Mole, Tractor Mounted Post Hole Diggers are available in a series to fit almost any tractor. Series 100 digger is for sub-compact tractors such as the DX series Kubota and John Deere 2210 that have a 540 rpm pto, and a category 0 three point hitch (or a category 1 limited which is the same as a category 0 hitch). For larger compact and landscape and farm size tractors from 18-75 hp with a category 1 or 2 three point hitch and 540 rpm pto, we offer the 200, 300, and 400 series diggers. Model 200-512 post hole auger is probably best for tractors with 18 to about 35 hp, the model 300-512 earth auger is best for tractors 30 hp and up (can be used on category 1 or 2 three point hitches), and the 400 series earth auger is probably best for tractors 45-75 hp (works on category 1 or 2 three point hitches). Augers are available for all models, and augers have replaceable knives and point.
Heavy duty boom and yoke for extra strength and long lasting service
Four different power head series are available, 100-512, 200-512, 300-512, and 400-512
The 100 series digger is designed for the new sub-compact tractors such as DX series Kubota and 2210 John Deere. Series 100 Digger Head is compatable with both category 0 and 1 three point hitches.
The 200, 300, and 400 series are for compact and larger tractors with standard category category 1 three point hitch for the 200 series, and category 1 and 2 on the 300 and 400 series, and 540 rpm pto on all units. The 200, 300, and 400 series units are for tractors from 18 to 75 hp.
Choice of augers for the 100 series are 6 inch or 9 inch diameter x 36 inches long
Choice of 6 inch, 9 inch, 12 inch, 18 inch and 24 inch augers for the 200 and 300 series, and 6, 9, 12, 18, 24, and 30 inches for the 400 series digger
Individually replaceable knives and point
Fully welded flighting
Reinforced mounted collar on all augers
Safety shielding around auger and pto
2 inch output shaft on gearboxes
Heavy duty shielded pto shaft (1 3/8 inch ASAE cat. 2 on model 200, and cat. 3 on model 300)
Model 100-512: Digger head for sub-compact tractors with category 0 (or limited category 1 class) and category 1, three point hitches, requires 540 rpm pto shaft, boom outside diameter is 2 7/8 inches, yoke outside diameter is 2 3/8 inches, auger rpm is 180, gear ratio is 3:1, output shaft is 1 3/8 inch diameter with a 5/8 inch bushing (allows use of augers that require the 2 inch round output shafts - all listed below), wt. is 112 lbs. - Price is $1085.00 delivered (price includes shipping to commercial and residential addresses), ships by truck
Model 200-512: Digger head for compact and larger tractors up to 50 hp (category 1 three point hitch only), 540 rpm pto, boom outside diameter 3 1/2 inches, yoke outside diameter 2 7/8 inches, auger rpm 180, gear ratio 3:1, wt. 170 lbs. - Price is $1157.00 delivered (price includes shipping to commercial and residential addresses), ships by truck
Model 300-512: Digger head for tractors with category 1 or 2 three point hitches (tractor hp up through 75 hp), requires 540 rpm pto, boom outside diameter 3 1/2 inches and is reinforced, yoke outside diameter 2 7/8 inches and is reinforced, auger rpm 154, gear ratio 3.5:1, wt. 154 lbs. - Price is $1359.00 delivered (price includes shipping to commercial and residential addresses), ships by truck
Model 400-512: Digger head for compact and larger tractors up to 75 hp, and mounts on either category 1 or 2 three point hitches, recommended for tractors 45 hp and up, boom outside diameter is 3 1/2 inches reinforced, yoke outside diameter is 2 7/8 inches and is reinforced, auger rpm is 135, gear ratio is 4:1, wt. is 230 lbs. - Price is $1619.00 delivered (price includes shipping to commercial and residential addresses), ships by truck
Accessories
Augers listed below that go with the mole digger head have a round female connector for a 2" round shaft
Augers For 100 Series Diggers Only
106-531: Auger diameter is 6 inches, 36 inches long, wt. is 30 lbs., single flighting on auger, 3/16 inch thick- Price is $249.00 plus $20.00 UPS shipping, (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
109-531: Auger diameter is 9 inches, 36 inches long, wt. is 40 lbs., double flighting on auger, 3/16 inch thick - Price is $259.00 plus $22.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
112-531: Auger diameter is 12 inches, 36 inches long, wt. is 48 lbs., double flighting on auger, 3/16 inch thick - Price is $335.00 plus $30.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
Augers For 200, 300, and 400 series diggers only
206-531: auger diameter 6 inches, 48 inches long, wt. is 32 lbs., single flighting on auger, 3/16 inch thick - Price is $256.00 plus $20.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
209-531: auger diameter 9 inches, 48 inches long, wt. is 55 lbs., double flighting on auger, 3/16 inch thick - Price is $294.00 plus $35.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
212-531: auger diameter 12 inches, 48 inches long, wt. is 75 lbs., double flighting on auger, 3/16 inch thick - Price is $349.00 plus $45.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
218-531: auger diameter 18 inches, 48 inches long, wt. is 80 lbs., double flighting on auger, 1/4 inch thick, - Price is $474.00 plus $125.00 shipping, ships by truck (except no extra shipping for the auger if it is ordered at the same time as a digger head) - This auger is available for digger heads 300-512 and 400-512 only
224-531: auger diameter 24 inches, 48 inches long, wt. is 105 lbs., double flighting on auger, 1/4 inch thick, available only for Mole model 300-512 - Price is $639.00 plus $125.00 shipping, ships by truck (except, no extra shipping for the auger if it is ordered at the same time as a digger head) - This auger is available for digger heads 300-512 and 400-512 only
230-531: auger diameter of 30 inches, 44 inches long, wt. is 230 lbs., double flighting on auger, 5/16 inch thick,
- Price is $1225.00 plus $175.00 shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head) - This auger is available for digger heads 300-512 and 400-512 only
Optional Equipment
Model PHD-001: Post hole digger stand (200-512, 300-512, and 400-512 models) - Price is $205.00 plus $35.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
Model PHD-004: Post hole digger stand (100-512 model) - Price is $205.00 plus $35.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
Model 009-9851: Auger positioning stand, the post hole digger stands are for storing the auger as you bolt the auger to the stand. This positioning stand just holds the unit in place (not bolted to the stand) so it it upright and ready to be easily hooked to your tractor - Price is $345.00 plus $35.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
Model PHD-002: Hydraulic down force kit (for models 300-512, and 400-512) - Price is $485.00 plus $30.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
Model PHD-005: Hydraulic down force kit (for model 200-512) - Price is $475.00 plus $30.00 UPS shipping (except, no extra shipping for the auger if it is ordered at the same time as a digger head)
Model PHD-003: Auger positioning Handle (fits all models) - Price is $125.00 plus $15.00 UPS shipping (no extra shipping for the auger if it is ordered at the same time as a digger head)
Wikco.Com is a national equipment dealer selling direct to the end user
To Order: Click On The Order Form Button Below For Ordering And Payment Information
Please Order In Writing Only Using Our Order Form.
If Our Index Doesnot Appear On The Left Side Of This Page Then Click On The Home Button Above To See The Many Other Products We Sell
For Sales or Technical Questions, Parts Information, Or To Check On An Order Please E-Mail us at: sales@wikco.com
Please review all information on our web site
If you have additional questions, please call us at 520-316-0446 Or Fax us at 520-316-0446