Brush Rake Grapple Rake

The Brush Rake Grapple Rake mounts on the loader arms of your skid steer or tractor loader. The model 333000 is specifically designed for small and medium utility tractors and skid loaders up through approximately 45 hp.; width is 60 inches. The unit comes without mounting brackets or skid plate which must be welded to the unit (some loader brackets may be able to be attached by U-Bolts but it is best to weld the bracket to the Brush Rake). We offer a large number of different brackets so the model 333 series Brush Rake is adaptable to most loaders. For larger skid steer loaders and tractor loaders we also have the Heavy Duty Series grapple available. This model is available with either single or double grapples and is available in widths of either 72 or 85 inches.

Click Here To Expand This To A Full Page Version

To See Other Products - Click Here To Go To Our Index

Mounts On Most Small To Medium Sized Skid Stee Loaders   Mounts On Most Small To Medium Sized Utility Tractor Loaders
Heavy Duty Single Arm Grapple In Widths Of 72 And 85 Inches - For Larger Skid Loaders And Tractors, Double Model Also Available   Double Grapple Model Available In 72 And 85 Inches Wide

Double Grapple Contractor Model Grapple Rake In 58, 72, And 85 Inches Wide

Standard Series Grapple Rakes

  • Features/Specifications


  • Grapple Rake For Small To Medium Sized Skid Steer Loaders
    Grapple Rake For Loaders On Small To Medium Sized Utility Tractors
  • Rake construction is of 1/2 inch steel plate and weighs approximately 300 lbs., leaving plenty of lifting capacity on your skid steer or tractor


  • The brush rake is 60 inches wide and the grapple teeth open to give you a 52 inch tall opening


  • The Brush Rake In Use
    The Brush Rake In Use
  • The brush rake can be mounted to most small and medium sized skid steer loaders and tractor loaders; it comes WITHOUT LOADING BRACKETS, we have most available. Brackets have to be purchased separately and then welded on.


  • Model 333S60: Brush Rake Grapple, 60 inches wide, has one grapple section with 9 rake tines, fits most loaders on small to medium utility tractors and skid steers, wt. is 300 lbs.

    Click the link below for a price quote


  • Order Form

    Contractor Series Grapple Rakes

    Double Grapple Contractor Model Grapple Rake In 58, 72, And 85 Inches Wide

  • The Contractor Series is a very well designed grapple rake that can handle everyday heavy use


  • The rake is made from 5/8 inch GR50 high strength steel


  • The subsoil points increase the life of the rake tines


  • This rake is designed to fit larger tractors from 75 to 100 hp and skid steer loaders with 2000 to 2700 lbs. lift capacity


  • The unit is available in either a single or double grapple configuration in widths of 58, 72, and 85 inches


  • It has an extra wide mouth opening of 73 inches, and the grapple will except a large round bale of hay


  • The grapple has 9 rake tines on the 58 inch width, 11 rake tines on the 72 inch width, and 13 rake tines on the 85 inch width, the lower stationary tines are all spaced 6 inches apart


  • The cylinders are concealed and shielded for maximum protection, units are fully plumbed with hose protection


  • The grapple has greased pivot points


  • Subsoil points are replaceable


  • Models weigh from 856 lbs. to 1084 lbs. as listed, all units ship by truck


  • Model C433S58: Contractor model grapple rake, single grapple section 58 inches wide, includes hose kit, concealed hydraulic cylinders with guards, has 9 rake tines, wt. is 856 lbs. - Click the link below for a price quote


  • Order Form

  • Model C433D58: Contractor model grapple rake, double grapple section 58 inches wide, includes hose kit, concealed hydraulic cylinders with guards, has 9 rake tines, wt. is 884 lbs. -Click the link below for for a price quote


  • Order Form

  • Model C433S72: Contractor model grapple rake, single grapple section 72 inches wide, includes hose kit, concealed hydraulic cylinders with guards, has 11 rake tines, wt. is 968 lbs. - Click the link below for a price quote


  • Order Form

  • Model C433D72: Contractor model grapple rake, double grapple section 72 inches wide, includes hose kit, concealed hydraulic cylinders with guards, has 11 rake tines, wt. is 996 lbs. - Click the link below for a price quote


  • Order Form

  • Model C433S85: Contractor model grapple rake, single grapple section 85 inches wide, includes hose kit, concealed hydraulic cylinders with guards, has 13 rake tines, wt. is 1084 lbs. - Click the link below for a price quote


  • Order Form

  • Model C433D85: Contractor model grapple rake, double grapple section 85 inches wide, includes hose kit, concealed hydraulic cylinders with guards, has 13 rake tines, wt. is 1073 lbs. - Click the link below for a price quote


  • Order Form

    Heavy Duty Series Grapple Rakes

  • Heavy Duty Grapple Rake 72 And 85 Inches Wide


  • Heavy Duty Single Arm Grapple In Widths Of 72 And 85 Inches - For Larger Skid Loaders And Tractors, Double Model Also Available
  • Heavy duty grapple available in widths of 72 and 85 inches, grapple has a large vertical opening distance of 70 inches with tines fully open


  • Designed for larger skid loaders and tractor loaders with up to 3000 lbs. lift capacity


  • 6 inch spacing between tines, rake made out of 3/4 inch steel, points on end of tines to go below the ground to pick up brush piles cleanly off of ground


  • Unit is fully plumbed with hose protection, cylinders are also protected by being concealed within the grapple frame


  • Available in both single and double grapple models


  • Mounting brackets are required and will have to be welded to back of frame of unit


  • Double Grapple Model Available In 72 And 85 Inches Wide

    Curved Tine Design Great For Picking Up Round Hay Bales

    72 Inch Wide Double Grapple Model Shown On Trac Loader

  • Model HD444D72: 72 inch wide double grapple model, has two cylinders, all cylinders are enclosed, comes with hoses only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1186 lbs.

    Click the link below for current price, and/or to order.


  • Order Form

  • Model HD444S72: 72 inch wide single grapple model, has two cylinders, all cylinders are enclosed, comes with hoses, only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1133 lbs.

    Click the link below for current price, and/or to order.


  • Order Form

  • Model HD444D85: 85 inch wide double grapple model, has two cylinders, all cylinders are enclosed, comes with hoses, only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1190 lbs.

    Click the link below for current price, and/or to order.


  • Order Form

  • Model HD444S85: 85 inch wide single grapple model, has two cylinders, all cylinders are enclosed, comes with hoses, only requires one hydraulic outlet (2 hoses to plug in), you have to supply quick couplers as well as mounting brackets, see our available brackets below, wt. is 1142 lbs.

    Click the link below for current price, and/or to order.


  • Order Form

    Optional Loading Brackets Available

    Available Factory Adapter Brackets

  • Model JD400/500: Set of weld-on adapter brackets for mounting grapple to John Deere 400 and 500 series loaders, wt. is 50 lbs. - Click the link below for current price, and/or to order.


  • Order Form

  • Model JD600/700: Set of weld-on adapter brackets for mounting grapple to John Deere 600 and 700 series loaders, wt. is 75 lbs. - Click the link below for current price


  • Order Form

  • Model WW-BRKT: Set of weld-on adapter brackets for mounting on tractor loaders that require World Wide (Euro) brackets or John Deere Global brackets, wt. is 48 lbs. - Click the link below for a price quote


  • Order Form

  • Model SS1100: Universal weld-on skid plate bracket for all tractor loaders or skid steer loaders with buckets that have the universal skid steer loader quick attach connector, wt. is 42 lbs. - Click the link below for a price quote


  • Order Form

    UB1000 Set of weld-on, pin-type mounting brackets

  • Model UB1000: Set of weld-on adapter brackets, universal pin-on type bucket connection brackets, wt. is 47 lbs. - Click the link below for a price quote


  • Order Form

  • Other Loader Brackets That Are Available


  • Several adapter bracket sets such as skid steer brackets are in the drop down menu on the order page for the grapples listed above. The list below shows the available tractor loader brackets available. If you need a quick attach type loader bracket, the list below contains the brackets we have available. The model numbers listed are the model numbers of the tractor's loader; over 90 different brackets are available. If you need one of these, click the order form button below the list to go to the order page for quick attach brackets.


  • Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms

    Available Loader Brackets To Attach Grapples And attachments To Loader Arms
    If you need a quick attach type loader bracket, the list above contains the brackets we have available. The model numbers listed are the model numbers of the tractor's loader; over 90 different brackets are available. If you need one of these, make note on the order form the model number of the bracket you need/and the model of the loader you have. Order Form

    Click Here To Expand This To A Full Page Version

    Wikco.Com is an equipment dealer selling directly to the end user
    To Order: Click On The Order Form Button Directly Below For Ordering And Payment Information


    Order Form   Home Page/Index

    If Our Index Doesnot Appear On The Left Side Of This Page
    Then Click On The Home Button Above To See The Many Other Products We Sell

    For Sales or Technical Questions, Parts Information, Or To Check On An Order
    Please E-Mail us at: wikcocom@msn.com
    All information is on our web site at: www.wikco.com
    If you have additional questions,

    Click Here For Our Contact Information


    Wikco.com Inc.

    Copyright © Wikco.Com Inc., 1997 to present - All Rights Reserved, A U.S. Corporation