loaders. Two models are available: model ETG-5 has a width of 61.5 inches, and model ETG-6 has a width of 71.75 inches; both models have a depth (tine length from back of 35.5 inches so you can scoup up and carry large piles of brush, logs, and other debris. The 10 inches of space between each tine allows you to get up under debris piles and leave any dirt behind.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Skid Steer Tine Grapple   ETG Series Skid Steer Tine Grapple In Closed Position

Six Foot Wide Skid Steer Mount Grapple With Twin Upper Grapples, Each 20 Inches Wide


  • Features/Specifications


  • ETG Series Skid Steer Tine Grapple

    ETG Series Skid Steer Tine Grapple In Closed Position
  • Designed for 30-80 horsepower front loader or skid steer loader utilizing the universal skid steer attaching system


  • Ideal for raking, piling, and loading brush and other hard to handle materials while leaving the dirt behind due to the widely spaced (10 inch) tines


  • Upper grapple provides secure clamping force to keep your load in place


  • Greasable pivot points on upper grapple for long service life


  • Low profile design offers great forward visibility for superior control in close quarters and easy access to skid steer seat


  • Shield plate on upper grapple provides protection for hydraulic cylinder


  • Specifications ETG Series Tine Grapple
  • Model WOETG-5: Low profile universal skid steer tine grapple for 30-80 hp skid steer and tractor from loaders, 61 inch wide grapple with single upper grapple, has 7 tines spaced 10 inches apart to allow dirt to fall out of grapple when loading debris, hydraulic cylinder includes hoses and flat faced quick couplers, and has guard over cylinder, wt. is 492 lbs.

    Click the link below for a price quote


  • Order Form

  • Model WOETG-6: Low profile universal skid steer tine grapple for 30-80 hp skid steer and tractor from loaders, 72 inch wide grapple with single upper grapple, has 8 tines spaced 10 inches apart to allow dirt to fall out of grapple when loading debris, hydraulic cylinder includes hoses and flat faced quick couplers, and has guard over cylinder, wt. is 520 lbs.

    Click on the link below for a price quote


  • Order Form

    Six Foot Wide Skid Steer Mount Grapple With Twin Upper Grapples, Each 20 Inches Wide

    Six Foot Wide Skid Steer Mount Grapple With Twin Upper Grapples, Each 20 Inches Wide


  • Model WOETG-26: ETG-26 skid steer mount grapple six ft. wide, with twin upper grapples each 20 inches wide, 8 lower tines are spaced 10 inches apart, outer tines are made from 1/2 inch material, while all other tines are made with 3/8 inch thick material, unit wt. is 615 lbs. - Click on the link below for a price quote


  • Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is a national equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information


    Order Form

    Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation